Poster Session
Poster Session will be held with the following schedule.
Please stand with your poster during the following core time and feel free to view the posters
during the other breaks.
Core Time: Nov. 7 (Tue) 17:00 ~ 19:00
Place: Conference Room 303/304
Presentation Category:
- Process
- Characterization
- Evaluation
- Modeling
Important Notice:
- Please see Poster Presentation List and check your Poster Presentation Number from the list below. Download [PDF : 459KB]
- Poster panel will be allocated to each poster presentation.
- Please find your number and put your poster on the panel before the session.
- Pushpins will be provided to each presenter on site.
- Posters must be written in English.
- Size of each panel is 90cm (width) x 210cm (height).
- Poster can be posted from 9:30 in the morning of Monday, November 6 and must be removed by 19:15 on Tuesday, November 7 after the core time.
- All presenters must register for NIMS Award Symposium 2023 at the following official
website.
If you have not done yet, please register from the following site. - If you are a NIMS member, please bring your NIMS ID card with you on the day.
Poster Presentation List
1. Process
| No. | Name | Affiliation/Company | Presentation Title |
|---|---|---|---|
| P1-01 | Yoshiaki Toda | NIMS | New Microstructure Design of Heat-resistant Titanium Alloys with Property Improvements Using Super Thermal Field |
| P1-02 | Satoshi Emura | NIMS | Introduction of Millefeuille-like α/β Layered Structure into Ti-Mo Alloy through Thermomechanical Treatment |
| P1-03 | Phuangphaga Daram | NIMS | Compositionally Graded Titanium to Aluminum Processed by Laser Powder Bed Fusion Process: Microstructure Evolution and Mechanical Properties |
| P1-04 | Sachiko Hiromoto | NIMS | Development of Apatite and LDH Coatings of Mg Alloys Depending on the Application |
| P1-05 | Yusuke Tsutsumi | NIMS | Improvement of Corrosion Resistance of Type 420J2 Martensitic Stainless Steel by Laser thermal Processing |
| P1-06 | Akitsu Shigetou | NIMS | Low-Temperature and Non-vacuum Surface Modification for Anti-Hydrolysis Hybrid Bonding |
| P1-07 | Machiko Ode | NIMS | Observation and Numerical Prediction of Concentration Distribution at Cast Coating Interface of Solid Pt, Ir, Re Using Liquid Ni-Based Alloys |
| P1-08 | Yuuji Kimura | NIMS | Delayed Fracture of Ultra-high Strength Steel Processed by Warm Tempforming |
| P1-09 | Susumu Takamori | NIMS | Microstructures and Mechanical Properties of Fe–15Mn–10Cr–8Ni–4Si Seismic Damper Cast Alloy |
| P1-10 | Hiroshi Honda | NIMS | Evaluation of Laser Absorptivity of Titanium Powder by Using Ray Tracing |
| P1-11 | Takuma Saito | NIMS | Effect of Cooling Rate From Sub-Solvus Solution Treatment Temperature on Hardness in Powder Metallurgy Ni-Co-base Superalloy |
| P1-12 | Masahiro Kusano | NIMS | Three-Dimensional Cellular Automaton for Grain Growth of Inconel 738LC in Laser Powder Bed Fusion |
| P1-13 | Tomonori Kitashima | NIMS | Fabrication of Single Crystals in Laser Powder Bed Fusion Using a Flat-Top Laser |
| P1-14 | Makoto Watanabe | NIMS | Materials Integration for Laser Powder Bed Fusion Process |
| P1-15 | Rintaro Ueji | NIMS | Anisotropy of Uniaxial Yield Stress of Pearlitic Steel Caused by Compressive Deformation |
| P1-16 | Ryuta Yurishima | University of Ibaraki | High-throughput Search for High-performance Materials Using Composition-graded Bulk Specimens |
| P1-17 | Naoe Hosoda | NIMS | Biomimetic Reversible Interconnection |
2. Characterization
| No. | Name | Affiliation/Company | Presentation Title |
|---|---|---|---|
| P2-01 | Takahito Ohmura | NIMS | Nano-mechanical Characterization for Multi-scale Modeling in Mechanical Behavior of Metallic Materials |
| P2-02 | Tomotaka Hatakeyama | NIMS | Microstructure of Modified 9Cr-1Mo Steel Manufactured by Laser Powder Bed Fusion |
| P2-03 | Fumiyoshi Yoshinaka | NIMS | Hierarchical Fatigue Damage Mechanism and Development of Fatigue-resistant Alloy |
| P2-04 | Mainak Saha | Indian Institute of Technology Madras | On the Three-dimensional Atomic Scale Characterisation of Nano-Scale B2 Phase in Ni-Alloyed Fe-Mn-Al-C Low-density Steel |
| P2-05 | Hidetoshi Somekawa | NIMS | Effect of Grain Boundary Segregation On Mechanical Properties in Mg Alloys |
| P2-06 | Viola Paul | NIMS | Effect of Yttrium Addition on the Nanoindentation Behavior at Mg–Y Alloy Grain Boundaries |
| P2-07 | Tomoya Nagira | NIMS | Application of Friction Stir Welding for Fe-Mn-Si Alloy |
| P2-08 | Silvia Pomes | NIMS | Elevated Temperature Exploration of Mechanical Behavior in Zr-based Bulk Metallic Glass through Nanoindentation Testing |
| P2-09 | Susumu Meguro | NIMS | Thermoelectric Generation by Joining Interface Control of thermocouple Metals |
| P2-10 | Digvijay Singh | NIMS | Unveiling the Transformation Pathways of Hierarchical γ90 – εtwin – α’ Triple Phase Structure Formation at ε-ε Martensite Intersection |
| P2-11 | Norimitsu Koga | Kanazawa University | Tensile Properties and Deformation Behavior at Low Temperatures in Ferrite and Austenite Duplex Stainless Steel With Various Grain Sizes |
| P2-12 | Wenqi Mao | Japan Atomic Energy Agency | Excellent Combination of Strength and Ductility of an Ultrafine-grained Stainless Steel at Cryogenic Temperatures Studied by in Situ Neutron Diffraction |
| P2-13 | Seiichiro Ii | NIMS | Static and Dynamic Characterization of Grain Boundary-dislocation Interaction |
| P2-14 | Wu Gong | Japan Atomic Energy Agency | Microstructure Characterization through in Situ Neutron Diffraction with Diffractometer TAKUMI |
| P2-15 | Kazuho Okada | NIMS | Improvement of Resistance Against Hydrogen Embrittlement by Carbon Segregation at Prior Austenite Grain Boundary in As-Quenched Martensitic Steels |
| P2-16 | Ivan Gutierrez | NIMS | Development of Analysis Methods for SEM-based Techniques and X-Ray Contrast Tomography: Application to Strain Localization Phenomena and Hydrogen-induced Effects on Plasticity in High-strength Steels |
| P2-17 | Tatsuya Ito | Japan Atomic Energy Agency | In Situ Neutron Diffraction Study on Deformation Behavior of Hydrogen-charged SUS310S Austenitic Steel |
| P2-18 | Toru Hara | NIMS | Advanced FIB-SEM Serial-sectioning Techniques Dedicated for 3D-EBSD Analysis |
| P2-19 | Jiangwei Liu | NIMS | High Thermal Stability for Boron-Doped Diamond Field-effect Transistors |
| P2-20 | Ryunosuke Harada | University of Hyogo | Effects of Temperature and Strain Rate on Mechanical Properties in FeMnNiCoCr High Entropy Alloy |
| P2-21 | Sangmin Lee | NIMS | Deformation Behavior and Microstructure of Dual-phase CoCuNi Alloy Processed by High-pressure Torsion and Subsequent Annealing |
| P2-22 | Kaito Kikuchi | Nagaoka University of Technology | Development of a New Age-hardenable Magnesium Alloy Sheet with Excellent Room Temperature Formability and Corrosion-resistance |
| P2-23 | Hideaki Nishikawa | NIMS | Short Fatigue Crack Growth Mechanism in Ni-Co Based Superalloy at Elevated Temperatures and in Oxidative Atmospheres |
| P2-24 | Dayuan Liu | NIMS | Estimation of Mechanical Properties of Alloys Using Neighboring Indentation Test |
| P2-25 | Takahiro Sawaguchi | NIMS | Evidence Supporting Reversible Martensitic Transformation under Cyclic Loading on Fe–Mn–Si–Al Alloys Using in Situ Neutron Diffraction |
| P2-26 | Seunghyeon Kim | NIMS | Corrosion Behavior of Gd2Si2O7/ Sc2Si2O7 with CMAS Melts for Environmental Barrier Coatings |
| P2-27 | Nozomu Adachi | Toyohashi University of Technology | Mechanical Response of Pure Fe Having Different Grain Sizes under Tensile Stress |
| P2-28 | Kyoko Kawagishi | NIMS | Construction of a Materials Database for Aeroengine Materials |
3. Evaluation
| No. | Name | Affiliation/Company | Presentation Title |
|---|---|---|---|
| P3-01 | Kimiyoshi Naito | NIMS | Anisotropic Properties of Polyacrylonitrile- and Pitch-based Carbon Fibers |
| P3-02 | Sheng Xu | Tohoku Univeristy | Examining the Cryogenic Elastocaloric Effect in A Cu-Al-Mn Alloy |
| P3-03 | Kota Sawada | NIMS | Effect of Segregation of Alloying Elements on Creep Strength in Heat Resistant Steels |
| P3-04 | Ayako Ikeda | NIMS | High-throughput Evaluation Methods for Ni Based Superalloys Using Composition and Process Temperature Graded Bulk Samples |
| P3-05 | Hideki Katayama | NIMS | Development of Prediction Technology for Corrosion Damage Risk of Infrastructures |
| P3-06 | Jonathon Tanks | NIMS | Durable Biomass/Polypropylene Composites for Improving Sustainability in Structures |
| P3-07 | Kentaro Wada | NIMS | Gaseous Hydrogen Embrittlement of Pure Nickel and Copper Nickel Alloys |
| P3-08 | Satoshi Morooka | Japan Atomic Energy Agency | Magnetic Order and Phase Transformation in Fe-Mn-C Alloy at Cryogenic Temperature |
| P3-09 | Elango Chandiran | NIMS | Activation of Non <a> Type Dislocations and Damping Capacity Improvement by Deformation Induced Martensitic Transformation in Mg-Sc Alloy |
| P3-10 | Rion Abe | Iwate University | 3D Visualization of Hydrogen Trapping Sites in Al-Zn-Mg Alloys |
| P3-11 | Christopher Mercer | NIMS | Evaluation of the Mechanical Response of Functional Lattice Structures |
| P3-12 | Chihiro Tabata | Waseda University | Measurements of Interfacial Strength between Sulfur-segregated Al2O3 and Ni-Al Single Crystal Alloy Using Nanoindentation |
| P3-13 | Hiroyuki Oguma | NIMS | Elucidation of Fatigue Fracture Mechanism Focusing on the Environment and Interface in Materials |
| P3-14 | Yuhei Ogawa | NIMS | Beneficial Aspect of Hydrogen on the Mechanical Property of Fe-Cr-Ni Austenitic Steels |
| P3-15 | Kensuke Miyahara | NIMS | Small Ball Rebound Hardness Tester and Progress for Japanese Industrial Standards (JIS) |
| P3-16 | Houichi Kitano | NIMS | Advancement of Welding Technology through the Use of AI Technology |
| P3-17 | Masao Hayakawa | NIMS | Review of Damage Evaluation and Remanufacturing for Material Sustainability |
| P3-18 | Yoshinori Ono | NIMS | Developing a Foundation for Material Evaluations to Support R & D on Liquefied Hydrogen-related Equipment |
| P3-19 | Yoshiharu Murase | NIMS | Corrosion Resistance Evaluation of Structural Materials by Multimodal KFM-EBSD-EDS Analysis |
| P3-20 | Kazuya Shimoda | NIMS | High Temperature Fatigue Properties of SiC/SiC Composites via Novel Production Route Using Sandwich Prepreg Sheets |
| P3-21 | Kotaro Doi | NIMS | Electrochemical Measurement of Hydrogen Diffusion Coefficient for Mg-based Materials |
4. Modeling
| No. | Name | Affiliation/Company | Presentation Title |
|---|---|---|---|
| P4-01 | Taichi Abe | NIMS | Computational Phase Diagrams and their Database Based on CALPHAD |
| P4-02 | Taiyo Maeda | Yokohama Natonal University | Numerical Prediction of Strength Scatter in Ceramics Based on Microstructural Information |
| P4-03 | Mariko Kadowaki | NIMS | Numerical Simulations to Analyze the Corrosion Behavior of Metallic Materials |
| P4-04 | Ikuo Ohnuma | NIMS | Segregation Engineering of Structural Materials by CALPHAD Method |
| P4-05 | Arkapol Saengdeejing | NIMS | Developing Thermodynamic Database from First-principles Calculations Data |
| P4-06 | Mostafizur Rahman | Yokohama National University | Kinetic Parameters for Strength Recovery in Self-healing Ceramics |
| P4-07 | Dmitry S. Bulgarevich | NIMS | Representative Volume Element Reconstruction and Crystal Plasticity Modeling of Stress-strain Curves for Additively Manufactured Hastelloy X |
| P4-08 | Ryoji Sahara | NIMS | Design of High Temperature Materials Using a Multiscale Simulation Without Empirical Parameter |
| P4-09 | Xiaoyang Zheng | NIMS | Reprogrammable Mechanical Metamaterials |
| P4-10 | Aaditya Manjanath | NIMS | Probing Chemical Reaction Dynamics through Excited-state Time-dependent GW Simulations |
| P4-11 | Jiaxin Zhou | NIMS | Computational Morphology Design of Duplex Structure Considering Interface Debonding |
| P4-12 | Masato Wakeda | NIMS | Atomistic Modeling of Nanoscale Interaction between Dislocation and Grain Boundary in BCC and FCC Metals |
| P4-13 | Sukeharu Nomoto | NIMS | Seamless Numerical Simulation for Laser Powder Bed Fusion Process by Lattice Boltzmann and Multi-phase Field Methods |
| P4-14 | Junping Du | Osaka University | A Neural Network Accelerated Kinetic Monte Carlo Simulation of the Evolution of Chemical Order in CrCoNi Medium-entropy Alloy |
| P4-15 | Vickey Nandal | NIMS | Artificial Intelligence and Expert Cooperative Design of Non-isothermal Aging Heat Treatment Schedules for Improving 0.2% Proof Stress in γ – γ' Binary Ni-Al Alloys |
| P4-16 | Shihao Zhang | Osaka University | Highlier Efficient Neural Network Interatomic Potential of α-iron and Hydrogen System |
| P4-17 | Hitoshi Izuno | NIMS | Tandem Bayesian Model: Connection of Weld Joint Creep Performance and Welding Conditions Considering HAZ Shape Factor |
| P4-18 | Shinnosuke Yanagawa | NIMS | Multiscale Finite Element Analysis of Yield Point Phenomenon In Ferrite-pearlite Duplex Steels |
| P4-19 | Keiya Sugiura | Nagoya University | 3D Microstructure Reconstruction of Metallic Materials Using Generative Adversarial Networks |