Wada, K., Shibata, C., Enoki, H., Iijima, T., Yamabe, J.
Hydrogen-induced intergranular cracking of pure nickel under various strain rates and temperatures in gaseous hydrogen environment
研究Research
論文 2023
-
-
Tsutsumi, Y., Tsutsumi, H., Manaka, T., Chen, P., Ashida, M., Katayama, H., Hanawa, T.
Development of a Surface Treatment to Achieve Long-Lasting Antimicrobial Properties and Non-Cytotoxicity through Simultaneous Incorporation of Ag and Zn via Two-Step Micro-Arc Oxidation
-
Takata, Y., Sugiyama, T., Yuyama, M., Uzuhashi, J., Ohkubo, T., Harada, H., Suzuki, S., Kawagishi, K.
Influence of the Impurity Element Sb on Oxidation Resistance and Creep Strength of the Ni–Base Single Crystal Superalloy TMS–238 [Ni 基単結晶超合金 TMS–238 の耐酸化性とクリープ強度に及ぼす不純物元素 Sbの影響]
-
Takakuwa, O., Ogawa, Y., Miyata, R.
Antagonistic fatigue crack acceleration/deceleration phenomena in Ni-based superalloy 718 under hydrogen-supply
-
Somekawa, H., Nishikawa, K., Moronaga, T., Ohmura, T.
Fabrication of Li anode metal via bulk mechanical property analysis
-
Somekawa, H., Yuasa, M.
Induced kink boundary in Mg-Y-Zn alloy by tube-shape forming
-
Naito K., Seki Y., Inoue R.
Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies
-
Kadowaki, M., Katayama, H., Yamamoto, M.
Corrosion behavior of AA6016/SM490 galvanic couple in NaCl-containing droplets: Effect of Fe species on galvanic corrosion acceleration
-
Jodi, D.E., Kitashima, T., Watanabe, M.
Effect of scan strategy on the formation of a pure nickel single-crystal structure using a flat-top laser beam via laser powder bed fusion
-
Hiromoto, S., Doi, K.
Formation of Composite Coatings of Layered Double Hydroxide Particles and Hydroxide Gel by Electrophoretic Deposition on Mg Alloy and Corrosion Resistance
-
Chen, T., Koyama, M., Ogawa, Y., Matsunaga, H., Akiyama, E.
Martensite Boundary Characteristics on Cycle- and Time-Dependent Fatigue Crack Growth Paths of Tempered Lath Martensitic Steels in a 90 MPa Gaseous Hydrogen Atmosphere
-
Shibata, A., Gutierrez-Urrutia, I., Nakamura, A., Okada, K., Miyamoto, G., Madi, Y., Besson, J., Hara, T., Tsuzaki, K.
Three-dimensional propagation behavior of hydrogen-related intergranular cracks in high-strength martensitic steel
-
Rahman, M., Maeda, T., Osada, T., Ozaki, S.
Method of Determining Kinetic Parameters of Strength Recovery in Self-Healing Ceramic Composites
-
Okada, K., Shibata, A., Tsuji, N.
Characteristics and formation mechanism of serrated markings on the hydrogen-related quasi-cleavage fracture in as quenched low-carbon martensitic steel
-
Ogawa Y., Takakuwa O., Tsuzaki K.
Solid-solution hardening by hydrogen in Fe–Cr–Ni-based austenitic steel: Temperature and strain rate effects
-
Inoue, T., Hara, Y., Nakazato, K.
Mechanical Resistance and Tissue Structure of Claw Denticles of Various Sizes in the Mud Crab, Scylla serrata
-
Hatakeyama, T., Sekido, K., Sawada, K.
Prediction of Graphitization Behavior during Long-Term Creep in Carbon Steels
-
Doi, K., Hiromoto, S.
Rapid Formation of Calcium Hydroxy Zincate on Zinc by Hyperbaric-Oxygen
-
Ohmura T., Wakeda M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 2: Strengthening Mechanisms by Various Lattice Defects [微小領域の力学挙動解析と塑性現象のモデリング— 第2報 多様な格子欠陥による強化機構の考察 —]
-
Nishimura N., Masaki K., Tan W., Iimura R., Kobayashi H., Nishikawa K., Mandai T., Somekawa H., Tominaga Y.
Spray-Dried MgMn2O4 Spinel Oxide Cathode with Single Mg Ion-Conductive Polymers for Rechargeable Mg Metal Battery
-
Morishita, K., Yamaguchi, T., Wada, K., Yamabe, J.
Technique for Introducing Internal Defects with Arbitrary Sizes and Locations in Metals via Additive Manufacturing and Evaluation of Fatigue Properties
-
Kadowaki, M., Katayama, H.
Corrosion behavior of pure Al under Fe rust deposition: Decrease in the corrosion resistance of Al caused by γ-FeOOH
-
Jiang, B., Doi, K., Tsuchiya, K.
The Constituent Phases and Micromechanical Properties of Steel Corrosion Layers Generated by Hyperbaric-Oxygen Accelerated Corrosion Test
-
Gutierrez-Urrutia, I., Shibata, A.
Influence of microscope settings on dislocation imaging in transmission forescattered electron imaging (t-FSEI)
-
Chandiran, E., Ogawa, Y., Ueji, R., Singh, A., Somekawa, H.
Enhancement of damping capacity by deformation-induced martensitic transformation in Mg–Sc alloy
-
Wakai, F., Okuma, G., Mücke, R., Guillon, O.
Corrigendum to “Modelling of elimination of strength-limiting defects by pressure-assisted sintering at low stress levels” [J. Eur. Ceram. Soc. 41 (2021) 202–210, (S095522192100683X), (10.1016/j.jeurceramsoc.2021.09.040)]
-
Ueji, R., Gong, W., Harjo, S., Kawasaki, T., Shibata, A., Kimura, Y., Inoue, T., Tsuchida, N.
Deformation-Induced Martensitic Transformation at Tensile and Compressive Deformations of High-Carbon Bainitic Steel
-
Ogawa Y., Iwata K.
Fatigue Crack Propagation in Pearlitic Steel under Pressurized Gaseous Hydrogen: Influences of Microstructure Size and Strength Level
-
Nandal V., Dieb S., Bulgarevich D. S., Osada T., Koyama T., Minamoto S., Demura M.
Artificial intelligence inspired design of non-isothermal aging for γ–γ′ two-phase, Ni–Al alloys
-
Naito K.
Effect of the number of filaments on the tensile properties of polyacrylonitrile- and pitch-based carbon fiber epoxy-impregnated bundle composites
-
Morishita, M., Abe, T., Ohkubo, T., Tadano, T., Yamamoto, H., Nozaki, A., Miyazaki, H.
Magnetic characterization of Sm(Fe1-x, Cox)11Ti (x = 0, 0.1) determined by heat-capacity measurement from very low to high temperatures
-
Hatakeyama, T., Sawada, K., Sekido, K., Kimura, K.
Beneficial role of the grain boundary precipitates for intergranular creep fracture of 25Cr–20Ni–Nb–N steel
-
Han, K., Sahara, R., Abe, T., Oikawa, K., Ueshima, N., Ohnuma, I.
Phase equilibria of the Co-Cr-Mn ternary system at 700℃
-
Wakeda, M., Osada, T., Ohmura, T.
Atomistic analysis of temperature-dependent dislocation dynamics in Ni3Al-based intermetallic alloys
-
Tsuchiya, H., Yamada, N., Miyabe, S., Doi, K., Fujimoto, S.
Improved corrosion fatigue performance of 316L stainless steel by surface porosification
-
Tozman P., Sepehri-Amin H., Abe T., Hono K., Takahashi Y.K.
Exploring secondary phases in the Sm–Fe–V system beneficial for coercivity.
-
Ozeki, G., Yokobori, T.A., Jr., Tabuchi, M., Hayakawa, M., Nikbin, K.
Testing and Estimation Methods of Crack Growth Life for Alloy 617 under Strain-Controlled Creep-Fatigue Conditions Using Circular Sharp Notched Round Bar Specimen
-
Ogino Y., Nomura K., Komen H., Kitano H., Tanaka M.
Recent Progresses and Future Prospects of Science and Technology in Welding Process [溶接法研究委員会 －新溶接アーク現象のその先へ－]
-
Katagiri, J., Kusano, M., Nomoto, S., Watanabe, M.
Influence of recoil pressure, mushy zone flow resistance and reflectivity on melt pool shape in laser powder bed fusion simulation
-
Guo, S., Okuma, G., Naito, K., Kakisawa, H.
Mechanical properties of hot-pressed VB2–SiC composites with and without WC
-
Wakeda M., Ichitsubo T.
Atomistic study of liquid fragility and spatial heterogeneity of glassy solids in model binary alloys
-
Tabata C., Osada T., Yokokawa T., Ikeda A., Kawagishi K., Suzuki S.
Effect of Solution Heat-Treatment on the Oxidation Resistance of Ni-Base Single-Crystal Superalloy
-
Singh D., Tasaki W., Yoshinaka F., Takamori S., Emura S., Tsuchiya K., Sawaguchi T.
Unveiling the transformation pathways of hierarchical γ90 – εtwin – α’ triple phase structure formation at ε-ε martensite intersection
-
Okuma G.
3D microstructural evolution in sintering observed by X-ray microtomography
-
Katsui H., Shimoda K., Hotta M.
Preparation of silicon carbide and tantalum carbonitride composite with high hardness and moderate elastic modulus by laser chemical vapor deposition for anti-erosion protective coatings
-
Kitahara H., Ishii K., Talara M., Furuya T., Escano M.C., Tani M., Bulgarevich D.S., He D., Watanabe M.
Improvement in the Detection Efficiency of Terahertz (THz) Time-domain Spectroscopy (TDS) by applying an Alternating Magnetic Field Bias in Spintronic Emitter
-
Zhu J., Briffod F., Shiraiwa T., Enoki M., Emura S.
High-Resolution Digital Image Correlation Analysis of Layered α/β Two-Phase Ti–12Mo Alloy under Compressive Condition
-
Inoue T., Hara Y., Nakazato K.
Mechanical Resistance of the Largest Denticle on the Movable Claw of the Mud Crab
-
Nagira T., Nakamura T., Sawaguchi T., Mori M., Morisada Y., Fujii H.
Friction Stir Welding of Fe-15Mn-10Cr-8Ni-4Si Seismic Damping Alloy
-
Yoshinaka F., Nagashima N., Sawaguchi T.
Effect of Strain Rate on the Extremely Low-Cycle Fatigue of Fe-15Mn-10Cr-8Ni-4Si Bidirectional-TRIP Steel [Fe-15Mn-10Cr-8Ni-4Si bidirectional-TRIP 鋼の極低サイクル疲労に及ぼすひずみ速度の影響]
-
Abe R., Takahashi Y., Watanabe Y., Okuma G., Wakai F.
Coarsening of metal/ceramics bicontinuous structures enhanced by stress-induced instability under cyclic thermal stress
-
Abe T., Han K., Goto Y., Ohnuma I., Koyama T.
Stabilization of Equiatomic Solutions Due to High-Entropy Effect
-
Ajito S., Hojo T., Koyama M., Hiromoto S., Akiyama E.
Environment-assisted cracking of AZ31 magnesium alloy in a borate buffer solution containing ammonium thiocyanate under various potentials
-
Álvarez G., Harris Z., Wada K., Rodríguez C., Martínez-Pañeda E.
Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: Influence of post-processing, printing direction, temperature and pre-straining
-
Anetai H., Matsushita Y., Ohmura T., Takeuchi M.
Mechanically Flexible Crystals of Benzene Derivatives with Halogen or Methyl Groups
-
Banoth S., Palleda T.N., Saito T., Murakami H., Kakehi K.
Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion
-
Battulga B., Shiizaki K., Miura Y., Osanai Y., Yamazaki R., Shinohara Y., Kubota Y., Hara T., Kuro-o M., Ohno N.
Correlative light and electron microscopic observation of calcium phosphate particles in a mouse kidney formed under a high-phosphate diet
-
Bulgarevich D.S., Nomoto S., Watanabe M., Demura M.
Crystal plasticity simulations with representative volume element of as-build laser powder bed fusion materials
-
Chandiran E., Ogawa Y., Ueji R., Somekawa H.
An inverse Hall-Petch relationship during room-temperature compression of commercially pure magnesium
-
Chung T.-F., Lin S.-Q., Li H., Hsiao C.-N., Yang J.-R., Tsao C.-S., Ohmura T.
Microstructure evolution and shearing behaviour of δꞌ/θꞌ/δꞌ precipitates in an aged Al-Cu-Li-Mg aluminium alloy
-
Cui D., Sciazko A., Komatsu Y., Nakamura A., Hara T., Wu S., Xiao R., Shikazono N.
Three dimensional microstructures of carbon deposition on Ni-YSZ anodes under polarization
-
Daram P., Hiroto T., Watanabe M.
Microstructure and phase evolution of functionally graded multi-materials of Ni–Ti alloy fabricated by laser powder bed fusion process
-
Deffrennes G., Terayama K., Abe T., Ogamino E., Tamura R.
A framework to predict binary liquidus by combining machine learning and CALPHAD assessments
-
Enoki M., Minamoto S., Ohnuma I., Abe T., Ohtani H.
Current Status and Future Scope of Phase Diagram Studies
-
Enomoto S., Kou S., Abe T., Gohda Y.
Subphase exploration for SmFe12-based permanent magnets by Gibbs energies obtained with first-principles cluster-expansion method
-
Furuya Y., Nishikawa H., Hirukawa H., Nagashima N., Takeuchi E.
Gigacycle Fatigue Properties of Wrought Aluminum Alloys
-
Gholizadeh R., Yoshida S., Bai Y., Kurokawa S., Shibata A., Tsuji N.
Global understanding of deformation behavior in CoCrFeMnNi high entropy alloy under high-strain torsion deformation at a wide range of elevated temperatures
-
Gong W., Harjo S., Tomota Y., Morooka S., Kawasaki T., Shibata A., Tsuji N.
Lattice parameters of austenite and martensite during transformation for Fe–18Ni alloy investigated through in-situ neutron diffraction
-
Guo B., Mao W., Chong Y., Shibata A., Harjo S., Gong W., Chen H., Jonas J.J., Tsuji N.
Unexpected dynamic transformation from α phase to β phase in zirconium alloy revealed by in-situ neutron diffraction during high temperature deformation
-
Guo S., Okuma G., Naito K., Kakisawa H.
Mechanical behaviors of hot-pressed 4TaC–1ZrC ceramics with and without Y2O3 and La2O3 additives
-
Guo W., Niiyama T., Yamada R., Wakeda M., Saida J.
Synthesis and mechanical properties of highly structure-controlled Zr-based metallic glasses by thermal rejuvenation technique
-
Hagiwara M., Kitashima T.
High Cycle Fatigue and Very High Cycle Fatigue of Orthorhombic (O + α2)-Type Ti–27.5Nb–13Al Alloy with and without B and Fatigue Striation Analysis in Comparison with (α + β)-Type Titanium Alloys
-
Han W., Wu M., Rong J., Zhang S., Zhang X., Zhao T., Yu X., Naito K., Zhang Q.
Effect of functionalized nanodiamond on properties of polylactic acid eco-friendly composite films
-
Hara T.
Techniques and Applications of FIB-SEM Serial Sectioning Observation [集束イオンビームを利用した SEM シリアルセクショニングの観察技法と応用]
-
Hashimoto M., Takahashi H., Tabata-Okubo K., Nagaoka N., Tokunaga K., Matsumori H., Ishihara Y., Kaku M., Iimura T., Hara T., Kamioka H.
Bundling of collagen fibrils influences osteocyte network formation during bone modeling
-
Hatakeyama T., Sawada K., Suzuki M., Watanabe M.
Microstructure development of modified 9Cr-1Mo steel during laser powder bed fusion and heat treatment
-
Hirai Y., Van Baaren S., Ohmura T., Nakanishi T., Takeda T., Kitagawa Y., Hasegawa Y., Métivier R., Allain C.
Bright LanthanideIII Triboluminescence despite Low Photoluminescence, and Dual Triboluminescence and Mechano-Responsive Photoluminescence
-
Hiromoto S., Doi K.
Effect of polyethylene glycol modification on the corrosion behavior of hydroxyapatite-coated AZ31 Mg alloy under tensile deformation
-
Hiromoto S., Fukuzawa K., Doi K., Chiba M., Ohtsu N.
Corrosion Protection Behavior of Aluminate Ion-Loaded Layered Double Hydroxide Coating on AZ31 Magnesium Alloy
-
Huang W., Wang Q., Ma N., Kitano H.
Characteristics of residual stress distribution in wire-arc additive manufactured layers of low transformation temperature material
-
Hwang S., Myeong-Heom P., Bai Y., Shibata A., Adachi H., Sato M., Tsuji N.
The Effect of Serration Behavior on Strain Hardening and Deformation in 22Mn-0.6C Steel
-
Imai M., Han K., Nishio M., Kato T., Kawada S., Emura S., Abe T., Fujihisa H.
Sr–Si diagram at Si contents of 55–100 at% and crystal structure of SrSi2-x
-
Inoue T., Hiroto T., Hara Y., Nakazato K., Oka S.-I.
Tissue structure and mechanical properties of the exoskeleton of the huge claws of the mud crab, Scylla serrata
-
Ishikawa T., Sahara R., Ohno K., Ueda K., Narushima T.
Electronic structure analysis of light-element-doped anatase TiO2">2 using all-electron GW approach
-
Iwamoto S., Kondo S., Katsui H., Shimoda K., Yu H., Ogino Y., Kasada R.
Evaluation of equi-biaxial strength of thin sic coatings using ring-on-ring testing and digital image correlation
-
Jiang B., Doi K., Tsuchiya K.
Characterization of microstructures and micromechanical properties of naturally generated rust layer in 60-year old reinforced concrete
-
Jiang B., Men D., Emura S., Tsuchiya K.
Microstructural response and mechanical properties of α-precipitated Ti–5Al–5Mo–5V–3Cr alloy processed by high-pressure torsion
-
Jodi D.E., Kitashima T., Singh A., Watanabe M.
High-temperature microstructural stability of pure Ni fabricated by laser powder bed fusion using Gaussian and flat-top beam profiles
-
Kadowaki M., Katayama H., Yamamoto M.
Galvanic current analysis of AA6016/SM490 couple using experimental and numerical simulation data in various NaCl solutions
-
Kanazawa T., Hayakawa M., Vinas D., Tahara Y., Hata N., Yoshimoto M.
Sustainable technology for remanufacturing of carburized steels by laser hardening
-
Katagiri J., Kusano M., Minamoto S., Kitano H., Daimaru K., Tsujii M., Watanabe M.
Melt Pool Shape Evaluation by Single-Track Experiments and Finite-Element Thermal Analysis: Balling and Lack of Fusion Criteria for Generating Process Window of Inconel738LC
-
Kim S.-H., Osada T., Matsushita Y., Hiroto T., Fisher C.A.J., Jang B.-K.
CMAS corrosion behavior of dual-phase composite Gd2Si2O7/Sc2Si2O7 as a promising EBC material
-
Kuramoto S., Kawano Y., Mori Y., Kobayashi J., Emura S., Sawaguchi T.
Mechanical Properties and Deformation Behavior in Severely Cold-Rolled FeNiAlC Alloys with Lüders Deformation -Overview with Recent Experimental Results-
-
Kuroda T., Masuyama H., Toda Y., Matsunaga T., Ito T., Watanabe M., Ozasa R., Ishimoto T., Nakano T., Shimojo M., Yamabe-Mitarai Y.
Microstructure Evolution and High-Temperature Mechanical Properties of Ti6Al4Nb4Zr Fabricated by Selective Laser Melting
-
Lee J.-L., Wang P.-T., Lo K.-C., Shen P.-K., Tsou N.-T., Kakehi K., Murakami H., Tsai C.-W., Gorsse S., Yeh A.-C.
Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy
-
Li X., Jin L., Mao H., Murakami H., Guo S.
Solid solution softening or hardening induced by minor substitutional additions in a Hf20Nb31Ta31Ti18 refractory high entropy alloy
-
Louis Etienne M., Stéphane G., Guillaume L., Hideyuki M.
Microstructure and oxidation behavior of Co–Cr–Ta ternary alloys
-
Machida S., Okuma G., Arai Y., Takeuchi A., Uesugi M., Katsumata K.-I., Yasumori A.
A three-dimensional image reflecting the dispersion state of ceramic platelets in solvent: Observation of montmorillonite dispersed in silica gel by synchrotron X-ray multiscale tomography
-
Maeda K., Okuma G., Yoshida S., Wakai F., Takeuchi A., Uesugi M., Yanagioka S., Matsunuma S., Machida S., Yasumori A.
Indentation-induced ductile behavior of glass–ceramics involving layered aluminosilicates
-
Manaka T., Tsutsumi Y., Takada Y., Chen P., Ashida M., Doi K., Katayama H., Hanawa T.
Galvanic Corrosion among Ti6Al4V ELI Alloy, CoCrMo Alloy, 316L-Type Stainless Steel, and Zr1Mo Alloy for Orthopedic Implants
-
Mao W., Gao S., Gong W., Bai Y., Harjo S., Park M.-H., Shibata A., Tsuji N.
Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel
-
Wakeda M.
Atomistic Study on Microstructure Control and Deformation Behaviors of Metallic Glasses [金属ガラスにおける構造制御と変形挙動の原子論的研究]
-
Meng L., Kitashima T., Zhao Z., Wei Q., Lin P.
Effect of parent β-texture on α-texture evolution during dynamic precipitation in a continuous forging process of Ti-6Al-4V alloy
-
Mori Y., Kawano Y., Kobayashi J., Kuramoto S., Emura S., Sawaguchi T.
Effect of Stability of γ phase on Lüders-like Deformation Behavior of Cold-rolled Fe-Ni-Al-C Alloys [Fe-Ni-Al-C 系合金冷間圧延材のリューダース型変形挙動に及ぼすγ相安定性の影響]
-
Morishita M., Abe T., Yamamoto H., Nozaki A., Kimura S.
Thermodynamic and magnetic properties for Dy2Fe14B determined by heat capacity measurement from very low to high temperatures and solution calorimetry
-
Nagashima N., Yoshinaka F., Sawaguchi T.
Study on Extremely-Low-Cycle Fatigue of Fe15Mn10Cr8Ni4Si Alloy
-
Nagira T.
Recent Trend of FSW/FSP [FSW/FSP 研究の現状]
-
Nagira T., Nakamura T., Kimura T., Yoshinaka F., Sawaguchi T., Yamashita T., Aoki Y., Fujii H.
Elucidation of solidification mode of Fe-Mn-Si alloy during TIG spot welding using synchrotron X-ray
-
Naidu Palleda T., Banoth S., Tanaka M., Murakami H., Kakehi K.
The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 718
-
Naito K., Nakamura M., Matsuoka T.
Friction and wear properties of polyacrylonitrile- and pitch-based carbon fiber-reinforced polymer matrix composites containing silicon carbide nanoparticles
-
Nakamura Y., Hibi Y., Naito K., Yamamoto N., Hanamura M.
Chemical Structure Evaluations of Amine Hardeners to Ensure and Predict the Performance of Wet Adhesion of Epoxies
-
Nishikawa H., Furuya Y., Osada T., Kawagishi K., Hara T.
Three-dimensional high-resolution crystallographic observation of the entire volume of microstructurally small fatigue cracks in Ni-Co based superalloy
-
Nishikawa H., Habib K., Furuya Y., Hara T., Osada T., Kawagishi K.
Short fatigue crack growth mechanism in Ni-Co based superalloy at elevated temperatures and in oxidative atmospheres
-
Ogawa Y., Naito K., Harada K., Oguma H.
Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading
-
Ohmura T., Wakeda M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 1: Dislocation–Grain Boundary Interaction as a Strengthening Factor [微小領域の力学挙動解析と塑性現象のモデリング— 第 1 報 転位—粒界相互作用の考察 —]
-
Ohno K., Kuwahara R., Sahara R., Pham T.N., Bhattacharyya S., Kawazoe Y., Fujisaki K.
Microstructures in Iron-rich FeSi Alloys by First-principles Phase Field and Special Quasirandom Structure Methods
-
Ohtani T., Ishii Y., Tabuchi M., Hongo H., Sawada K.
Creep-induced nonlinear acoustic characterizations and microstructural change in an austenitic stainless steel
-
Okada K., Shibata A., Sasaki T., Matsumiya H., Hono K., Tsuji N.
Improvement of resistance against hydrogen embrittlement by controlling carbon segregation at prior austenite grain boundary in 3Mn-0.2C martensitic steels
-
Okuma G., Endo M., Minagawa H., Inoue R., Kakisawa H., Kohata T., Osada T., Yamamoto T., Azuma M., Takeuchi A., Uesugi M., Guillon O., Wakai F.
3D Visualization of Morphological Evolution of Large Defects during Spark Plasma Sintering of Alumina Granules
-
Okuma G., Osada T., Minagawa H., Arai Y., Inoue R., Kakisawa H., Shimoda K., Takeuchi A., Uesugi M., Tanaka S., Wakai F.
Heterogeneities and defects in powder compacts and sintered alumina bodies visualized by using the synchrotron X-ray CT
-
Osada T., Koyama T., Bulgarevich D.S., Minamoto S., Osawa M., Watanabe M., Kawagishi K., Demura M.
Virtual heat treatment for γ-γ′ two-phase Ni-Al alloy on the materials Integration system, MInt
-
Paul V., Ameyama K., Ota-Kawabata M., Ohmura T.
Evaluation of Deformation and Fracture Behavior in 304L Austenitic Steel Harmonic Structures through Nanoindentation
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Probing pre-serration deformation in Zr-based bulk metallic glass via nanoindentation testing
-
Qiu H., Inoue T.
Evolution of Poisson’s Ratio in the Tension Process of Low-Carbon Hot-Rolled Steel with Discontinuous Yielding
-
Qiu H., Ueji R., Inoue T.
Yield-Point Phenomenon and Plastic Bands in Ferrite–Pearlite Steels
-
Sawaguchi T., Tomota Y., Yoshinaka F., Harjo S.
Evidence supporting reversible martensitic transformation under cyclic loading on Fe–Mn–Si–Al alloys using in situ neutron diffraction
-
Sciazko A., Komatsu Y., Nakamura A., Ouyang Z., Hara T., Shikazono N.
3D microstructures of solid oxide fuel cell Ni-YSZ anodes with carbon deposition
-
Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T., Tsuzaki K.
Substructure and crystallography of lath martensite in as-quenched interstitial-free steel and low-carbon steel
-
Shimoda K., Hinoki T.
Effect of BN nanoparticle content in SiC matrix on microstructure and mechanical properties of SiC/SiC composites
-
Shimoda K., Kakisawa H.
Novel production route for SiC/SiC ceramic-matrix composites using sandwich prepreg sheets
-
Somekawa H., Motohashi N., Kuroda S., Mandai T.
Mechanical and functional properties of ultra-thin Mg foils
-
Somekawa H., Naito K.
Grain boundary plasticity at intermediate temperatures in fine-grained Mg-Mn ternary alloys
-
Suvitha A., Venkataramanan N.S., Sahara R.
The structure, stability, thermochemistry, and bonding in SO3-(H2O)n (n = 1–7) clusters: a computational analysis
-
Suzuki I., Abe T., Sepehri-Amin H., Hono K., Takahashi Y.K.
Microstructure evolution in FePt-Cr2O3 granular thin films
-
Tabata C., Kawagishi K., Yokokawa T., Uzuhashi J., Ohkubo T., Harada H., Suzuki S.
Effect of Ca Addition on the Oxidation Resistance of Ni–Al Alloy
-
Talara M., Bulgarevich D.S., Kobayashi K., Kitahara H., Furuya T., Escano M.C., Watanabe M., Tani M.
Impact of Antenna Metal's Thicknesses and Structures on Terahertz (THz) Wave Generation Performance of Spintronic Emitters
-
Tanks J., Hiroi T., Tamura K., Naito K.
Tethering Organic Disulfides to Layered Silicates: A Versatile Strategy for Photo-Controllable Dynamic Chemistry and Functionalization
-
Tanks J., Naito K., Tamura K.
Rigid epoxy networks with very high intrinsic fracture toughness using a piperazine-based in-situ polymerization strategy
-
Tanks J., Tamura K., Naito K., Nge T.T., Yamada T.
Glycol lignin/MAH-g-PP blends and composites with exceptional mechanical properties for automotive applications
-
Teramoto T., Kitasumi K., Shimohara R., Ito Y., Shimizu R., Tanaka K., Ueji R.
Formation condition and effect on the early stages of plastic deformation of chemical short-range order in Cr-Co-Ni medium-entropy alloy
-
Tobata Y., Naito K., Tanks J.
Direct measurement and verification of cohesive zone model parameters for basalt/PP rods using the transverse tensile test and virtual double cantilever beam test
-
Trang L.T., Le H.V., Hiromoto S., Minho O., Kobayashi E., Nguyen N.V., Cao N.Q.
In vitro cellular biocompatibility and in vivo degradation behavior of calcium phosphate-coated ZK60 magnesium alloy
-
Tsuchida N., Ueji R., Gong W., Kawasaki T., Harjo S.
Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels
-
Tsuchiyama T., Tsugumi K., Ma T., Masumura T., Ono Y.
Nitrogen-Enhanced Temperature Dependence of Grain Refinement Strengthening in Austenitic Stainless Steel
-
Ueji R., Nagata K., Somekawa H., Demura M.
Application of a sparse mixed regression method to design the optimal composition and heat treatment conditions for transformation-induced plasticity steel with high strength and large elongation
-
Usukawa R., Katsui H., Shimoda K., Kondo S., Hotta M.
Microstructure and integrity of multilayer ceramic coating with alumina top coat on silicon carbide by laser chemical vapor deposition
-
Venkataramanan N.S., Suvitha A., Sahara R., Kawazoe Y.
Unveiling the gemcitabine drug complexation with cucurbit[n]urils (n = 6–8): a computational analysis
-
Wada K., Shibata C., Yamabe J.
Synergistic Effect of Hydrogen and Sulfur on Ductility Loss in Pure Nickel Accompanied by Hydrogen-Induced Intergranular Fracture [水素助長粒界破壊を伴う純ニッケルの延性低下における水素と硫黄の相乗的役割]
-
Wakeda M., Ohmura T.
Atomistic evaluation of the dislocation transmission across tilt and twist low-angle grain boundaries in body-centered cubic iron
-
Wakeda M., Saida J.
Temperature-dependent effect of cooling rate on the melt-quenching process of metallic glasses
-
Wang Q., Ma N., Chen J., Tomitaka S., Watanabe M.
Microstructure characteristics of warm spray additively manufactured Inconel 718 superalloys and correlation with mechanical performance
-
Wang Q., Ma N., Huang W., Shi J., Luo X.-T., Tomitaka S., Morooka S., Watanabe M.
Key role of temperature on delamination in solid-state additive manufacturing via supersonic impact
-
Wang Y., Tomota Y., Ohmura T., Gong W., Harjo S.
Evolution of austenite lattice parameter during isothermal transformation in a 0.4 C low alloyed steel
-
Wu C.-Y., Lei C.-M., Wu R.T., Wang S.-H., Shih J.-S., Chang H.-Y.
Crystallization and activator reduction simultaneously for calcium sulfide nanophosphors and evaluation of red-light compensation - Environmental reliability
-
Wu L., Osada T., Yokokawa T., Chang Y., Kawagishi K.
The temperature dependence of strengthening mechanisms in Ni-based superalloys: A newly re-defined cuboidal model and its implications for strength design
-
Wu Z., Nagira T., Ushioda K., Miyamoto G., Fujii H.
Microstructures and Tensile Properties of Friction Stir Welded 0.2%C-2%Si-Cr Steels
-
Xue G., Nakamura T., Fujimura N., Takahashi K., Oguma H., Takeuchi A., Uesugi M., Uesugi K.
Full-life growth behavior of a naturally initiated internal fatigue crack in beta titanium alloy via in situ synchrotron radiation multiscale tomography
-
Yagi Y., Konno R., Hayashi T., Tanaka K., Yamasaki N.Y., Mitsuda K., Sato R., Saito M., Homma T., Nishida Y., Mori S., Iyomoto N., Hara T.
Performance of TES X-Ray Microcalorimeters Designed for 14.4-keV Solar Axion Search
-
Yamagishi K., Ogawa Y., Ando D., Sutou Y.
Adjustable room temperature deformation behavior of Mg–Sc alloy: From superelasticity to slip deformation via TRIP effect
-
Yamagishi K., Ogawa Y., Ando D., Sutou Y.
Development of Mg-Based Superelastic Alloy Through Aging Heat Treatment
-
Yamagishi K., Onyam K., Ogawa Y., Ando D., Sutou Y.
Abnormal grain growth through cyclic heat treatment in a Mg–Sc alloy
-
Yamagishi K., Takeuchi Y., Ogawa Y., Ando D., Sutou Y.
B2 Ordering and Its Effect on Room Temperature Superelasticity in Mg–Sc Alloy
-
Yamaguchi N., Osada T., Kuo Y.-L., Nanko M.
Influence of cutting damage on the bending strength of Ti2AlC MAX phase machinable ceramics
-
Yen S.-Y., Murakami H., Lin S.-K.
Low-density CoAlTi-B2 strengthened Al-Co-Cr-Mo-Ti bcc refractory high-entropy superalloy designed with the assistance of high-throughput CALPHAD method
-
Yokokawa T., Osada T., Tabata C., Kohata T., Takata Y., Yuyama M., Kawagishi K.
Effect of Solution Heat Treatment on Dendritic Segregation and Creep Strength of Ni–Base Single Crystal Superalloy TMS–238 [Ni 基単結晶超合金 TMS–238 のデンドライト偏析とクリープ強度におよぼす溶体化熱処理の影響]
-
Yoshinaka F., Nakamura T., Oguma H., Fujimura N., Takeuchi A., Uesugi M., Uesugi K.
Characterization of internal fatigue crack initiation in Ti-6Al-4V alloy via synchrotron radiation X-ray computed tomography
-
Yoshinaka F., Sawaguchi T., Takamori S., Emura S., Inoue Y.
Two-fold improvement of low cycle fatigue resistance of steel by bidirectional transformation-induced plasticity
-
Yuasa M., Sato R., Hoshino T., Ando D., Todaka Y., Miyamoto H., Somekawa H.
Microstructure Evolution and Local Hardness of Mg-Y-Zn Alloys Processed by ECAE
-
Zhang S., Wu M., Rong J., Zhang X., Han W., Zhao T., Chen X., Naito K., Yu X., Zhang Q.
Synthesis and Characterization of Pyrimidine-Based Novel Phthalonitrile Resins with Excellent Processing Performance and High Glass Transition Temperature
-
Zhu J., Briffod F., Shiraiwa T., Enoki M., Emura S.
Kink band formation mechanism in α/β Ti-9Cr two-phase alloy
-
Tsuchida N., Ueji R., Gong W., Kawasaki T., Harjo S.
Effects of Pre-Strain and Tempering on Mechanical Properties in High-Strength Martensitic Steels
-
Hiroshi Mizuseki, Ryoji Sahara, Kenta Hongo
Order–disorder competition in equiatomic 3d–transition–metal quaternary alloys: phase stability and electronic structure
-
Yoshiyuki Furuya, Hideaki Nishikawa, Hisashi Hirukawa, Nobuo Nagashima, Etsuo Takeuchi
NIMS fatigue data sheet on low- and high-cycle fatigue properties of A2017-T4 (Al-4.0Cu-0.6Mg) aluminium alloy
-
Yoshiyuki Furuya, Hideaki Nishikawa, Hisashi Hirukawa, Nobuo Nagashima, Etsuo Takeuchi
Fatigue properties of titanium alloys disclosed in NIMS fatigue data sheets