Mercer C., Hasegawa A., Hosoda N.
Surface-activated bonding between a 3D-printed Ti-6Al-4V structure and bulk aluminum
研究Research
論文 2024
-
-
Manjanath A., Sahara R., Kawazoe Y., Ohno K.
Non-Adiabatic Excited-State Time-Dependent GW (TDGW) Molecular Dynamics Simulation of Nickel-Atom Aided Photolysis of Methane to Produce a Hydrogen Molecule
-
Shimizu K., Nakayama S., Shoji H., Kawakubo T., Nagira T., Ohata M., Fujii H.
Significance of fracture toughness for linear friction welded joint of weathering steel
-
Kuroda T., Masuyama H., Toda Y., Matsunaga T., Ito T., Watanabe M., Ozasa R., Ishimoto T., Nakano T., Shimojo M., Yamabe–Mitarai Y.
Microstructure Evolution and High–Temperature Mechanical Properties of Ti–6Al–4Nb–4Zr Fabricated by Selective Laser Melting
-
Bulgarevich D.S., Watanabe M.
Stress–strain curve predictions by crystal plasticity simulations and machine learning
-
Manaka T., Tsutsumi Y., Takada Y., Chen P., Ashida M., Doi K., Katayama H., Hanawa T.
Galvanic Corrosion among Ti–6Al–4V ELI Alloy, Co–Cr–Mo Alloy, 316L–Type Stainless Steel, and Zr–1Mo Alloy for Orthopedic Implants
-
Muto Y., Kammuri K., Miyake J., Ode M., Kurashiki T., Mori H.
Numerical Analysis to Evaluate the Effect of Cooling Rates on Microstructures in Casted Cu-Ni-Si Alloys by Phase-Field Simulation
-
Chiba Y., Otsuka H., Amano S., Inutsuka J., Iwasaki Y., Inoue Y., Motomura S., Kushibe A., Sawaguchi T., Nakamura T.
Development of Manufacturing Technology for Fe-Mn-Si Alloys with Excellent Low-Cycle Fatigue Properties and Application to Seismic Dampers for Buildings
-
Hagiwara M., Kitashima T.
High Cycle Fatigue and Very High Cycle Fatigue of Orthorhombic (O + α2)–Type Ti–27.5Nb–13Al Alloy with and without B and Fatigue Striation Analysis in Comparison with (α + β)–Type Titanium Alloys
-
Yurishima R., Takagiwa Y., Ikeda A., Ikeda T.
Microstructure Optimization of Thermoelectric τ1-Al2Fe3Si3 via Graded Temperature Heat Treatments
-
Yamabe J., Hashiguchi K., Wada K.
EFFECTS OF HYDROGEN ON FATIGUE LIFE PROPERTIES OF COLD-ROLLED METASTABLE AUSTENITIC STAINLESS STEELS WITH ARTIFICIAL DEFECTS
-
Saito T., Harada H., Yokokawa T., Osawa M., Kawagishi K., Suzuki S.
Raft Structure of Nickel Base Single-Crystal Superalloys
-
Manaka T., Tsutsumi Y., Ashida M., Chen P., Hanawa T.
Corrosion behavior of Zr-14Nb-5Ta-1Mo alloy in simulated body fluid
-
Katagiri J., Nomoto S., Kusano M., Watanabe M.
Effect of mushy zone constant in Voller-Prakash model on keyholing behaviour in laser powder bed fusion simulation
-
Hashimoto M., Yamaguchi N., Hashimoto S., Murata H., Kitaoka S., Yokoe D., Ito T., Kato T., Kanetaka H., Kakisawa H.
Development of segmented titanium oxynitride layer with spinform surfaces exhibiting antibacterial properties
-
Ohno K., Sahara R., Nanri T., Kawazoe Y.
Optical properties of rutile TiO2 with Zr, Mo, Zn, Cd impurities
-
Koyama M., Shimizu K., Ri S., Koga N., Nishikawa H., Morikawa T., Fudouzi H.
Microscopic Strain Mapping: Functional Diversity and Their Demands
-
Naito K., Nagai C., Kawasaki S.
Tensile Properties and Weibull Modulus of Polymeric-Fiber-Reinforced Epoxy-Impregnated Bundle Composites
-
Yokokawa T., Osada T., Tabata C., Kohata T., Takata Y., Yuyama M., Kawagishi K.
Effect of Solution Heat Treatment on Dendritic Segregation and Creep Strength of Ni-Base Single Crystal Superalloy TMS-238
-
Yoshida S., Yamashita G., Ikeuchi T., Bai Y., Shibata A., Tsuji N.
Grain size dependent deformation microstructure evolution and work-hardening in CoCrNi medium entropy alloy
-
Katayama H., Yoshida Y., Akashi T., Kadowaki M., Murase Y., Tsutsumi Y.
Corrosion Risk Prediction of Carbon Steels by Hyperspectral Analysis
-
Katayama H.
Preface to the Special Issue “Diagnostic, Evaluation and Data Utilization Technologies for Corrosion Deterioration of Infrastructures”
-
Lyu Z., Liu Y., Sciazko A., Komatsu Y., Tao J., Nakamura A., Hara T., Sun K., Shikazono N., Han M.
Co-Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells
-
Yoshizumi H., Yuasa M., Miyamoto H., Somekawa H.
Influence of different wrought processes on the microstructure and texture evolution in AZ31 magnesium alloy
-
Deffrennes G., Hallstedt B., Abe T., Bizot Q., Fischer E., Joubert J.-M., Terayama K., Tamura R.
Data-driven study of the enthalpy of mixing in the liquid phase
-
Park M.-H., Matsubayashi R., Shibata A., Tsuji N.
Quantitative characterization of local deformation-fracture behavior in ferrite-martensite dual-phase steels with different martensite distributions
-
Yamada M., Nakazawa R., Itoh A., Yasui S., Kobayashi Y., Abe T.
Oxygen Solubility in Molten Sm–La–O Alloys and Equilibrated Oxide Phases
-
Verona I.C.M., Bardolaza H.R., Juguilon V.P.P., Bulgarevich D.S., Watanabe M., Tani M., Estacio E.S.
Investigation of Spin-Current Lifetime in Fe/Pt Spintronic Terahertz Emitter using Double Optical Pump Technique
-
Lee J.-L., Yeh A.-C., Murakami H.
Oxidation Properties of Additively Manufactured High Entropy Alloys: A Short Review
-
Park M.-H., Fujimura Y., Shibata A., Tsuji N.
Effect of martensite hardness on mechanical properties and stress/strain-partitioning behavior in ferrite + martensite dual-phase steels
-
Lavakumar A., Hwang S., Okada K., Park M.-H., Chokshi A.H., Tsuji N.
Real-time Observation of Stress-strain Behavior beyond Necking in Martensitic Steel by in-situ Synchrotron X-ray Diffraction
-
Nagira T., Nakamura T., Yoshinaka F., Sawaguchi T., Inoue Y.
Microstructure and Mechanical Properties of Gas Metal Arc-welded Fe-Mn-Si Seismic Damping Alloy
-
Lin W.-C., Lien Y.-W., Moreau L.E., Murakami H., Lo K.-C., Gorsse S., Yeh A.-C.
High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys
-
Inoue T., Hai Q., Nakazato K.
Reliability of the Young's modulus of crab exoskeleton materials estimated from nanoindentation tests
-
Negami M., Morihashi R., Yoshino T., Sahara R., Yamabe-Mitarai Y.
Effect of reactive elements in MCrAlX bond coat for durability improvement of thermal barrier coatings
-
Naito K., Nagai C.
Raman Scattering for Tensile Testing of Polyacrylonitrile-Based and Pitch-Based Single Carbon Fibers
-
Hayama C., Kadowaki M., Murase Y., Katayama H., Hara T., Hara Y., Watanabe H., Shitanda I., Itagaki M.
Effect of P Addition on the Corrosion Resistance of Steels before and after Rust Formation
-
Mansoz B., Caron P., Kawagishi K., Ormastroni L.M.B., Villechaise P., Cormier J., Pettinari-Sturmel F.
Tensile Behavior of TMS-238 Ni-Based Single-Crystal Superalloy at 650 °C
-
Furuya Y.
Gigacycle Fatigue of Metallic Materials Evaluated by Ultrasonic Fatigue Testing
-
Yamasaki M., Matsumoto T., Mayama T., Somekawa H., Hagihara K., Nishimoto S., Kawamura Y.
Dynamic recovery around deformation kink boundary of Mg-Y-Zn alloy with long-period stacking ordered structure
-
Saito T., Harada H., Yokokawa T., Osawa M., Kawagishi K., Suzuki S.
Effect of the Interfacial Strain Anisotropy on the Raft Structure of Ni-Base Single Crystal Superalloys and Novel Alloy Design Approach by Controlling the Lattice Misfit and the Elastic Misfit
-
Tabata C., Osada T., Ohmura T., Yokokawa T., Kawagishi K., Suzuki S.
Interfacial Strength Evaluation Between Sulfur-Segregated Al2O3 and Ni–Al Single Crystal Alloy Using Nanoindentation
-
Okada K., Shibata A., Kimura Y., Yamaguchi M., Ebihara K.-I., Tsuji N.
Effect of carbon segregation at prior austenite grain boundary on hydrogen-related crack propagation behavior in 3Mn-0.2C martensitic steels
-
Singh D., Yoshinaka F., Takamori S., Emura S., Sawaguchi T.
Breaking the strength-ductility trade-off in austenitic stainless steel at cryogenic temperatures: Mechanistic insights
-
Kawagishi K., Tabata C., Yokokawa T., Takata Y., Yuyama M., Horie T., Maezawa H., Suzuki S., Harada H.
Effects of Trace Impurities in Ni-Base Single Crystal Superalloys on High-Temperature Properties and Disablement of Impurities by CaO for Recycle of Superalloys
-
Kusano M., Watanabe M.
Controlling heat accumulation through changing time per layer in laser powder bed fusion of nickel-based superalloy
-
Okada K., Shibata A., Matsumiya H., Tsuji N.
Origin of Serrated Markings on the Hydrogen Related Quasi-cleavage Fracture in Low-carbon Steel with Ferrite Microstructure
-
Gutierrez-Urrutia I., Ogawa Y., Shibata A.
Hydrogen-enhanced microbanding in an austenitic FeMnAlC low-density steel: Effect on hydrogen embrittlement resistance
-
Osada T., Osawa M., Mori Y., Ikeda A., Harada H., Kohata T., Kawagishi K.
Development of Novel Ni–Co Base P/M Disk Superalloy by Redesigning Based on Turbine Blade Alloy TM-47
-
Hatakeyama T., Sawada K., Kusano M., Watanabe M.
Significant creep-strength improvement in modified 9Cr-1Mo steel via microstructural control through laser powder bed fusion
-
Tammpere H., McKeown P., Miller J., Fang C., Curtis E., Gaiser-Porter M., Burley M., Campbell J., Artiles M., Tang Y., Utada S., Reed R., Clyne T.
Profilometry-Based Indentation Plastometry at High Temperature
-
Chen T.-W., Wu B.-C., Kang Y.-C., Murakami H., Toda Y., Yeh A.-C.
Effect of Grain Boundary Serrations on Creep Deformation of Udimet-720Li Superalloy
-
Ishii A., Koyama T., Abe T., Ode M.
Multi-phase-field modeling of sintering applicable to solid-state and liquid-phase sintering in multiphase and multicomponent systems
-
Manabe N., Suzuki A.S., Ninagawa M., Wakabayashi H., Hirayama N., Niinobe K., Tang Y.T., Utada S., McCartney D.G., Reed R.C., Kitagawa H.
Ultralow-Temperature Sintering of Titanium Powder by Spark Plasma Sintering Under Cyclic Pressure
-
Morimoto T., Katoh H., Ishida Y., Hara E., Kusano M., Naito K., Watanabe M., Takagi K., Arai K., Hasegawa K.
Modified double cantilever beam test method for mode-I energy release rate of elastic adhesive layers
-
Hiromoto S., Nozoe E., Hanada K., Yoshimura T., Shima K., Nakamura N., Chiba A.
Comparative Degradation Behavior of Carbonate Apatite-Coated and Hydroxyapatite-Coated Mg-Ca Alloy Plates and Screws in Rabbit Femurs
-
Xia J., Du X., Xiao Y., Zhang L., Wu R.T., Matsushita Y.
Mechanisms of La2Ce2O7/YSZ Double-Ceramic-Layer Thermal Barrier Coatings against Volcanic Ash Corrosion
-
Tamura R., Morito H., Deffrennes G., Naito M., Nose Y., Abe T., Terayama K.
AIPHAD, an active learning web application for visual understanding of phase diagrams
-
Wakeda M.
Nanoscale Analyses of the Deformation and Mechanical Response near Grain boundary in Metals and Alloys
-
Daram P., Morisada Y., Ogura T., Kusano M., Yu J., Fukuda M., Fujii H., Kuroda S., Watanabe M.
Development of Tungsten Repair Technology by Atmospheric Plasma Spraying of Tungsten and Friction Stir Processing
-
Park M.-H., Yako S., Takeda Y., Shibata A., Tsuji N.
Making stress visible: A method to quantify local stress distribution in metals using digital image correlation method
-
Guo S., Okuma G., Naito K., Kakisawa H.
Mechanical behaviours of reactive hot-pressed B4C-based composites with ZrB2-ZrC
-
Ueji R., Sasaki D., Maeda R., Matsuayama A., Tsuzaki K., Shibata A.
Sample Size Effect on the Impact Absorbed Energy in Carbon Steel With Different Microstructures
-
Okuma G., Wakai F.
3D Analysis for High Reliable Electronic Devices Design by Using Synchrotron X-ray CT
-
Hayashi T., Miyagawa R., Yagi Y., Tanaka K., Ota R., Yamasaki N.Y., Mitsuda K., Maehata K., Hara T.
Design and Development of a 224-pixel TES X-Ray Microcalorimeter System for Microanalysis with STEM
-
Tanaka Y., Hirakawa N., Tsuzaki K., Shibata A., Matsunaga H.
Advancements in fracture toughness testing of ultra-high-strength steel sheets: Unraveling the crack-closure effect and unanticipated thickness independence
-
Ogawa Y., Fujita T.
Solid solution-hardening by hydrogen in Fe–Cr–Ni-based austenitic steel studied by strain rate sensitivity measurement: Contributions of effective stress and solute drag
-
Edalati K., Ahmed A.Q., Akrami S., Ameyama K., Aptukov V., Asfandiyarov R.N., Ashida M., Astanin V., Bachmaier A., Beloshenko V., Bobruk E.V., Bryła K., Cabrera J.M., Carvalho A.P., Chinh N.Q., Choi I.-C., Chulist R., Cubero-Sesin J.M., Davdian G., Demirtas M., Divinski S., Durst K., Dvorak J., Edalati P., Emura S., Enikeev N.A., Faraji G., Figueiredo R.B., Floriano R., Fouladvind M., Fruchart D., Fuji M., Fujiwara H., Gajdics M., Gheorghe D., Gondek L., González-Hernández J.E., Gornakova A., Grosdidier T., Gubicza J., Gunderov D., He L., Higuera O.F., Hirosawa S., Hohenwarter A., Horita Z., Horky J., Huang Y., Huot J., Ikoma Y., Ishihara T., Ivanisenko Y., Jang J.-I., Jorge A.M., Kawabata-Ota M., Kawasaki M., Khelfa T., Kobayashi J., Kommel L., Korneva A., Kral P., Kudriashova N., Kuramoto S., Langdon T.G., Lee D.-H., Levitas V.I., Li C., Li H.-W., Li Y., Li Z., Lin H.-J., Liss K.-D., Liu Y., Cardona D.M.M., Matsuda K., Mazilkin A., Mine Y., Miyamoto H., Moon S.-C., Müller T., Muñoz J.A., Murashkin M.Y., Naeem M., Novelli M., Olasz D., Pippan R., Popov V.V., Popova E.N., Purcek G., de Rango P., Renk O., Retraint D., Révész Á., Roche V., Rodriguez-Calvillo P., Romero-Resendiz L., Sauvage X., Sawaguchi T., Sena H., Shahmir H., Shi X., Sklenicka V., Skrotzki W., Skryabina N., Staab F., Straumal B., Sun Z., Szczerba M., Takizawa Y., Tang Y., Valiev R.Z., Vozniak A., Voznyak A., Wang B., Wang J.T., Wilde G., Zhang F., Zhang M., Zhang P., Zhou J., Zhu X., Zhu Y.T.
Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review
-
Venkataramanan N.S., Suvitha A., Sahara R.
Unveiling the Intermolecular Interactions between Drug 5-Fluorouracil and Watson-Crick/Hoogsteen Base Pairs: A Computational Analysis†
-
Ogawa Y., Tanaka M., Fujita T., Shibata A.
Thermally activated dislocation motion in hydrogen-alloyed Fe–Cr–Ni austenitic steel revisited via Haasen plot
-
Manjanath A., Sahara R., Ohno K., Kawazoe Y.
Non-adiabatic excited-state time-dependent GW molecular dynamics (TDGW) satisfying extended Koopmans’ theorem: An accurate description of methane photolysis
-
Murase Y., Katayama H.
Invasion/Permeation Hydrogen in Cathodic Charged SUS316 Columnar Crystals Evaluated with a Scanning Kelvin Probe Force Microscope
-
Nagira T., Kitano H., Kimura T., Yoshinaka F., Takamori S., Sawaguchi T., Yamashita T., Aoki Y., Fujii H., Takeuchi A., Uesugi M.
In-situ observation of solidification behaviors of Fe-Mn-Cr-Ni-Si alloy during TIG melt-run welding using synchrotron radiation X-ray
-
Kamei S., Hirayama T., Somekawa H., Matsuoka T.
Improved wear and friction properties by self-formed SiC layers in Mg/SiC composites
-
Hwang S., Kato H., Okada K., Park M.-H., Lavakumar A., Gholizadeh R., Adachi H., Sato M., Tsuji N.
Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel
-
Iwamoto S., Kondo S., Katsui H., Shimoda K., Yu H., Ogino Y., Kasada R.
Evaluation of equi-biaxial strength of thin sic coatings using ring-on-ring testing and digital image correlation
-
Oguma H., Naito K.
Effects of mean stress on the fatigue properties of core-in-sheath-type carbon/glass hybrid thermoplastic composite rods: Experimental investigation and practical predictive method
-
Yoshinaka F., Nagashima N., Sawaguchi T.
Effect of Strain Rate on the Extremely Low-Cycle Fatigue of Fe-15Mn-10Cr-8Ni-4Si Bidirectional-TRIP Steel
-
Wang C.-Y., Matsunaga S., Toda Y., Murakami H., Yeh A.-C., Yamabe-Mitarai Y.
Effect of Alloying Elements on the High-Temperature Yielding Behavior of Multicomponent γ′-L12 Alloys
-
Morino T., Ode M., Hirosawa S.
Direct CALPHAD coupling phase-field model: Closed-form expression for interface composition satisfying equal diffusion potential condition
-
Saengdeejing A., Sahara R., Toda Y.
Al–Ni–Ti thermodynamic database from first-principles calculations
-
Tsuchida N., Kuramoto S., Ueji R., Gong W., Harjo S., Hiroi K., Kawamura Y.
Change in Mechanical Properties of High-Strength Martensitic Steel by the Combination of Pre-strain and Deformation Temperature
-
Yamabe J., Kato S., Morishita K., Wada K.
Comparison of hydrogen diffusion properties and hydrogen-induced ductility loss of additively and conventionally manufactured 17-4PH stainless steel
-
Daram P., Singh A., Hiroto T., Kitashima T., Watanabe M.
Compositionally graded titanium to aluminum processed by laser powder bed fusion process: Microstructure evolution and mechanical properties
-
Somekawa H., Tsuru T., Naito K., Singh A.
Control of twin boundary mobility by solute segregation in Mg binary alloys
-
Kim S.-H., Osada T., Lee K.-S., Oh Y.-S., Nagashima N., Jang B.-K.
Corrosion behavior of calcium-magnesium-alumino-silicate on (La,Gd)2Zr2O7/YSZ multilayer for thermal barrier coatings
-
Ueji R., Gong W., Harjo S., Kawasaki T., Shibata A., Kimura Y., Inoue T., Tsuchida N.
Deformation-induced Martensitic Transformation at Tensile and Compressive Deformations of Bainitic Steels with Different Carbon Contents
-
Yamabe J., Yoshimoto R., Wada K., Yano T., Fujiyama K., Iijima T., Enoki H.
Determination of hydrogen compatibility for Cu-Al-Ni-Fe-Mn cast alloys prepared by varying Al and Ni contents
-
Morikawa T., Shibata A., Nakamura N., Tanaka M., Higashida K.
Determination of Microscopic Strain Distribution in the Martensitic Transformation of Fe-31Ni Alloy Plates Using the Micro-grid Marker Method
-
Shibata A., Katsuno T., Tsuboi M., Tsuji N.
Effect of Bain Unit Size on Low-temperature Fracture Toughness in Medium-carbon Martensitic and Bainitic Steels
-
Sato K., Mitsuhara M., Nagata K., Kubushiro K., Nomura K., Kimura T., Shioda Y., Sawada K., Kimura K., Nakashima H.
Effect of impurity elements on the creep rupture strength of Gr. 91 steel welded joints at 650 °C
-
Hayama C., Kadowaki M., Murase Y., Katayama H., Hara T., Hara Y., Watanabe H., Shitanda I., Itagaki M.
Effect of P Addition on the Corrosion Resistance of Steels Before and After Rust Formation
-
Yoshinaka F., Tsutsumi Y., Nagira T., Takamori S., Emura S., Sawaguchi T., Katayama H., Nakamura T., Inoue Y., Motomura S., Kushibe A.
Effects of the Cr and Ni Concentrations on the Fatigue and Corrosion Resistances of Fe–Mn–Cr–Ni–Si Alloys for Seismic Damping Applications
-
Kitashima T., Hiroto T., Jodi D.E., Watanabe M.
Fabricating a single-crystal-like β grain structure of a near-β Ti alloy with unique variant selection by laser powder bed fusion
-
Chen T., Ogawa Y., Koyama M.
Growth path and morphology of hydrogen-related cracks in grain-refined tempered martensitic steel produced by cyclic thermal treatment
-
Kim J.H., Miyamoto G., Shibata A., Hojo T., Koyama M., Zhang Y., Furuhara T.
Influence of austenite grain boundary misorientation on hydrogen-induced intergranular crack propagation in a medium carbon martensitic steel
-
Shibata A., Gutierrez-Urrutia I., Nakamura A., Moronaga T., Okada K., Madi Y., Besson J., Hara T.
Local crack arrestability and deformation microstructure evolution of hydrogen-related fracture in martensitic steel
-
Inoue T., Oka S.-I., Hiroto T.
Mechanical Properties, Tissue Structure, and Elemental Composition of the Walking Leg Tips of Coconut Crabs
-
Hwang S., Park M.-H., Bai Y., Lavakumar A., Shibata A., Adachi H., Sato M., Tsuji N.
Mechanism of DSA effect correlating to the macroscopic PLC banding in high-Mn austenitic steel
-
Kakinuma H., Hiromoto S., Hojo T., Ajito S., Koyama M., Akiyama E.
Mechanism of local hydrogen entry into Fe sheets induced by atmospheric corrosion: Significance of potential, pH, and rust layer thickness
-
Ode M., Esaka H., Ishida A., Takamori S., Murakami H.
Observation and Numerical Prediction of Concentration Distribution at Cast Coating Interface of Solid Pt, Ir, Re Using Liquid Ni-Based Alloys
-
Katagiri J., Nomoto S., Kusano M., Watanabe M.
Particle Size Effect on Powder Packing Properties and Molten Pool Dimensions in Laser Powder Bed Fusion Simulation
-
Miyamoto G., Nakada N., Sugiura N., Kadoi K., Neishi Y., Shibata A., Takagi S., Yamanaka A., Yamasaki S.
Preface to the Special Issue on “Martensitic and Bainitic Transformations in Steels; Fundamentals and Their Applications”
-
Shibata A., Madi Y., Besson J., Nakamura A., Moronaga T., Okada K., Gutierrez-Urrutia I., Hara T.
Relationship between Three-dimensional Crack Morphology and Macroscopic Mechanical Properties of Hydrogen-related Fracture in Martensitic Steel
-
Itakura A.N., Kusawake T., Fujimaru T., Miyai S., Matsumoto Y., Murase Y.
Sample Holder for Time Dependence Silver-decoration under Optical Microscope Observation
-
Patel D., Matsumoto A., Kumakura H., Hara Y., Hara T., Maeda M., Liang H., Yamauchi Y., Choi S., Kim J.H., Hossain M.S.A.
Superconducting joints using reacted multifilament MgB2 wires: A technology toward cryogen-free MRI magnets
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Temperature Dependence of Nanoindentation-Induced Deformation Dynamics in Zr-Based Bulk Metallic Glass
-
Ohnuma I., Han K., Lee I., Yamashita T., Kainuma R.
Thermodynamic Evaluation of the Fe-Zn Binary System with Reference to the Latest Experimental Phase Diagram
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Comparative analysis of nanoindentation-induced incipient deformation of zirconium-based bulk metallic glass in various structural states
-
Okuma G., Usukawa R., Osada T., Kondo N., Nakajima H., Okazaki T., Machida S., Arai Y., Inoue R., Kakisawa H., Shimoda K., Takeuchi A., Uesugi M., Wakai F.
Evolution of microstructure and defects in sintering of tape-cast alumina laminates observed by synchrotron X-ray multiscale tomography
-
Kitashima T., Hiroto T., Watanabe M.
Numerical analysis of Al2O3 and TiO2 growth and oxygen dissolution in a metal substrate during the isothermal oxidation of an α-Ti alloy at 973 K
-
Matsunaga H., Yamabe J., Takakuwa O., Ogawa Y., Matsuoka S.
Hydrogen Gas Embrittlement: Mechanisms, Mechanics, and Design
-
Ioroi K., Ohnuma I., Xu X., Kainuma R., Omori T.
Thermodynamic assessment of the Cr–Si binary system
-
Qiu H., Ueji R., Inoue T.
Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel
-
Nagashima N., Hayakawa M., Masuda H., Nagai K.
Estimating the S-N Curve by Machine Learning Random Forest Method
-
Akada T., Ueji R., Mitsuhara M., Yamasaki S., Tanaka M.
Plastic anisotropy in yield stress of drawn pearlitic steels
-
Hatakeyama T., Sawada K.
Precipitation behavior of the M23C6 phase on the coherent twin boundary of 25Cr-20Ni-Nb-N steel
-
Somekawa H., Ueji R., Singh A.
Mechanical response in tension of twin-induced Mg alloys in wide strain rate regimes
-
Okugawa M., Saito K., Yoshima H., Sawaizumi K., Nomoto S., Watanabe M., Nakano T., Koizumi Y.
Solute segregation in a rapidly solidified Hastelloy-X Ni-based superalloy during laser powder bed fusion investigated by phase-field and computational thermal-fluid dynamics simulations
-
Mercer C., Hosoda N.
Analysis of Structure and Function of Ladybird Leg and Subsequent Design and Fabrication of a Simplified Leg Structure for Robotic Applications
-
Banno N., Moronaga T., Hara T., Asai K., Yagai T.
In-depth S/TEM observation of Ti-Hf and Ta-Hf-doped Nb3Sn layers
-
Fushimi K., Higa K., Fujimura A., Shoji S., Kitagawa Y., Hasegawa Y., Katayama H.
Passive Film Formed on Si-Mn Steel in Boric Acid-Borate Buffer at 6.5
-
Koyama M., Yamashita T., Morooka S., Sawaguchi T., Yang Z., Hojo T., Kawasaki T., Harjo S.
Microstructure and Plasticity Evolution During Lüders Deformation in an Fe-5Mn-0.1C Medium-Mn Steel
-
Oka Y., Morimatsu A., Masumura T., Ohmura T., Tsuchiyama T.
Dependence of Carbon and Nitrogen Content on Grain Refinement Strengthening in Austenitic Stainless Steel
-
Honda H., Watanabe M.
Quantifying Laser Absorptivity of Ti–6Al–4V Powder through Additive Manufacturing Systems
-
Hwang S., Bai Y., Gao S., Park M.-H., Shibata A., Tsuji N.
Mechanism of simultaneous increase of strength and ductility with grain refinement in Si-added high-Mn austenitic steel
-
Kura C., Wakeda M., Hayashi K., Ohmura T.
Atomistic study on effects of solute atoms on energy profile of edge dislocation mobility in FCC-Cu alloys
-
Ii S.
Quantitative Characterization by Transmission Electron Microscopy and Its Application to Interfacial Phenomena in Crystalline Materials
-
Kusano M., Takata Y., Yumoto A., Watanabe M.
Effects of time per layer and part geometry on thermal history and microcracking in the fabrication of nickel superalloy samples by laser powder bed fusion
-
Moreau L.E., Banoth S., Ishida A., Murakami H.
Effect of Re Addition on Microstructure and Oxidation Resistance of Co-Cr-Ta-Ti-C Alloys
-
Guo S., Okuma G., Naito K., Kakisawa H.
Mechanical behaviours of hot-pressed rare-earth oxide (RE = Y and La)-doped TaB2-SiC composites
-
Ito C., Maeda T., Higashi R., Osada T., Kohata T., Ozaki S.
Application of extreme value statistics to internal pore distribution in ceramics and prediction of size dependency of strength scatter
-
Ji X., Chong Y., Emura S., Tsuchiya K.
Heterogeneous distribution of isothermal ω precipitates prevents brittle fracture in aged β-Ti alloys
-
Ji X., Emura S., Tsuchiya K.
A unique {332} twin to α″ martensite transition during twin propagation in a Ti-12wt.% Mo alloy with micro-segregation
-
Kawasaki S., Naito K., Ishida O., Shirai T., Uzawa K.
Infrared-thermography measurement of temperature distribution in carbon fiber–reinforced polypropylene during ultrasonic welding
-
Maeda T., Osada T., Ozaki S.
Novel numerical approach for reliability-assurance of ceramics by combining self-crack-healing with proof testing
-
Miyauchi N., Yakabe T., Murase Y., Kitajima M., Takagi S., Itakura A.N.
Apparatus design of operando hydrogen microscope for visualization of time-dependent distribution of hydrogen
-
Nakamura T., Sakai T., Shimamura Y., Oguma H.
Guest editorial of virtual special issue: The eighth international conference on very high cycle fatigue (VHCF8), held online from July 5 to 9, 2021, and distributed from Sapporo, Japan
-
Natarajan Sathiyamoorthy V., Suvitha A., Abdul Rahim S., Sahara R.
Intermolecular hydrogen bond interactions in water clusters of zwitterionic glycine: DFT, MESP, AIM, RDG, and molecular dynamics analysis
-
Ogawa Y.
Temperature-sensitive ductilization in hydrogen-alloyed Fe-Cr-Ni austenitic steel by enhanced deformation twinning
-
Palleda T.N., Chowdhury H.T., Banoth S., Murakami H., Kakehi K.
Effects of yttrium content on solidification, microstructure, and mechanical properties of laser powder bed fused IN718 superalloy
-
Sato Y., Shinzato S., Ohmura T., Hatano T., Yanagimoto J., Ogata S.
Molecular Dynamics Simulation on the Initiation of Plastic Deformation by Nanoindentation
-
Zhang C., Ai M., Wu M., Rong J., Naito K., Yu X., Zhang Q.
Effect of curcumin-modified nanodiamonds on properties of eco-friendly polylactic acid composite films
-
Midorikawa K., Hiromoto S., Yamamoto T.
Carbonate content control in carbonate apatite coatings of biodegradable magnesium
-
Lan X., Okada K., Gutierrrez-Urrutia I., Shibata A.
Quantitative analysis of local plasticity accompanying hydrogen-related fracture in low-carbon martensitic steel
-
Maezawa H., Tabata C., Takata Y., Uzuhashi J., Ohkubo T., Yokokawa T., Harada H., Kawagishi K., Suzuki S.
Improvement of Oxidation Resistance for Ni-Base Single Crystal Superalloy TMS-238 by Suppression of Sb Segregation at Oxide/Substrate Interface Using CaO
-
Ogawa Y., Kuriyama K., Koyama M.
Dual grain size-effects on hydrogen-assisted fatigue crack growth in 1 GPa-class medium-carbon martensitic steel
-
Okuma G., Wakai F.
Synchrotron X-ray multiscale tomography: Visualization of heterogeneous microstructures and defects in ceramics
-
Hirai Y., Wrona-Piotrowicz A., Zakrzewski J., Ciechańska M., Ohmura T., Takeda T., Nakanishi T., Métivier R., Allain C.
Mechanofluorochromism and self-recovery of alkylsilylpyrene-1-carboxamides
-
Kusano M., Watanabe M.
Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning
-
Nishikawa H., Furuya Y., Kitano H., Kanegae Y., Aota K., Kuwabara K.
Distinctive fatigue properties of additively-formed CoCrFeNiTiMo multi-principal element alloy: Excellent fatigue crack growth resistance against ordinally high cycle fatigue strength
-
Somekawa H., Tsuru T., Singh A.
Grain boundary plasticity in Mg binary alloys by segregation of p-block element
-
Somekawa H., Nakagawa E., Hara Y., Moronaga T., Ogawa Y., Singh A., Ohmura T.
In-situ TEM observation of -axis extension twin nucleation in single crystalline Mg
-
Tanks J., Tamura K., Naito K., Nge T.T., Yamada T.
Durable and recyclable biomimetic glycol lignin/polyolefin compounds for a circular economy
-
Tobata Y., Naito K., Tanks J.
Mode Ⅰ–Governed fracture energy and maximum normal traction of a CFRP rod
-
Wakeda M., Saida J.
Unusual energy–structure–property relation in a metallic glass coupled with temperature-dependent relaxation memories
-
Singh A., Somekawa H., Hiroto T., Ode M., Tesař K., Čech J., Hara T.
Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg–Zn–Al alloy: Microstructure and mechanical properties
-
Gutierrez-Urrutia I., Shibata A.
Effect of deformation temperature on strain localization phenomena in an austenitic Fe-30Mn-6.5Al-0.3C low-density steel
-
Singh D., Singh A., Sawaguchi T.
Elucidating deformation pathways and interface characteristic of self-accommodated dual γ/ε phase microstructure in Fe–Mn–Si–Al alloy
-
Chandiran E., Ogawa Y., Ueji R., Singh A., Somekawa H., Ohmura T.
Activation of non type dislocation in near -oriented Mg by Sc addition
-
Li Z.H., Sasaki T.T., Ueji R., Kimura Y., Shibata A., Ohkubo T., Hono K.
Role of deformation on the hydrogen trapping in the pearlitic steel
-
Moriyama J., Takakuwa O., Yamaguchi M., Ogawa Y., Tsuzaki K.
The contribution of Cr and Ni to hydrogen absorption energy in Fe-Cr-Ni austenitic systems: A first-principles study
-
Shimoda K., Colin C.
Evaluation of heat resistance of SiC-based ceramic fibers via in situ elastic modulus and electrical conductivity measurement at elevated temperatures