Publication 2004

Home > Publication Archive > Publication 2004
Facebook
National Institute for Material Science

Publication 2004

The articles written in black are original papers, those indicated in grey are conference proceedings.The articles written in green are review papers or book chapters.

Metallic Nanostructure Group

  1. Focused ion beam fabrication of field ion microscope specimens from mechanically milled pearlitic steel powder
    S. Ohsaki, K. Hono, H. Hidaka, and S. Takaki, J. Electron Microscopy 53, 523-525 (2004).

  2. Study on the sub-Tg and Tg mechanical relaxations of a Zr36Ti24Be40 amorphous alloy by time-temperature superposition principle
    H. T. Jeong, E. Fleury, W. T. Kim, D. H. Kim and K. Hono, J. Phys. Soc. Jpn 73, 3192-3197 (2004).

  3. Nanocrystallization of Zr41.2Ti13.8Cu12.5Ni10.0Be22.5 metallic glass
    I. Martin, T. Ohkubo, M. Ohnuma, B. Deconihout, and K. Hono, Acta Mater. 52, 4427-4435 (2004).

  4. Assembly of FePt L10 nanoparticles grown on MgO (110) with self-organized groove structure
    S. Okamoto, O. Kitakami, T. Miyazaki, Y. Shimada, Y. K. Takahashi, and K. Hono, J. Appl. Phys. 96, 5217-5221 (2004).

  5. Selective electrochemical dissolution in two phase La-Zr-Al-Cu-Ni metallic glass
    A. Gebert, A. A. Kundig, L. Schultz, and K. Hono, Scr. Mater. 51, 961 - 965 (2004).

  6. Microstructural evolution and its dependence on magnetic properties in melt-spun Sm-Co-Cu-B and Sm-Co-Fe-Cu-B ribbons
    R. Gopalan, D. H. Ping, and K. Hono, J. Mag. Mag. Mater. 284, 321 - 329 (2004).

  7. Rapidly solidified (FePt)70P30 alloy with high coercivity
    A. A. Kundig, N. Abe, M. Ohnuma, T. Ohkubo, H. Mamiya, and K. Hono, Appl. Phys. Lett. 85, 789 - 791(2004).

  8. TEM/3DAP observation of nanocrystalline ferrite produced by mechanically milling pearlite steel powder
    S. Ohsaki, K. Hono, H. Hidaka and S.Takaki, Proceedings of the Second International Conference on Advanced Structural Steels (ICASS 2004), April 14 - 16 (2004), Shanghai, China, pp. 685 - 688.

  9. Precipitates in 13Cr-8Ni-2.5Mo Maraging Steel
    D. H. Ping, M Ohnuma, K. Hono, Y. Hirakawa, Y. Kadoya, Proceedings of the Second International Conference on Advanced Structural Steels (ICASS 2004), April 14 - 16 (2004), Shanghai, China, pp. 582 - 588.

  10. Effect of reversion on the bake hardening response of Al-Mg-Si(-Cu) alloy
    T.Honma, K.Matsumoto, Y.Nagai, M.Hasegawa, and K.Hono, Proc. the 9th InternationalConference on Aluminum Alloys 2004, August 2-5, 2004, Brisbane Australia, edited by J. F. Nie, A. J. Morton, and B. C. Muddle, Institute of Materials Engineering Australia Ltd., pp. 494 - 498.

  11. Coincidence Doppler broadening and 3DAP study of the pre-precipitation stage of Al(-Li)-Cu-Mg(-Ag) alloys
    Y. Nagai, K. Hono, S. Yanagita, T. Honma and M. Hasegawa, Proc. the 9th International Conference on Aluminum Alloys 2004, August 2-5, 2004, Brisbane Australia, edited by J. F. Nie, A. J. Morton, and B. C. Muddle, Institute of Materials Engineering Australia Ltd., pp. 287 - 292.

  12. The effect of Cu on precipitation in Al-Zn-Mg alloys
    Zs. Kovacs, N. Q. Chinh, K. Suvegh, T. Marek, Gy. Horvath, J. Lendvai, D. H. Ping, and K. Hono, Proc. the 9th International Conference on Aluminum Alloys 2004, August 2-5, 2004, Brisbane Australia, edited by J. F. Nie, A. J. Morton, and B. C. Muddle, Institute of Materials Engineering Australia Ltd., pp. 1192 - 1197.

  13. Huge coercivity exceeding 100 kOe in epitaxially grown FePt sputtered films
    T. Shima, K. Takanashi, Y. K. Takahashi, K. Hono, Appl. Phys. Lett. 85, 2571 - 2573 (2004).

  14. Influence of the buffer layers on magnetic properties of FePt (001) films sputter-deposited at reduced temperature
    T. Seki, T. Shima, K. Takanashi, Y. Takahashi, and E. Matsubara, Y. K. Takahashi and K. Hono, J. Appl. Phys. 96, 1127 - 1132 (2004).

  15. Microstructure and magnetic properties of FePt and Fe/FePt polycrystalline films with high coercivity
    Y. K. Takahashi, T. O. Seki, K. Hono, T. Shima, and K. Takanashi, J. Appl. Phys. 96, 475 (2004).

  16. Factors controlling irradiation hardening of iron-copper model alloy
    T. Kudo, R. Kasada, A. Kimura, K. Hono, K. Fukuya, H. Matsui, Mater. Trans. 45, 338 - 341(2004).

  17. Spin-dependent single-electron-tunneling effects in epitaxial Fe nanoparticles
    F. Ernult, K. Yamane, S. Mitani, K. Yakushiji, K. Takanashi, Y. K. Takahashi, and K. Hono, Appl. Phys. Lett. 84, 3106 - 3108 (2004).

  18. In-situ formed two-phase metallic glass with surface fractal microstructure
    A. A. Kundig, M. Ohnuma, D. H. Ping, T. Ohkubo, and K. Hono, Acta Mater. 52, 2441-2448 (2004).

  19. Microstructure evolution upon devitrification and crystallization kinetics of Zr57Ti8Nb2.5Cu13.9Ni11.1Al7.5 melt-spun glassy ribbons
    S. Scudino, D. Nagahama, J. Eckert, U. Kuhn, K. Hono and L. Schultz, J. Appl. Phys. 95, 3397 - 3403 (2004).

  20. Coincidence Doppler broadening and 3DAP study of the pre-precipitation stage of an　Al-Li-Cu-Mg-Ag alloy
    T. Honma, S. Yanagita, K. Hono, Y. Nagai and M. Hasegawa, Acta Mater. 52,1997-2003(2004).

  21. Microstructure and magnetic properties of melt-spun Sm(Co0.58Fe0.31Cu0.04Zr0.05B0.02)z alloys
    R. Gopalan, D. H. Ping, K. Hono, M. Q. Huang, B. R. Smith, Z. Chen, and B. M. Ma, J. Appl. Phys. 95, 4962 - 4967 (2004).

  22. Optimum compositions for the low temperature fabrication of highly ordered FePt (001) and FePt (110) films
    T. Seki, T. Shima, K. Takanashi, Y. Takahashi, E. Matsubara, and K. Hono, IEEE Trans Mag. 40, 2522-2524 (2004).

  23. Microstructure characterization of a-Fe/Sm-Fe-N nanocomposite hard magnetic materials
    D. H. Ping, K. Hono, T. Hidaka, T. Yamamoto, and A. Fukuno, J. Mag. Mag. Mater. 277/3, 337-343 (2004).

  24. Irradiation-induced defects and Cu precipitates in ternary Fe-based model alloys for nuclear reactor pressure vessel steels studied by positron annihilation and 3D atom probe
    Y. Nagai, T. Toyama, Z. Tang, M. Hasegawa, S. Yanagita, T. Ohkubo, and K. Hono, Mater. Sci. Forum, 445-446, 11 - 15 (2004).

  25. Embedded ultrafine clusters investigated by coincidence doppler broadening spectroscopy
    T. Toyama, Y. Nagai, Z. Tang, M. Hasegawa, T. Ohkubo, and K. Hono, Mater. Sci. Forum, 445-446, 195 - 197 (2004).

  26. The effect of Cu on mechanical and precipitation properties of Al-Zn-Mg alloys
    N. Q. Chinh, J. Lendvai, D. H. Ping and K. Hono, J. Alloy. Compound 378, 52 - 60 (2004).

  27. Interfacial disorder in the FePt particles capped with amorphous Al2O3
    Y. K. Takahashi and K. Hono, Appl. Phys. Lett. 84, 383 - 385 (2004).

  28. Size dependence of ordering in FePt nanoparticles
    Y. K. Takahashi, T. Koyama, M. Ohnuma, T. Ohkubo, and K. Hono, J. Appl. Phys. 95, 2690 - 2696 (2004).

  29. Fabrication of L10 ordered FePt thin films with a canted easy magnetization axis on MgO (110) substrate
    T. Shima, T. Sekia, K. Takanashia, Y. K. Takahashi, and K. Hono, J. Mag. Mag. Mater. submitted.

  30. On the criteria for the formation of nanoquasicrystalline phase
    B. S. Murty and K. Hono, Appl. Phys. Lett. 84, 1674 - 1676 (2004).

  31. Magnetic properties of nanocrystalline Fe-Co-Cu-M-Si-B alloys (M: Nb, Zr)
    Y. Yoshizawa, S. Fujii, D. H. Ping, M. Ohnuma, and K. Hono, Mater. Sci. Eng. A 375/377, 207 - 212 (2004).

  32. APFIM/TEM/SAXS studies of early stage crystallization of a Zr52.5Cu17.9Ni14.6Al10Ti5 metallic glass
    K. Kajiwara, M. Ohnuma, T. Ohkubo, D. H. Ping, K. Hono, Mater. Sci. Eng. A 375/377, 738 - 743 (2004).

  33. Effects of Zr and C addition in melt-spun Nd-Fe-B permanent magnets
    H. Hashino, Y. Tazaki, H. Ino, T. Ohkubo, and K. Hono, J. Mag. Mag. Mater. 278, 68-75 (2004).

  34. Atom probe study of the microstructure and the coercivity of sintered Sm(Co,Fe,Cu,Zr)7.5permanent magnet
    X. Y. Xiong, T. Ohkubo, K. Ohashi, Y. Tawara, and K. Hono, Acta Mater. 52, 737-748 (2004).

  35. Atom probe characterization of microstructures of nanocrystalline and nanocomposite magnetic materials
    K. Hono, a book chapter in "Handbook of Advanced Magnetic Materials: Vol. 3 Characterization and simulation",Kluwer Academic Publishers, Boston, ISBN 1-4020-7983-4, October 2004.
Page top