論文リスト

• 2026
• 2025
• 2024
• 2023

2026

• Guo S., Okuma G., Naito K., Kakisawa H.

  In situ zirconia-lanthanum magnesium aluminate composites: Preparation and mechanical behaviours

  Ceramics International. 52 [5] (2026) 6481-6492

  • 10.1016/j.ceramint.2025.12.401

• Gaqi Y., Guo S., Kusano M., Naito K., Watanabe M.

  Effects of heat-treatment temperature on the adhesive bonding performance of Ti–6Al–4V alloy

  Journal of Materials Research and Technology.40(2026)2491-2502

  • 10.1016/j.jmrt.2025.12.197

• Naito K., Nagai C., Shirasu K.

  Anisotropic elastic properties in glass, aramid, and carbon fibers

  Journal of Materials Research and Technology.41(2026)3101-3106

  • 10.1016/j.jmrt.2026.01.225

• Naito K., Nakamura Y., Ando S., Koyanagi J., Shirasu K., Watanabe M., Suzuki T., Kuwahara H.

  Mode-I and mode-II interlaminar fracture properties of high strength polyacrylonitrile-based carbon fiber reinforced disulfide-based epoxy-covalent adaptable network polymer composite

  Materials Today Communications.51(2026)114737

  • 10.1016/j.mtcomm.2026.114737

2025

• Guo S., Okuma G., Naito K., Kakisawa H.

  Microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics

  Ceramics International.51[3](2025)4058-4066

  • 10.1016/j.ceramint.2024.11.384

• Guo S., Okuma G., Naito K., Kakisawa H.

  Effect of thermal exposure at 1200 °C and 1400 °C on microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics

  Ceramics International.(2025)

  • 10.1016/j.ceramint.2025.04.307

• Guo S., Okuma G., Naito K., Kakisawa H.

  Volume fraction dependence of electrical conductivity in B4C-based composites with ZrB2-ZrC

  Materials Letters.397(2025)138820

  • 10.1016/j.matlet.2025.138820

• Hibi Y., Matsumoto T., Midorikawa M., Uesaka S., Mizoshiri M., Tanimura T., Okada M., Naito K., Naito M.

  Defining the degree of degradation in plastics: Quantification of accumulated degradation products and leached stabilizers for predicting end-of-life

  Polymer Degradation and Stability.232(2025)111128

  • 10.1016/j.polymdegradstab.2024.111128

• Kawasaki S., Naito K., Tanks J.

  Rapid thermal degradation of polyamide 6 microdroplets and its effect on interfacial shear strength to simulate thermal welding conditions of CFRTP

  Composites Science and Technology.270(2025)111318

  • 10.1016/j.compscitech.2025.111318

• Naito K., Nagai C.

  Raman Scattering for Anisotropy of Polyacrylonitrile-Based and Pitch-Based Carbon Fibers

  Fibers.13[9](2025)114

  • 10.3390/fib13090114

• Somekawa H., Ono Y., Naito K., Singh A.

  Enhancement of ductility in low temperature regimes via detwinning in Mg alloys

  Scripta Materialia.264(2025)116694

  • 10.1016/j.scriptamat.2025.116694

• Tamura K., Tanks J., Niizeki D., Watanabe Y., Kogure T., Sakuma H., Kamon M.

  Heavy metal ion adsorption mechanism of polysulfide-modified layered double hydroxide

  Applied Clay Science.269(2025)107759

  • 10.1016/j.clay.2025.107759

• Tanks J., Akagawa T., Tamura K., Nemoto Y., Naito K., Watanabe Y., Nge T.T., Yamada T.

  Enhancing the thermo-oxidative stability of polyamide 6 by scalable melt-blending with PEG-grafted glycol lignin

  Polymer.335(2025)128853

  • 10.1016/j.polymer.2025.128853

• Tanks J., Tamura K.

  Room-Temperature Material Recycling/Upcycling of Polyamide Waste Enabled by Cosolvent-Tunable Dissolution Kinetics

  Angewandte Chemie - International Edition.(2025)

  • 10.1002/anie.202502474

• Wang J., Lin H., Tanks J.D., Arao Y.

  Large-area high thermal conductivity graphite-carboxymethylcellulose film easily produced by mechanical exfoliation of natural graphite using a three-roll mill

  Composites Part C: Open Access.17(2025)100580

  • 10.1016/j.jcomc.2025.100580

2024

• Guo S., Okuma G., Naito K., Kakisawa H.

  Mechanical behaviours of hot-pressed rare-earth oxide (RE = Y and La)-doped TaB2-SiC composites

  Journal of the European Ceramic Society.44[3](2024)1445-1457

  • 10.1016/j.jeurceramsoc.2023.10.057

• Guo S., Okuma G., Naito K., Kakisawa H.

  Mechanical behaviours of reactive hot-pressed B4C-based composites with ZrB2-ZrC

  Journal of the European Ceramic Society.44[15](2024)116734

  • 10.1016/j.jeurceramsoc.2024.116734

• Kawasaki S., Naito K., Ishida O., Shirai T., Uzawa K.

  Infrared-thermography measurement of temperature distribution in carbon fiber–reinforced polypropylene during ultrasonic welding

  Composites Part A: Applied Science and Manufacturing.177(2024)107887

  • 10.1016/j.compositesa.2023.107887

• Morimoto T., Katoh H., Ishida Y., Hara E., Kusano M., Naito K., Watanabe M., Takagi K., Arai K., Hasegawa K.

  Modified double cantilever beam test method for mode-I energy release rate of elastic adhesive layers

  Engineering Fracture Mechanics.307(2024)110320

  • 10.1016/j.engfracmech.2024.110320

• Naito K., Nagai C.

  Raman Scattering for Tensile Testing of Polyacrylonitrile-Based and Pitch-Based Single Carbon Fibers

  Fibers.12[10](2024)88

  • 10.3390/fib12100088

• Naito K., Nagai C., Kawasaki S.

  Tensile Properties and Weibull Modulus of Polymeric-Fiber-Reinforced Epoxy-Impregnated Bundle Composites

  Journal of Composites Science.8[10](2024)390

  • 10.3390/jcs8100390

• Nakamura T., Sakai T., Shimamura Y., Oguma H.

  Guest editorial of virtual special issue: The eighth international conference on very high cycle fatigue (VHCF8), held online from July 5 to 9, 2021, and distributed from Sapporo, Japan

  Fatigue and Fracture of Engineering Materials and Structures.47[2](2024)257-260

  • 10.1111/ffe.14191

• Oguma H., Naito K.

  Effects of mean stress on the fatigue properties of core-in-sheath-type carbon/glass hybrid thermoplastic composite rods: Experimental investigation and practical predictive method

  Fatigue and Fracture of Engineering Materials and Structures.(2024)

  • 10.1111/ffe.14332

• Somekawa H., Tsuru T., Naito K., Singh A.

  Control of twin boundary mobility by solute segregation in Mg binary alloys

  Scripta Materialia.249(2024)116173

  • 10.1016/j.scriptamat.2024.116173

• Tanks J., Tamura K., Naito K., Nge T.T., Yamada T.

  Durable and recyclable biomimetic glycol lignin/polyolefin compounds for a circular economy

  Journal of Materials Chemistry A.12[5](2024)3014-3025

  • 10.1039/d3ta06230a

• Tobata Y., Naito K., Tanks J.

  Mode Ⅰ–Governed fracture energy and maximum normal traction of a CFRP rod

  Journal of Composite Materials.58[3](2024)317-326

  • 10.1177/00219983231224112

• Zhang C., Ai M., Wu M., Rong J., Naito K., Yu X., Zhang Q.

  Effect of curcumin-modified nanodiamonds on properties of eco-friendly polylactic acid composite films

  Colloids and Surfaces A: Physicochemical and Engineering Aspects.680(2024)132652

  • 10.1016/j.colsurfa.2023.132652

2023

• Guo S., Okuma G., Naito K., Kakisawa H.

  Mechanical behaviors of hot-pressed 4TaC–1ZrC ceramics with and without Y2O3 and La2O3 additives

  International Journal of Refractory Metals and Hard Materials.117(2023)106389

  • 10.1016/j.ijrmhm.2023.106389

• Guo, S., Okuma, G., Naito, K., Kakisawa, H.

  Mechanical properties of hot-pressed VB2–SiC composites with and without WC

  Ceramics International.49[22](2023)35368-35376

  • 10.1016/j.ceramint.2023.08.210

• Han W., Wu M., Rong J., Zhang S., Zhang X., Zhao T., Yu X., Naito K., Zhang Q.

  Effect of functionalized nanodiamond on properties of polylactic acid eco-friendly composite films

  Diamond and Related Materials.133(2023)109717

  • 10.1016/j.diamond.2023.109717

• Naito K., Nakamura M., Matsuoka T.

  Friction and wear properties of polyacrylonitrile- and pitch-based carbon fiber-reinforced polymer matrix composites containing silicon carbide nanoparticles

  Polymer Composites.44[4](2023)2405-2416

  • 10.1002/pc.27252

• Naito K.

  Effect of the number of filaments on the tensile properties of polyacrylonitrile- and pitch-based carbon fiber epoxy-impregnated bundle composites

  Results in Materials.19(2023)100424

  • 10.1016/j.rinma.2023.100424

• Naito K., Seki Y., Inoue R.

  Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies

  Journal of Composites Science.7[4](2023)146

  • 10.3390/jcs7040146

• Nakamura Y., Hibi Y., Naito K., Yamamoto N., Hanamura M.

  Chemical Structure Evaluations of Amine Hardeners to Ensure and Predict the Performance of Wet Adhesion of Epoxies

  Bulletin of the Chemical Society of Japan.96[12](2023)1339-1345

  • 10.1246/bcsj.20230218

• Ogawa Y., Naito K., Harada K., Oguma H.

  Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading

  Polymers.15[8](2023)1878

  • 10.3390/polym15081878

• Somekawa H., Naito K.

  Grain boundary plasticity at intermediate temperatures in fine-grained Mg-Mn ternary alloys

  Journal of Alloys and Compounds.942(2023)169012

  • 10.1016/j.jallcom.2023.169012

• Tanks J., Hiroi T., Tamura K., Naito K.

  Tethering Organic Disulfides to Layered Silicates: A Versatile Strategy for Photo-Controllable Dynamic Chemistry and Functionalization

  Bulletin of the Chemical Society of Japan.96[1](2023)65-71

  • 10.1246/bcsj.20220309

• Tanks J., Naito K., Tamura K.

  Rigid epoxy networks with very high intrinsic fracture toughness using a piperazine-based in-situ polymerization strategy

  Materials Letters.335(2023)133821

  • 10.1016/j.matlet.2023.133821

• Tanks J., Tamura K., Naito K., Nge T.T., Yamada T.

  Glycol lignin/MAH-g-PP blends and composites with exceptional mechanical properties for automotive applications

  Composites Science and Technology.238(2023)110030

  • 10.1016/j.compscitech.2023.110030

• Tobata Y., Naito K., Tanks J.

  Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test

  Polymer Composites.44[2](2023)954-962

  • 10.1002/pc.27145

• Xue G., Nakamura T., Fujimura N., Takahashi K., Oguma H., Takeuchi A., Uesugi M., Uesugi K.

  Full-life growth behavior of a naturally initiated internal fatigue crack in beta titanium alloy via in situ synchrotron radiation multiscale tomography

  International Journal of Fatigue.170(2023)107571

  • 10.1016/j.ijfatigue.2023.107571

• Yoshinaka F., Nakamura T., Oguma H., Fujimura N., Takeuchi A., Uesugi M., Uesugi K.

  Characterization of internal fatigue crack initiation in Ti-6Al-4V alloy via synchrotron radiation X-ray computed tomography

  Fatigue and Fracture of Engineering Materials and Structures.(2023)

  • 10.1111/ffe.13957

• Zhang S., Wu M., Rong J., Zhang X., Han W., Zhao T., Chen X., Naito K., Yu X., Zhang Q.

  Synthesis and Characterization of Pyrimidine-Based Novel Phthalonitrile Resins with Excellent Processing Performance and High Glass Transition Temperature

  ChemistrySelect.8[13](2023)e202204876

  • 10.1002/slct.202204876