Oshiumi T., Osada T., Goto M., Hara T.
Strength recovery and degradation behaviors in Al2O3-based self-healing ceramics with vanadium carbide additives
微細組織解析グループMicrostructure Analysis Group
論文リスト
2026
-
-
Suto H., Katayama K., Tanaka Y., Taparia D., Suwannaharn N., Nakatani T., Sasaki T.T., Yabuta H., Sakuraba Y.
Excimer-laser-annealing-induced crystallization and atomic ordering of Co2Mn0.5Fe0.5Ge Heusler alloy thin films for spintronic applications
-
Hashimoto H., Asano K., Sasaki T.T., Sakaki K., Ohkubo T., Hattori M., Oonuma E., Isobe S.
Element distribution and hydrogen states in Li8Mg8Al28Ti28Nb28 lightweight high entropy alloy before and after hydrogen absorption
-
Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T.
Three-dimensional crystallographic and local variant configuration analysis of lath martensite in medium-carbon steel
-
Wang M., Peng W., Lyalin A., Suwannaharn N., Tsuji T., Matsumura D., Morooka T., Kumeda T., Taketsugu T., Ohkubo T., Masuda T., Sasaki T.T., Sakaushi K.
Nanointerface Coupling Activates Earth-Abundant Elements for Enhanced Oxygen Evolution Electrode Process
-
Yang W.-Y., Yeh C.-W., Ii S., Misra R.D.K., Chiu P.-K., Chung T.-F.
Co-precipitation strengthening behavior on paint-baked Al–Mg–Si–Cu aluminium alloys under combined pre- and natural ageing
2025
-
Abe Y., Tsuru T., Fujita Y., Ohtomo M., Sasaki T.T., Yamashita S., Okubo N., Ukai S.
Effects of Al addition on Vickers hardness increase by thermal aging of Fe–Cr–Al alloys — Evaluation by systematic experiments, machine learning modeling, and first-principles calculations
-
Bainsla L., Sakuraba Y., Kumar A., Chaurasiya A.K., Masuda K., Suwannaharn N., Awad A.A., Behera N., Khymyn R., Sasaki T., Dash S.P., Åkerman J.
Energy-Efficient Single Layer Spin Hall Nano-Oscillators Driven by Berry Curvature
-
Bhattacharyya J.J., Faberman S., Li Z., Sullivan A., Cheng D., Khoury B., Gao Y., Sasaki T., Zhou B., Warner D., Agnew S.R.
Guinier-Preston (GP) zone strengthening of dilute magnesium alloys comprised of earth-abundant elements
-
Bhattacharyya J.J., Faberman S., Sullivan A., Saha M., Sasaki T., Agnew S.R.
Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements
-
Chen H., Egusa D., Li Z., Sasaki T., Ozasa R., Ishimoto T., Okugawa M., Koizumi Y., Nakano T., Abe E.
Phase-separation induced dislocation-network cellular structures in Ti-Zr-Nb-Mo-Ta high-entropy alloy processed by laser powder bed fusion
-
Filimonov A.M., Alam K.M.S., Kvaratskheliya A.R., Grieb T., Sharma B.K., Bianchini B., dos Santos R.F.M., Gomes L.F., Rosenauer A., Gargarella P., Suwannaharn N., Sasaki T.T., Mädler L., Okulov I.V.
Laser processing of a CuTiZr-based alloy by powder bed fusion: From bulk metallic glass to metallic glass composite
-
Gholizadeh R., T. Sasaki T., Chong Y., Yoshida S., Kurokawa S., Tsuji N.
Role of lattice defects in early-stage decomposition of CoCrFeMnNi high-entropy alloy: Mechanisms, kinetics, and transformation pathways
-
Goto M., Sasaki M., Moronaga T., Hara T., Xu Y.
Room-temperature FeSi2-doped Cu2Se thermoelectric films with enhanced figure of merit
-
Hoefler T., Ikeda A., Osada T., Hara T., Kawagishi K., Ohmura T.
Automated system for high-throughput process-structure-property dataset generation of structural materials: A γ/γ′ superalloy case study
-
Hsu W.-C., Saito T., Saha M., Murakami H., Sasaki T., Yeh A.-C.
On the Solidification and Phase Stability of Re-Bearing High-Entropy Superalloys with Hierarchical Microstructures
-
Ii S., Ikeda K.-I., Hara T.
Multi-dimensional quantitative analysis of precipitates in the hot-rolled Al-1%Mn alloy
-
Ishihara K., Ichinokura S., Eremeev S.V., Sasaki T.T., Takada R., Nishimichi H., Akiyama R., Chulkov E.V., Hirahara T.
Manipulation of the anomalous Hall effect in magnetic topological insulator heterostructure MnBi2Te4/Bi2Te3 by Si substrate surface engineering
-
Ishimoto T., Morita N., Ozasa R., Matsugaki A., Gokcekaya O., Higashino S., Tane M., Mayama T., Cho K., Yasuda H.Y., Okugawa M., Koizumi Y., Yoshiya M., Egusa D., Sasaki T., Abe E., Kimizuka H., Ikeo N., Nakano T.
Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design
-
Kato H., Horii Y., Watanabe C., Sasaki T., Ichiyanagi K., Noguchi M., Fujimori H., Yamamoto T., Suzuki H., Hirai Y., Ohmura T., Yano K., Hayashi S., Kajiwara T.
Molecular Thermal Engine Based on a Highly Flexible Elastic Crystal
-
Kautsar Z.H., Sepehri-Amin H., Tang X., Kulesh N., Sasaki T.T., Ohkubo T., Hono K.
Heavy rare earth-free high resistivity and coercivity Nd-Fe-B hot-deformed magnet developed by Pr-Cu diffusion and CaF2-LiF eutectic addition
-
Kikuchi K., Nakata T., Li Z.H., Sasaki T.T., Miyashita Y., Kamado S.
Strategic approach to simultaneously enhance strength, formability, and corrosion-resistance synergy of age-hardenable Mg-Zn-Ca-Al-Mn alloy sheet with low Mn content via optimizing Zn and Ca contents
-
Kvaratskheliya A., Filimonov A., Bianchini B., Jundullah Hanafi M.I., Gesing T.M., Sasaki T.T., Gargarella P., Mädler L., Okulov I.
Making parts on Mars: Laser processing of iron contaminated by regolith simulant
-
Lyu Z., Liu Y., Sciazko A., Komatsu Y., Tao J., Nakamura A., Hara T., Sun K., Shikazono N., Han M.
Co-Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells
-
Makino F., Hirai T., Shiga T., Suto H., Fujihisa H., Oyanagi K., Kobayashi S., Sasaki T., Yagi T., Uchida K.-I., Sakuraba Y.
Magnetothermal resistance effect in a Co50Fe50/Cu multilayer studied via analysis of electron and lattice thermal conductivities
-
Matsuda M., Ohsumi S., Ii S.
Morphological and Crystallographic Features of α' Martensite in Binary Ti–Hf Alloy
-
Mori S., Ii S., Moronaga T., Hara T., Karube K., Taguchi Y., Tokura Y., Yu X.
Direct Observations of Mechanical Strain-Induced Wavevector Switching in a (Fe,Ni,Pd)3P Magnet with Anisotropic Dzyaloshinskii-Moriya Interaction
-
Murata Y., Moronaga T., Egami M., Hayashi K., Nanba S., Hara T., Ohnuma I., Ohmura T.
Accurate measurement of solute profile segregated at steel grain boundary by scanning transmission electron microscope with energy dispersive X-ray spectroscopy
-
Nakatani T., Suwannaharn N., Sasaki T.T.
Fabrication and characterization of single-crystalline CoSn (101¯0) kagome metal thin films for interconnect applications: Structure and anisotropic electrical resistivity
-
Nishio R., Umetani T., Nakamura Y., Sasaki T.T., Shibata A.
Effect of cooling rate after high-temperature heating on the ductility of 19Cr-0.020C-0.015N-0.4Nb stabilized ferritic stainless cast steel
-
Shibata A., Nakamura A., Moronaga T., Okada K., Hara T., Ueji R.
Three-dimensional morphologies, substructures, and crystallography of pearlite in carbon steel
-
Shimizu K., Toda H., Hirayama K., Fujihara H., Tsuru T., Yamaguchi M., Sasaki T.T., Uesugi M., Takeuchi A.
Hydrogen embrittlement in Al–Zn–Mg alloys: Semispontaneous decohesion of precipitates
-
Shimizu K., Yamaguchi M., Akamaru S., Nishimura K., Abe R., Sasaki T.T., Wang Y., Toda H.
Revisiting hydrogen trapping in Mg32(Al, Zn)49 approximant crystal: Influence of chemical disorder
-
Torigoe S., Nakashima Y., Tsuzuki Y., Takata K., Ikeda K.-I., Ii S.
Evolution of microstructures during isothermal annealing in hot-rolled Al-Mn alloys
-
Tozman P., Hrkac G., Patrick C.E., Staunton J.B., Saito T., Sasaki T., Ohkubo T., Sepehri-Amin H.
Effect of Co on twin formation and magnetic properties of Sm(Fe,Ti,V)12 alloys
-
Vidilli A.L., Gomes L.F., Oliveira A.P., Saha M., Sasaki T., Otani L.B., Okulov I., Bolfarini C.
Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion
2024
-
Banno N., Moronaga T., Hara T., Asai K., Yagai T.
In-depth S/TEM observation of Ti-Hf and Ta-Hf-doped Nb3Sn layers
-
Hayama C., Kadowaki M., Murase Y., Katayama H., Hara T., Hara Y., Watanabe H., Shitanda I., Itagaki M.
Effect of P Addition on the Corrosion Resistance of Steels Before and After Rust Formation
-
Hayama C., Kadowaki M., Murase Y., Katayama H., Hara T., Hara Y., Watanabe H., Shitanda I., Itagaki M.
Effect of P Addition on the Corrosion Resistance of Steels before and after Rust Formation
-
Hayashi T., Miyagawa R., Yagi Y., Tanaka K., Ota R., Yamasaki N.Y., Mitsuda K., Maehata K., Hara T.
Design and Development of a 224-pixel TES X-Ray Microcalorimeter System for Microanalysis with STEM
-
Ii S.
Quantitative Characterization by Transmission Electron Microscopy and Its Application to Interfacial Phenomena in Crystalline Materials
-
Li Z.H., Sasaki T.T., Ueji R., Kimura Y., Shibata A., Ohkubo T., Hono K.
Role of deformation on the hydrogen trapping in the pearlitic steel
-
Lyu Z., Liu Y., Sciazko A., Komatsu Y., Tao J., Nakamura A., Hara T., Sun K., Shikazono N., Han M.
Co-Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells
-
Oka Y., Morimatsu A., Masumura T., Ohmura T., Tsuchiyama T.
Dependence of Carbon and Nitrogen Content on Grain Refinement Strengthening in Austenitic Stainless Steel
-
Patel D., Matsumoto A., Kumakura H., Hara Y., Hara T., Maeda M., Liang H., Yamauchi Y., Choi S., Kim J.H., Hossain M.S.A.
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
-
Shibata A., Gutierrez-Urrutia I., Nakamura A., Moronaga T., Okada K., Madi Y., Besson J., Hara T.
Local crack arrestability and deformation microstructure evolution of hydrogen-related fracture in martensitic steel
-
Shibata A., Madi Y., Besson J., Nakamura A., Moronaga T., Okada K., Gutierrez-Urrutia I., Hara T.
Relationship between Three-dimensional Crack Morphology and Macroscopic Mechanical Properties of Hydrogen-related Fracture in Martensitic Steel
-
Singh A., Somekawa H., Hiroto T., Ode M., Tesař K., Čech J., Hara T.
Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg–Zn–Al alloy: Microstructure and mechanical properties
2023
-
Battulga B., Shiizaki K., Miura Y., Osanai Y., Yamazaki R., Shinohara Y., Kubota Y., Hara T., Kuro-o M., Ohno N.
Correlative light and electron microscopic observation of calcium phosphate particles in a mouse kidney formed under a high-phosphate diet
-
Cui D., Sciazko A., Komatsu Y., Nakamura A., Hara T., Wu S., Xiao R., Shikazono N.
Three dimensional microstructures of carbon deposition on Ni-YSZ anodes under polarization
-
Hara T.
Techniques and Applications of FIB-SEM Serial Sectioning Observation [集束イオンビームを利用した SEM シリアルセクショニングの観察技法と応用]
-
Hashimoto M., Takahashi H., Tabata-Okubo K., Nagaoka N., Tokunaga K., Matsumori H., Ishihara Y., Kaku M., Iimura T., Hara T., Kamioka H.
Bundling of collagen fibrils influences osteocyte network formation during bone modeling
-
Inoue T., Hara Y., Nakazato K.
Mechanical Resistance of the Largest Denticle on the Movable Claw of the Mud Crab
-
Nishikawa H., Furuya Y., Osada T., Kawagishi K., Hara T.
Three-dimensional high-resolution crystallographic observation of the entire volume of microstructurally small fatigue cracks in Ni-Co based superalloy
-
Nishikawa H., Habib K., Furuya Y., Hara T., Osada T., Kawagishi K.
Short fatigue crack growth mechanism in Ni-Co based superalloy at elevated temperatures and in oxidative atmospheres
-
Okada K., Shibata A., Sasaki T., Matsumiya H., Hono K., Tsuji N.
Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels
-
Sciazko A., Komatsu Y., Nakamura A., Ouyang Z., Hara T., Shikazono N.
3D microstructures of solid oxide fuel cell Ni-YSZ anodes with carbon deposition
-
Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T., Tsuzaki K.
Substructure and crystallography of lath martensite in as-quenched interstitial-free steel and low-carbon steel
-
Shibata, A., Gutierrez-Urrutia, I., Nakamura, A., Okada, K., Miyamoto, G., Madi, Y., Besson, J., Hara, T., Tsuzaki, K.
Three-dimensional propagation behavior of hydrogen-related intergranular cracks in high-strength martensitic steel
-
Yagi Y., Konno R., Hayashi T., Tanaka K., Yamasaki N.Y., Mitsuda K., Sato R., Saito M., Homma T., Nishida Y., Mori S., Iyomoto N., Hara T.
Performance of TES X-Ray Microcalorimeters Designed for 14.4-keV Solar Axion Search