1. Home
  2. > Research
  3. > Research Highlights
  4. > Vol. 92 MANA Scientists Employ Active ・・・

researchhighlightsResearch Highlights

[Vol. 92]

MANA Scientists Employ Active Machine Learning to Enhance Thermoelectric Performance of Materials

20 Jan, 2025

Scientists from the Research Center for Materials Nanoarchitectonics (MANA) have integrated machine learning with traditional materials science to expedite the discovery of kesterite-type thermoelectric materials, paving the way for efficient energy conversion technologies.

Graphic images Vol.92

Kesterite-type materials, like Cu2ZnSnS4, are promising thermoelectric (TE) materials that convert waste heat into electricity. These non-toxic materials are composed of abundant, easily accessible elements and exhibit a figure of merit (zT), a quantity that measures thermoelectric efficiency, of greater than 1 at temperatures between 300 and 800K (26 to 526°C). Around 500K, kesterites undergo a transition from an ordered to a disordered one cationic structure, which affects their TE properties significantly. However, identifying optimal manufacturing conditions is time-consuming and requires multiple experiments.


Researchers from MANA used machine learning to accelerate this process. In just four experimental cycles, they optimized the sintering process, improving the thermoelectric performance of Cu2.125Zn0.875SnS4 by 60%. The study was led by Dr. Cédric Bourgès from the International Center for Young Scientists, along with Guillaume Lambard from Center for Basic Research on Materials as well as Naoki Sato, Makoto Tachibana, Satoshi Ishii, and Takao Mori from MANA, NIMS, Japan.


The researchers employed Active Learning with Bayesian Optimization (ALMLBO), which analyzes sintering parameters—such as heating rate, sintering temperature, holding time, cooling rate, and applied pressure—alongside thermoelectric properties obtained from experiments. This approach recommended new experimental conditions, and the process was repeated until the thermoelectric properties improved, indicated by a stabilized zT.


The team began with data from 11 samples prepared using spark plasma sintering, combining copper, zinc, tin, and sulfur powders under partial vacuum. The ALMLBO model predicted sintering conditions that achieved a record maximum zT of 0.44 at 725K. “This method showcases how integrating machine learning with traditional materials science accelerates discovery and optimization in complex material systems,” say the authors. This approach has the potential to be extended to other materials, enabling rapid innovations in photovoltaics, batteries, and electronics.



Reference

Journal Acta Materialia
Title Process optimization on kesterite-based ceramics for enhancing their thermoelectric performances assisted by active machine learning approach: A tool for metal-sulfide ceramics development
Authors Cédric Bourgès, Guillaume Lambard, Naoki Sato, Makoto Tachibana , Satoshi Ishii, Takao Mori
Affiliations
  1. International Center for Young Scientists(ICYS), Sengen 1-2-1, Tsukuba, Ibaraki 305-0047, JAPAN
  2. Center for Basic Research on Materiarls (CBRM), 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, JAPAN
  3. Research Center for Materials Nanoarchitectonics (MANA), 1-1 Namiki Tsukuba, Ibaraki 305-0044 JAPAN
DOI 10.1016/j.actamat.2024.120342

Contact information

Research Center for Materials Nanoarchitectonics (MANA)

National Institute for Materials Science
1-1 Namiki, Tsukuba, Ibaraki 305-0044 Japan
Phone: +81-29-860-4710
E-mail: mana-pr[AT]nims.go.jp

To receive our e-mail newsletter “MANA Research Highlights”, please send an e-mail with "MANA Research Highlights request” in the subject line or main text to the following address: mana-pr_at_nims.go.jp *Please change "_at_ " in the email address to @.
Research