Supicha Trakuldit, Sachiko Hiromoto, Nattamon Suwannaharn, Kotaro Doi
Enhanced corrosion resistance of AA6061 aluminum alloy via electrodeposition of Mg-Al layered double hydroxide coatings
研究Research
論文 2025
-
-
Gong W., Harjo S., Kawasaki T., Yamashita T., Shibata A., Shinozaki T., Tomota Y., Tsuji N.
Effect of ausforming on isothermal transformation below the martensite start temperature in NiCrMoV steel: an in-situ neutron diffraction study
-
Katagiri J., Kusano M., Watanabe M.
Bayesian Optimization-Based Parameter Identification for Discrete Element Method Simulation of Consolidation and Its Application to Powder Spreading Analysis
-
Pham A.H., Takemoto M., Kodera K., Utada S., Tang Y.T., Wakabayashi H., Morito S., McCartney D.G., Rae C.M., Reed R.C.
Uncovering the Mechanism of Recrystallization in a Single-Crystal Superalloy: The Role of Porosity and Localized Strain in Nucleation
-
Akada T., Ueji R., Tokuzumi T., Mitsuhara M., Yamasaki S., Tanaka M.
Thermal stability of internal stress in drawn pearlitic steel
-
Byloff J., Trost C.O.W., Devulapalli V., Altaf Husain S., Faurie D., Renault P.-O., Edwards T.E.J., Cordill M.J., Casari D., Putz B.
Atomic Layer-Deposited Interlayers for Robust Metal–Polymer Interfaces
-
Gholizadeh R., T. Sasaki T., Chong Y., Yoshida S., Kurokawa S., Tsuji N.
Role of lattice defects in early-stage decomposition of CoCrFeMnNi high-entropy alloy: Mechanisms, kinetics, and transformation pathways
-
Makino F., Hirai T., Shiga T., Suto H., Fujihisa H., Oyanagi K., Kobayashi S., Sasaki T., Yagi T., Uchida K.-I., Sakuraba Y.
Magnetothermal resistance effect in a Co50Fe50/Cu multilayer studied via analysis of electron and lattice thermal conductivities
-
Galiègue L., Briffod F., Ito K., Masuo H., Watanabe M., Shiraiwa T., Enoki M.
Acoustic emission monitoring reveals keyhole formation and evolution
-
Ishihara K., Ichinokura S., Eremeev S.V., Sasaki T.T., Takada R., Nishimichi H., Akiyama R., Chulkov E.V., Hirahara T.
Manipulation of the anomalous Hall effect in magnetic topological insulator heterostructure MnBi2Te4/Bi2Te3 by Si substrate surface engineering
-
Briffod F., Daram P., Kusano M., Watanabe M.
An integrated computational materials engineering framework for process–structure–property mapping in laser powder bed fusion
-
Ohno K., Sahara R.
Analysis of Silicon Steel by Ab Initio and Phase Field Calculation
-
Nagira T., Nakamura T., Sawaguchi T., Mori M., Morisada Y., Fujii H.
Friction Stir Welding of Fe–15Mn–10Cr–8Ni–4Si Seismic Damping Alloy
-
Shi C., Liu Y., Urata K., Yasui S., Abe T., Kobayashi Y.
Thermodynamic Investigation of MnAl2O4 Spinel Precipitation Behavior in Manganese Containing-Slag Systems
-
Morishita M., Tadano T., Matsuoka Y., Abe T.
Mechanism of Solid Ammonia Stabilization at Ambient Temperature: Insights from Thermodynamics, Phonon Calculation, and Micromechanics
-
Yamashita T., Nagira T., Gong W., Kawasaki T., Harjo S., Ushioda K., Fujii H.
Evaluation of Residual Stress Distribution in Linear Friction Welded Steel Joint via Neutron Diffraction Mapping Measurement
-
Pomes S., Suzuki T., Enokizono T., Adachi N., Wakeda M., Ohmura T.
Metallic glasses heterogeneous and time sensitive small-scale plasticity probed through nanoindentation and machine learning clustering
-
Byloff J., Devulapalli V., Casari D., Edwards T.E.J., Trost C.O.W., Cordill M.J., Altaf Husain S., Renault P.-O., Faurie D., Putz B.
From Mechanics to Electronics: Influence of ALD Interlayers on the Multiaxial Electro-Mechanical Behavior of Metal–Oxide Bilayers
-
Park M.-H., Tagusari Y., Shibata A., Tsuji N.
Grain size effects on strain localization and fracture behavior in ferrite–martensite dual-phase steels characterized by digital image correlation analysis
-
Somekawa H., Singh A.
Mechanical response and microstructural evolution in tension of twin-induced Mg alloy
-
Matsuoka Y., Ode M., Abe T., Koyama T., Takahashi Y.K.
Phase-field study of microstructure formation of FePt-C nanogranular film for heat-assisted magnetic recording media
-
Meguro S., Takagiwa Y., Kimura T., Hiroto T., Nakamura T.
Elemental distribution at diffusion bonding interface of FeAlSi thermoelectric material and Cu
-
Chame P.V., Ueda K., Narushima T., Sahara R., Ghosh P.
Water Dissociation on α-Titanium(0001): Insights into the Role of Water Vapor on Early Stages of High-Temperature Oxidation of Titanium
-
Hiraoka K., Okuma G., Takeuchi A., Uesugi M., Sada Y., Katsumata K.-I., Yasumori A., Maeda K.
Effect of cristobalite on the response to indentation in potassium-fluorrichterite glass-ceramics
-
Nakatani T., Suwannaharn N., Sasaki T.T.
Fabrication and characterization of single-crystalline CoSn (101¯0) kagome metal thin films for interconnect applications: Structure and anisotropic electrical resistivity
-
Geshi Y., Hirayama T., Somekawa H., Matsuoka T.
Effect of polymer dispersion on mechanical properties for extruded Mg matrix composites
-
Naito K., Nagai C.
Raman Scattering for Anisotropy of Polyacrylonitrile-Based and Pitch-Based Carbon Fibers
-
Gutierrez-Urrutia I., Ogawa Y., Shibata A.
Analysis of the influence of hydrogen on prismatic loops and dislocation dipole structure in an austenitic steel: Effect on stacking fault energy
-
Hiyama K., Nakajima T., Sahara R., Ueda K., Narushima T.
Effect of Ni and Fe content on the plastic deformation behavior of Co–Cr–Fe–Ni–Mo alloys: A combined computational and experimental study
-
Sahay R., Radchenko I., Ananthasubramanian P., Harito C., Briffod F., Yasuda K., Shiraiwa T., Jhon M., Speaks R., Speaks D., Lee K., Enoki M., Raghavan N., Budiman A.S.
Interface Rotation in Accumulative Rolling Bonding (ARB) Cu/Nb Nanolaminates Under Constrained and Unconstrained Loading Conditions as Revealed by In Situ Micromechanical Testing
-
Ogawa Y., Takakuwa O., Moriyama J., Nishida H., Tsuzaki K., Shibata A.
Phenomenology and Mechanisms of Hydrogen-Induced Solid Solution-Hardening in Fe-Cr-Ni Austenitic Steels
-
Yoshida S., Park N., Shiotani K., Bai Y., Niiyama T., Shibata A., Shimokawa T., Tsuji N.
Ultra-grain-refinement of face-centered cubic high/medium-entropy alloys: Approaching the limit of grain refinement through severe plastic deformation and recrystallization
-
Hsu W.-C., Saito T., Saha M., Murakami H., Sasaki T., Yeh A.-C.
On the Solidification and Phase Stability of Re-Bearing High-Entropy Superalloys with Hierarchical Microstructures
-
Liu H., Kitamura M., Briffod F., Shiraiwa T.
A cellular automata-based crystal plasticity analysis of slip activity in additive manufactured Ti-6Al-4V during dwell fatigue
-
Machida S., Nagano Y., Okuma G.
Superheated steam-induced surface-accelerated amorphous-to-crystalline transition in an aluminosilicate inorganic polymer
-
Tomota Y., Li H., Tsuchida N., Gong W., Harjo S., Ohmura T.
Grain size dependence of
intergranular lattice strain generated by plastic deformation in ferritic steel -
Inoue T., Yoshihama T.
Exoskeletons of mud crabs, Scylla serrata, of different sizes: Body weight, surface morphology, internal tissue structure, and mechanical resistance
-
Zhou Y., Víllora E.G., Sahara R., Saengdeejing A., Shimamura K.
Crystallographic and Electronic Structures of Nb:YTaO4and Tb:YTaO4Single-Crystal Scintillators
-
Hu H., Briffod F., Shiraiwa T., Enoki M.
Novel Bayesian Statistical Analysis on Acoustic Emission Data during Dwell-fatigue of Ti-6Al-4V Alloys
-
Kadowaki M., Moronaga T., Nakamura A., Murase Y., Hashimoto T., Katayama H., Takanabe K., Tsutsumi Y.
Corrosion Inhibition of Nickel Achieved by Phosphate Addition into Chloride-Rich Media toward Seawater Electrolysis
-
He D.
Review of Corrosion Evaluation Methods for Steel Reinforcement in Concrete
-
Nishio R., Umetani T., Nakamura Y., Sasaki T.T., Shibata A.
Effect of cooling rate after high-temperature heating on the ductility of 19Cr-0.020C-0.015N-0.4Nb stabilized ferritic stainless cast steel
-
Asano M., Osada T., Ikeda A., Abe T., Hoefler T., Nakagawa E., Ohmura T.
High-throughput evaluation of hardness dependence on composition and temperature in Ni–Co binary alloy systems
-
Zhang W., Forti M., Xie R., Barreteau C., Abe T., Joubert J.-M., Hammerschmidt T., Crivello J.-C.
Prediction and characterization of chemically complex σ−phase intermetallics with graph neural network
-
Machida S., Yokoe D., Suzuki M., Shibue T., Okuma G., Takeda D.
Mutual Phase Stability between Kaolinite-Derived Hexacelsian and Zirconia in a Mixed System
-
Hatakeyama T., Sawada K.
Creep damage evaluation of 18Cr–9Ni–3Cu–Nb–N steel by electron backscattered diffraction (EBSD) – comparison of traditional Hough Indexing and novel Spherical Indexing –
-
Nagira T., Kitano H., Kimura T., Yoshinaka F., Takamori S., Sawaguchi T., Yamashita T., Aoki Y., Fujii H.
In situ synchrotron X-ray imaging of curved columnar growth and ripple formation in Fe-Mn-Cr-Ni-Si alloy during GTA welding
-
Rahman M., Maeda T., Osada T., Ozaki S.
Finite Element Analysis of R-Curve Behavior in Ceramics Using the Damage Model Based on the Cohesive-Zone Relationship
-
Hatakeyama T., Ida S., Sawada K., Yoshimi K.
Microstructure Development during Creep Deformation of 9Cr-1Mo-V-Nb Steel with Excess Nitrogen Introduced by Solution Nitriding – Multidimensional Scatter Diagram Analysis of STEM-EDS Maps by Machine Learning
-
Venkataramanan N.S., Suvitha A., Sahara R.
Investigating native cyclodextrins as carriers for gefitinib delivery: a DFT analysis
-
Ichihara F., Miyoshi S., Ode M., Masuda T.
Co-sintering Reaction Analysis of LiCoO2Cathodes and NASICON-Type LATP Solid Electrolytes Studied by Experimental and Computational Methods
-
Utada S., Heczko M., Rame J., Hamadi S., Dlouhý A., Kruml T., Villechaise P., Reed R.C., Mills M.J., Cormier J.
Origin of localizing creep damage in Ni-based single crystal superalloys pre-strained at room temperature
-
Tanaka M., Muramatsu M., Ode M., Abe T.
Thermodynamic reassessment of the Fe–Pt system
-
Goto M., Sasaki M., Moronaga T., Hara T., Xu Y.
Room-temperature FeSi2-doped Cu2Se thermoelectric films with enhanced figure of merit
-
Kong Y.K., Alterman D., Murakami H., Tokoro C.
Assessing the usability of biomass-derived sheep wool fibers in sustainable construction: A comprehensive review
-
Somekawa H., Gong W., Kawasaki T., Harjo S., Singh A., Tomota Y.
Revealing deformation mechanism of fine-grained Mg alloys via in-situ neutron diffraction analysis
-
Kunichika M., Nakamura M., Matsuoka T., Somekawa H.
Mechanical Properties of Powder Metallurgy Extruded Al Based Composites Using Sheath
-
Shibata A., Nakamura A., Moronaga T., Okada K., Hara T., Ueji R.
Three-dimensional morphologies, substructures, and crystallography of pearlite in carbon steel
-
Lan X., Tsuzaki K., Ueji R., Shibata A.
Achieving Remarkable Enhancement of Yield Strength Ensuring Large Ductility in a Metastable Fe50Mn30Cr10Co10 High-entropy Alloy via Warm Rolling Treatment
-
Kawasaki S., Naito K., Tanks J.
Rapid thermal degradation of polyamide 6 microdroplets and its effect on interfacial shear strength to simulate thermal welding conditions of CFRTP
-
Mizuseki H., Sahara R., Hongo K.
Valence electron concentration-dependent stability of L12, D023, and D022 ordered phases in high-entropy alloys
-
Shukla A., Khadka D.B., Li C.; Rikukawa M., Takeoka Y.; Sahara R., Yanagida M., Shirai Y.
Defect mitigation via fullerene-based functional additives for enhanced efficiency and stability in tin perovskite solar cells
-
Venkataramanan N.S., Suvitha A., Sahara R.
Intramolecular Versus Intermolecular Bonding in Drug Gemcitabine and Nucleobases: A Computational Study
-
Komoda R., Kubota M., Staykov A., Zhang N., Wada K.
Effect of water temperature in the deep sea on the mitigation of hydrogen embrittlement by O2 impurity
-
Sundman B., Miani F., van de Walle A., Hallstedt B., Kattner U.R., Tang F., Abe T., Naraghi R., Povoden-Karadeniz E., Jacob A., Chen S., Otis R., Shobu K., Selleby M., Pisch A.
XTDB, an XML based format for Calphad databases
-
Kusano M., Osada T., Watanabe M.
Data-driven optimization of laser scanning conditions in laser powder bed fusion for defect-free IN738LC components
-
Byloff J., Trost C.O.W., Devulapalli V., Altaf Husain S., Faurie D., Renault P.-O., Edwards T.E.J., Cordill M.J., Casari D., Putz B.
Atomic Layer-Deposited Interlayers for Robust Metal-Polymer Interfaces
-
Morino T., Ode M., Hirosawa S.
An explicit integration approach for predicting the microstructures of multicomponent alloys
-
Murata Y., Moronaga T., Egami M., Hayashi K., Nanba S., Hara T., Ohnuma I., Ohmura T.
Accurate measurement of solute profile segregated at steel grain boundary by scanning transmission electron microscope with energy dispersive X-ray spectroscopy
-
Chandiran E., Ogawa Y., Ueji R., Somekawa H.
Effect of Loading Direction on Compression Behaviour of Pure Magnesium at Different Grain-Size and Strain-Rates
-
Okada K., Tsuzaki K., Nakagawa E., Shibata A.
Fatigue Limit Doubling in High-Strength Martensitic Steel through Crack Embryo Engineering–Cyclic-Training-Driven Self-Optimization
-
Hoefler T., Ikeda A., Osada T., Hara T., Kawagishi K., Ohmura T.
Automated system for high-throughput process-structure-property dataset generation of structural materials: A γ/γ′ superalloy case study
-
Sekido N., Nagai H., Hatakeyama T., Yoshimi K., Sawada K.
Microstructural Characteristics of Modified 9Cr-1Mo Steel with Low Creep Ductility
-
Katsui H., Shimoda K., Hotta M.
Rapid and high-homogeneity interphase coating on silicon carbide monofilaments by chemical vapor deposition facilitated by a swept laser beam
-
Tanks J., Akagawa T., Tamura K., Nemoto Y., Naito K., Watanabe Y., Nge T.T., Yamada T.
Enhancing the thermo-oxidative stability of polyamide 6 by scalable melt-blending with PEG-grafted glycol lignin
-
Ichihara F., Miyoshi S., Ode M., Masuda T.
Co-sintering Reaction Analysis of LiCoO2 Cathodes and NASICON-Type LATP Solid Electrolytes Studied by Experimental and Computational Methods
-
Okuma G., Shimizugawa T., Ozaki S., Osada T., Machida S., Arai Y., Inoue R., Kakisawa H., Sada Y., Uesugi M., Takeuchi A., Wakai F.
Strength-limiting defects evolved from heterogeneities during the sintering of high-purity submicron alumina powder
-
Zaiser E., Fareed A., Manzoni A.M., Paulisch-Rinke M.C., Hsu W.-C., Yeh A.-C., Murakami H., Vogel F., Maaß R.
Pinning-dominated strengthening in high-entropy superalloys
-
Bainsla L., Sakuraba Y., Kumar A., Chaurasiya A.K., Masuda K., Suwannaharn N., Awad A.A., Behera N., Khymyn R., Sasaki T., Dash S.P., Åkerman J.
Energy-Efficient Single Layer Spin Hall Nano-Oscillators Driven by Berry Curvature
-
Vidilli A.L., Gomes L.F., Oliveira A.P., Saha M., Sasaki T., Otani L.B., Okulov I., Bolfarini C.
Segregation-induced microstructural refinement in a FeMnAlC-TiB metal matrix composite by laser powder bed fusion
-
Saito T., Harada H., Osawa M., Yokokawa T., Kawagishi K., Suzuki S.
Elastic moduli of 6th generation Ni-base single crystal superalloy TMS-238 and its tie-lined γ and γ′ phases
-
Inoue T., Iwai M.
Pinching simulation of the coconut crab considering the 3D shape and internal characteristics of the robust claw exoskeleton
-
Chen H., Egusa D., Li Z., Sasaki T., Ozasa R., Ishimoto T., Okugawa M., Koizumi Y., Nakano T., Abe E.
Phase-separation induced dislocation-network cellular structures in Ti-Zr-Nb-Mo-Ta high-entropy alloy processed by laser powder bed fusion
-
Guo S., Okuma G., Naito K., Kakisawa H.
Volume fraction dependence of electrical conductivity in B4C-based composites with ZrB2-ZrC
-
Tan X.F., Paul V., Ohmura T., McDonald S.D., Nogita K.
Nanoindentation Study of Phases in Near-Eutectic Sn-Bi Alloy
-
Tanks J., Tamura K.
Room-Temperature Material Recycling/Upcycling of Polyamide Waste Enabled by Cosolvent-Tunable Dissolution Kinetics
-
Hatakeyama T., Ida S., Sawada K., Yoshimi K.
Microstructure Development during Creep Deformation of 9Cr–1Mo–V–Nb Steel with Excess Nitrogen Introduced by Solution Nitriding – Multidimensional Scatter Diagram Analysis of STEM-EDS Maps by Machine Learning –
-
Kimura Y.
Preface to the 110th Anniversary Special Issue of Tetsu-to-Hagané
-
Kato H., Horii Y., Watanabe C., Sasaki T., Ichiyanagi K., Noguchi M., Fujimori H., Yamamoto T., Suzuki H., Hirai Y., Ohmura T., Yano K., Hayashi S., Kajiwara T.
Molecular Thermal Engine Based on a Highly Flexible Elastic Crystal
-
Ishimoto T., Morita N., Ozasa R., Matsugaki A., Gokcekaya O., Higashino S., Tane M., Mayama T., Cho K., Yasuda H.Y., Okugawa M., Koizumi Y., Yoshiya M., Egusa D., Sasaki T., Abe E., Kimizuka H., Ikeo N., Nakano T.
Superimpositional design of crystallographic textures and macroscopic shapes via metal additive manufacturing—Game-change in component design
-
Bhattacharyya J.J., Faberman S., Li Z., Sullivan A., Cheng D., Khoury B., Gao Y., Sasaki T., Zhou B., Warner D., Agnew S.R.
Guinier-Preston (GP) zone strengthening of dilute magnesium alloys comprised of earth-abundant elements
-
Bhattacharyya J.J., Faberman S., Sullivan A., Saha M., Sasaki T., Agnew S.R.
Strain partitioning-induced anisotropy in thermomechanically processed magnesium alloys comprised of earth-abundant elements
-
Edalati K., Ahmed A.Q., Akrami S., Ameyama K., Aptukov V., Asfandiyarov R.N., Ashida M., Astanin V., Bachmaier A., Beloshenko V., Bobruk E.V., Bryła K., Cabrera J.M., Carvalho A.P., Chinh N.Q., Choi I.-C., Chulist R., Cubero-Sesin J.M., Davdian G., Demirtas M., Divinski S., Durst K., Dvorak J., Edalati P., Emura S., Enikeev N.A., Faraji G., Figueiredo R.B., Floriano R., Fouladvind M., Fruchart D., Fuji M., Fujiwara H., Gajdics M., Gheorghe D., Gondek, González-Hernández J.E., Gornakova A., Grosdidier T., Gubicza J., Gunderov D., He L., Higuera O.F., Hirosawa S., Hohenwarter A., Horita Z., Horky J., Huang Y., Huot J., Ikoma Y., Ishihara T., Ivanisenko Y., Jang J.-I., Jorge A.M., Kawabata-Ota M., Kawasaki M., Khelfa T., Kobayashi J., Kommel L., Korneva A., Kral P., Kudriashova N., Kuramoto S., Langdon T.G., Lee D.-H., Levitas V.I., Li C., Li H.-W., Li Y., Li Z., Lin H.-J., Liss K.-D., Liu Y., Cardona D.M.M., Matsuda K., Mazilkin A., Mine Y., Miyamoto H., Moon S.-C., Müller T., Muñoz J.A., Murashkin M.Y., Naeem M., Novelli M., Olasz D., Pippan R., Popov V.V., Popova E.N., Purcek G., de Rango P., Renk O., Retraint D., Révész Á., Roche V., Rodriguez-Calvillo P., Romero-Resendiz L., Sauvage X., Sawaguchi T., Sena H., Shahmir H., Shi X., Sklenicka V., Skrotzki W., Skryabina N., Staab F., Straumal B., Sun Z., Szczerba M., Takizawa Y., Tang Y., Valiev R.Z., Vozniak A., Voznyak A., Wang B., Wang J.T., Wilde G., Zhang F., Zhang M., Zhang P., Zhou J., Zhu X., Zhu Y.T.
Erratum to ’ Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review’ [J. Alloys Compd. 1002 (2024) 174667](S0925838824012544)(10.1016/j.jallcom.2024.174667)
-
Maeda T., Osada T., Ozaki S.
Reliability evaluation scheme for ceramics based on defect size distribution inversely estimated from standardized tests
-
Shimizu K., Yamaguchi M., Akamaru S., Nishimura K., Abe R., Sasaki T.T., Wang Y., Toda H.
Revisiting hydrogen trapping in Mg32(Al, Zn)49 approximant crystal: Influence of chemical disorder
-
Meng L., Kitashima T., Lin P., Wang Z., Jiang Z., Huang Q., Zhao J.
Achieving polymer-like ultrahigh elasticity in Ti−6Al−4V alloy via a new cryo-deformation induced α′-to-α″ martensite phase transformation
-
Klimashin F.F., Učík M., Matas M., Holec D., Beutner M., Hackert-Oschätzchen M., Xomalis A., Schwiedrzik J.J., Klusoň J., Jílek M., Lümkemann A., Michler J., Edwards T.E.J.
Superstoichiometric (Al,Cr)N: Nitrogen's whereabouts and role in structure-property relationships
-
Guo S., Okuma G., Naito K., Kakisawa H.
Effect of thermal exposure at 1200 °C and 1400 °C on microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics
-
Kikuchi K., Nakata T., Li Z.H., Sasaki T.T., Miyashita Y., Kamado S.
Strategic approach to simultaneously enhance strength, formability, and corrosion-resistance synergy of age-hardenable Mg-Zn-Ca-Al-Mn alloy sheet with low Mn content via optimizing Zn and Ca contents
-
Okuma G.
Multiscale Synchrotron X-ray CT Analysis of Sintering Defects for Highly Reliable Materials
-
Daram P., Kusano M., Watanabe M.
Investigation of the Process Optimization for L-PBF Hastelloy X Alloy on Microstructure and Mechanical Properties
-
Wang M., Ishii A., Sakaushi K.
Accelerated Electrocatalyst Degradation Testing by Accurate and Robust Forecasting of Multidimensional Kinetic Model with Bayesian Data Assimilation
-
Kautsar Z.H., Sepehri-Amin H., Tang X., Kulesh N., Sasaki T.T., Ohkubo T., Hono K.
Heavy rare earth-free high resistivity and coercivity Nd-Fe-B hot-deformed magnet developed by Pr-Cu diffusion and CaF2-LiF eutectic addition
-
Koyama M., Sawaguchi T.
Overview of ε-Martensite-Related Damage Evolution and its Solution: Pathways for Local Stress Accommodation, Plastic Damage Retardation, and Microcrack Arrest
-
Ida S., Nakagawa E., Paul V., Ohmura T., Yoshimi K.
Enhanced deformability of TiC in Mo-Ti-C ternary system by off-stoichiometry
-
Ishii A., Koyama T., Abe T., Ode M.
Phase-field simulation coupled with a CALPHAD database for analyzing microstructural evolution during liquid-phase sintering of Nd–Fe–B magnets
-
Mori S., Ii S., Moronaga T., Hara T., Karube K., Taguchi Y., Tokura Y., Yu X.
Direct Observations of Mechanical Strain-Induced Wavevector Switching in a (Fe,Ni,Pd)3P Magnet with Anisotropic Dzyaloshinskii-Moriya Interaction
-
Torigoe S., Nakashima Y., Tsuzuki Y., Takata K., Ikeda K.-I., Ii S.
Evolution of microstructures during isothermal annealing in hot-rolled Al-Mn alloys
-
Bhandari L., Gaur V., Briffod F., Shiraiwa T., Enoki M.
High-temperature fatigue and creep damage mechanism in additively manufactured Ti-6Al-4V alloy
-
Saito T., Yuyama M., Murakami H.
Effect of cobalt presence on creep properties of Ni-based single crystal superalloys at intermediate temperature
-
Ii S., Ikeda K.-I., Hara T.
Multi-dimensional quantitative analysis of precipitates in the hot-rolled Al-1%Mn alloy
-
Shimizu K., Toda H., Hirayama K., Fujihara H., Tsuru T., Yamaguchi M., Sasaki T.T., Uesugi M., Takeuchi A.
Hydrogen embrittlement in Al–Zn–Mg alloys: Semispontaneous decohesion of precipitates
-
Abe Y., Tsuru T., Fujita Y., Ohtomo M., Sasaki T.T., Yamashita S., Okubo N., Ukai S.
Effects of Al addition on Vickers hardness increase by thermal aging of Fe–Cr–Al alloys — Evaluation by systematic experiments, machine learning modeling, and first-principles calculations
-
Park M.-H., Shibata A., Harjo S., Tsuji N.
Grain refinement of dual phase steel maximizes deformation ability of martensite, leading to simultaneous enhancement of strength and ductility
-
Filimonov A.M., Alam K.M.S., Kvaratskheliya A.R., Grieb T., Sharma B.K., Bianchini B., dos Santos R.F.M., Gomes L.F., Rosenauer A., Gargarella P., Suwannaharn N., Sasaki T.T., Mädler L., Okulov I.V.
Laser processing of a CuTiZr-based alloy by powder bed fusion: From bulk metallic glass to metallic glass composite
-
Kvaratskheliya A., Filimonov A., Bianchini B., Jundullah Hanafi M.I., Gesing T.M., Sasaki T.T., Gargarella P., Mädler L., Okulov I.
Making parts on Mars: Laser processing of iron contaminated by regolith simulant
-
Somekawa H., Ono Y., Naito K., Singh A.
Enhancement of ductility in low temperature regimes via detwinning in Mg alloys
-
Tozman P., Hrkac G., Patrick C.E., Staunton J.B., Saito T., Sasaki T., Ohkubo T., Sepehri-Amin H.
Effect of Co on twin formation and magnetic properties of Sm(Fe,Ti,V)12 alloys
-
Lan X., Okada K., Ueji R., Shibata A.
Improving hydrogen embrittlement resistance in high-strength martensitic steels via thermomechanical processing
-
Banoth S., Moreau L.E., Palleda T.N., Ishida A., Kakehi K., Murakami H.
The effect of yttrium addition on the oxidation behaviour of Al-free Hastelloy-X built by the laser powder bed fusion process
-
Saito T., Harada H., Abe T., Murakami H.
CALPHAD approach for prediction of local phase transformation at superlattice stacking fault in gamma prime precipitates in superalloys with multi-component system
-
Khadka D.B., Shirai Y., Sahara R., Yanagida M., Miyano K.
Ameliorating Defects in Wide Bandgap Tin Perovskite Solar Cells Using Fluorinated Solvent and Hydrazide
-
Wang J., Lin H., Tanks J.D., Arao Y.
Large-area high thermal conductivity graphite-carboxymethylcellulose film easily produced by mechanical exfoliation of natural graphite using a three-roll mill
-
Liang S.J., Yoshino T., Matusmoto R., Sahara R., Toda Y., Matsunaga S., Miyamoto G., Yamabe-Mitarai Y.
Deformation mechanisms of hexagonal close-packed-multi-principal element alloys (HCP-MPEAs) with equiaxed structures
-
Nandal V., Dieb S., Bulgarevich D.S., Osada T., Koyama T., Minamoto S., Demura M.
Analysis of artificial intelligence-discovered patterns and expert-designed aging patterns for 0.2 % proof stress in Ni-Al alloys with γ – γ' two-phase structure
-
Kawabata T., Kitano H., Ozawa T., Mikami Y.
Reverse bend experiments on the base plate and discussion of the appropriate amount of reverse bending for precrack straightness (Effect of the reverse bend process on the CTOD toughness evaluation and understanding of its mechanisms)
-
Shimizu K., Nakayama S., Shoji H., Kawakubo T., Nagira T., Ohata M., Fujii H.
Significance of fracture toughness for linear friction welded joint of weathering steel
-
Tamura K., Tanks J., Niizeki D., Watanabe Y., Kogure T., Sakuma H., Kamon M.
Heavy metal ion adsorption mechanism of polysulfide-modified layered double hydroxide
-
Furuya Y.
Effects of S-content on Gigacycle Fatigue Properties of SCM440 Steel
-
Lyu Z., Liu Y., Sciazko A., Komatsu Y., Tao J., Nakamura A., Hara T., Sun K., Shikazono N., Han M.
Co-Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells
-
Somekawa H., Hara Y., Moronaga T., Singh A., Ohmura T.
In-situ TEM observation of -axis extension twin formation at grain boundaries
-
Sawada K., Taniuchi Y., Nojima T., Sekido K., Hatakeyama T., Kimura K.
Effect of Cyclic Stress Change on Creep Behavior in ASME P91 Steel
-
Niitsu K., Ichihara F., Miyoshi S., Ode M., Mitsuishi K., Masuda T., Takada K.
Structural analysis of the LiCoO2 cathodes/garnet-type Li6.5La3Zr1.5Ta0.5O12 solid electrolyte interface
-
Jansen H.C., Sharma A., Wieczerzak K., Nayak G.K., Schneider J.M., Schwiedrzik J., Edwards T.E.J., Michler J.
On the efficacy of Xe+-pFIB preparation to avoid Ga+-FIB induced phase transformations in Al-Ni alloys
-
Tasaki W., Tsuchiya K., Nagashima N., Singh A., Sawaguchi T.
Effect of phase stability of FCC and HCP phases on tensile and low-cycle fatigue properties of Co–20Cr–10Mo–xNi medium-entropy alloys
-
Katagiri J., Nomoto S., Kusano M., Watanabe M.
Influence of high Reynolds number flow inside molten pool on keyhole instability-induced pore formation process in laser powder bed fusion
-
Singh A., Basha D.A., Hiroto T., Matsushita Y., Seenuvasaperumal P., Somekawa H., Tsuchiya K.
Deformation behavior of Mg-Zn-Y icosahedral quasicrystal phase in a magnesium matrix by high pressure torsion at room temperature
-
Wada K., Komatsu M., Ono Y., Yamabe J., Enoki H., Iijima T.
Hydrogen-induced degradation of SUS304 austenitic stainless steel at cryogenic temperatures
-
Matsuda M., Ohsumi S., Ii S.
Morphological and Crystallographic Features of α' Martensite in Binary Ti–Hf Alloy
-
Ito T., Ogawa Y., Gong W., Mao W., Kawasaki T., Okada K., Shibata A., Harjo S.
Role of solute hydrogen on mechanical property enhancement in Fe–24Cr–19Ni austenitic steel: An in situ neutron diffraction study
-
Shimoda K., Kakisawa H.
Preparation of enhanced erosive wear resistance SiC-fiber-reinforced SiC ceramic matrix composites integrated with a knit fabric via high-temperature crystallization of amorphous Si–C–O–Al fibers
-
Yoshinaka F., Sawaguchi T., Takamori S., Emura S., Singh D.
Retarded fatigue crack growth in Fe–15Mn–10Cr–8Ni–4Si via reversible γ ↔ ε transformation
-
Kitano H., Saitou N., Takahashi T.
Study on AI Collaborative System for Efficient Skill Improvement of Welding Skills Trainee*
-
Ogawa Y., Takakuwa O., Shibata A.
Overview of gaseous hydrogen-assisted fatigue crack growth in ferritic iron and steels: Bridging micro and macro
-
Guo S., Okuma G., Naito K., Kakisawa H.
Microstructure and mechanical properties of reactive hot-pressed LaMgAl11O19 ceramics
-
Nakamura G., Iwasaka A., Furuya Y., Takahashi K.
Effects of Laser Peening on Rotating Bending Fatigue Strength of Additive Manufactured Maraging Steel in Very High Cycle Fatigue Regime
-
Nomoto S., Kusano M., Kitashima T., Watanabe M.
Numerical simulation method for the laser powder bed fusion process by lattice Boltzmann and multi-phase field methods
-
Kuramoto S., Kawano Y., Mori Y., Kobayashi J., Emura S., Sawaguchi T.
Mechanical Properties and Deformation Behavior in Severely Cold-Rolled Fe-Ni-Al-C Alloys with Lüders Deformation -Overview with Recent Experimental Results -
-
Yurishima R., Ikeda A., Ikeda T.
Determination of the Entire Existence Composition Range of CrMnFeCoNi High-Entropy Alloys Using Sintered Diffusion Multiple Method
-
Redarce T., Iwata K., Ogawa Y., Tsuzaki K., Shibata A., Matsunaga H.
Ausformed high-strength low-alloy steel exhibits exceptional resistance to fatigue crack-growth in high-pressure hydrogen environments
-
Chen T.-W., Wu B.-C., Kang Y.-C., Murakami H., Toda Y., Chung T.-F., Kumar Misra R.D., Yeh A.-C.
The impact of grain boundary serration treatments on the creep deformation of Udimet-720Li superalloy
-
Asano M., Hirayama T., Somekawa H., Matsuoka T.
Sudden drop in friction coefficient of extruded Mg matrix composites
-
Kimura Y., Moronaga T., Tsuzaki K.
Enhanced Resistance to Delayed Fracture in 0.09 mass% P-Doped High-Strength Steel Processed by Warm Tempforming
-
Meng L., Kitashima T., Lin P., Zheng L., Jiang Z., Zhao J.
In situ EBSD investigation of microtexture evolution and slip activation of α macrozones during tensile deformation in Ti-6Al-4V alloy
-
Honda H., Watanabe M.
Measurement of Laser Absorptivity of Inconel Powders with Additive Manufacturing Machine
-
Ogawa Y., Shibata A.
Plastic flow in Fe-Cr-Ni austenitic steel under the presence of solute H: A study via room temperature creep
-
Zaiser E., Fantin A., Manzoni A.M., Hesse R., Többens D.M., Hsu W.-C., Murakami H., Yeh A.-C., Pavel M.J., Weaver M.L., Zhu H., Wu Y., Vogel F.
Elucidating hierarchical microstructures in high entropy superalloys: An integrated multiscale study
-
Takakuwa O., Ogawa Y.
Modeling hydrogen-assisted fatigue crack growth in low-carbon steel focusing on thermally activated hydrogen-dislocation interaction
-
Briffod F., Yasuda K., Zhu J., Shiraiwa T., Jhon M., Gunawan F., Sahay R., Raghavan N., Budiman A.S., Enoki M.
Fatigue and fracture of accumulative roll-bonded Cu/Nb materials: Effects of layer thickness and loading direction
-
Hibi Y., Matsumoto T., Midorikawa M., Uesaka S., Mizoshiri M., Tanimura T., Okada M., Naito K., Naito M.
Defining the degree of degradation in plastics: Quantification of accumulated degradation products and leached stabilizers for predicting end-of-life
-
Lee J.-L., Tsai C.-C., Chou P.-H., Yeh A.-C., Murakami H.
Development of oxidation-resistant L12-strengthened medium to high entropy alloys for additive manufacturing
-
Yoshimura S., Wada K., Park S., Matsunaga H.
Factors determining the torsional fatigue strength in bainitic steels with banded microstructures
-
Yoshida S., Fu R., Gong W., Ikeuchi T., Bai Y., Feng Z., Wu G., Shibata A., Hansen N., Huang X., Tsuji N.
Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys
-
Tai C.-L., You J.-D., Chen J.-J., Liang S.-C., Chung T.-F., Yang Y.-L., Ii S., Ohmura T., Zheng X., Chen C.-Y., Yang J.-R.
In-situ transmission electron microscopy investigation of the deformation mechanism in CoCrNi and CoCrNiSi0.3 nanopillars
-
Rahman M., Maeda T., Osada T., Ozaki S.
Finite element analysis of crack propagation, crack-gap-filling, and recovery behavior of mechanical properties in oxidation-induced self-healing ceramics
-
Gorsse S., Lin W.-C., Murakami H., Rignanese G.-M., Yeh A.-C.
Advancing refractory high entropy alloy development with AI-predictive models for high temperature oxidation resistance
-
Shimoda K., Colin C.
In situ monitoring of the mechanical and electrical property changes of amorphous Si–Al–C–O fibers during heating to 1900 °C and correlation of these changes with the accompanying structural and crystallinity changes
-
Singh D., Yoshinaka F., Takamori S., Emura S., Sawaguchi T.
Revealing extraordinary plasticity in single crystal Fe-15Mn-10Cr-8Ni-4Si alloy