New NIMS Data Sheets Released

—Five Publications Include a Corrosion Data Sheet Covering the Results of Carbon Steel Atmospheric Exposure Tests Conducted at 16 Japanese Sites—

2019.04.01

National Institute for Materials Science (NIMS)

The National Institute for Materials Science (NIMS) released five FY2018 structural materials data sheets on March 31, 2019. This series of data sheets has been used by industry as a fundamental source of data in determining appropriate design stress and selecting proper materials when designing machines and structures of adequate strength.

Abstract

(1) Photographs of microstructure of heat-resistant steel creep test material for thermal power plant

NIMS CREEP DATA SHEET No.M-12
MICROGRAPHS AND MICROSTRUCTURAL CHARACTERISTICS OF CREPT SPECIMENS OF 25Cr-20Ni-Nb-N STAINLESS STEEL TUBE FOR POWER BOILERS (KA-SUS 310J1 TB)

(2) Fatigue data sheets on aluminum alloys

NIMS FATIGUE DATA SHEET No.126
DATA SHEET ON GIGA-CYCLE FATIGUE PROPERTIES OF　
A7075-T6 (Al-5.6Zn-2.5Mg-1.6Cu) ALUMINIUM ALLOY AT HIGH STRESS RATIOS

(3) Atlas of cross-sectional image of rust formed on samples exposed to outdoors

NIMS CORROSION DATA SHEET No.CoF-3
CROSS-SECTION OF RUST ON Fe-Cr AND Fe-Ni BINARY ALLOYS AFTER EXPOSURE TEST FOR 1.0 YEARS

(4) Data sheet on atmospheric corrosion properties of carbon steels

NIMS CORROSION DATA SHEET No.6
- EFFECT OF ATMOSPHERIC ENVIRONMENTAL FACTORS –

(5) Space use materials strength data sheet on Alloy 718 base metal and welded joint

NIMS SPACE USE MATERIALS STRENGTH DATA SHEET No. 28
DATA SHEET ON LOW-CYCLE FATIGUE PROPERTIES OF ALLOY 718 (1338 K ST) BASE METAL AND WELDED JOINTS
NIMS structural materials data sheets contain various types of data (e.g., creep, fatigue, corrosion and cryogenic fatigue properties) collected systematically and without bias using standardized testing methods. For more than 30 years, these data sheets have provided industry with fundamental data for determining appropriate design stress and selecting proper materials to enable the design of machines and structures of adequate strength. They have also been used as reference materials to estimate the degree of deterioration and the remaining life of various materials in use. We hope that the new data sheets will continue to serve widely as an industrial standard in strength design and materials selection for various types of products.

Related File / Link

Contacts

(Regarding data sheets)

(1) Creep data sheets
Kota Sawada
Materials Strength Standards and Technology Group
Research Center for Structural Materials (RCSM)
National Institute for Materials Science
Tel: +81-29-859-2224
Fax: +81-29-859-2830
E-Mail: SAWADA.Kota=nims.go.jp
(Please change "=" to "@")
(2) Fatigue data sheets
Yoshiyuki Furuya
Fatigue Properties Group
Research Center for Structural Materials (RCSM)
National Institute for Materials Science
Tel: +81-29-859-2298
Fax: +81-29-859-2830
E-Mail: FURUYA.Yoshiyuki=nims.go.jp
(Please change "=" to "@")
(3) Corrosion data sheets
Hideki Katayama
Corrosion Property Group
Research Center for Structural Materials (RCSM)
National Institute for Materials Science
Tel: +81-29-859-2541
Fax: +81-29-859-2830
E-Mail: KATAYAMA.Hideki=nims.go.jp
(Please change "=" to "@")
(4) Space use materials strength data sheets
Masao Hayakawa
Environmental Fatigue Property Group
Research Center for Structural Materials (RCSM)
National Institute for Materials Science
TEL: +81-29-859-2243
FAX: +81-29-859-2830
E-Mail: HAYAKAWA.Masao=nims.go.jp
(Please change "=" to "@")

(For general inquiries about these publications)

Public Relations Office
National Institute for Materials Sciences
1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan
Tel: +81-29-859-2026
Fax: +81-29-859-2017
E-Mail: pressrelease=ml.nims.go.jp
(Please change "=" to "@")

Same Keywords

2020.04.01
New NIMS Structural Materials Data Sheets Released (Data Sheets,Issues)
2018.04.05
NIMS Issues New Data Sheets (Data Sheets,Issues)
2017.04.03
NIMS Issues New Data Sheets (Data Sheets)