Briffod F., Edwards T.E.J., da Fonseca J.Q., Stinville J.C., Texier D., Vermeij T.
Understanding strain localization in metallic materials: a review of high-resolution digital image correlation and related techniques
強度物性グループMechanical Properties Group
論文リスト
2026
-
-
Muro K., Watanabe Y., Cheng C.-H., Kajitani T., Samitsu S., Ohmura T., Sugiyasu K.
Cholesterol-Based Molecular Glasses: Attempts to Control Their Thermal Stability and Mechanical Properties
-
Ida S., Nakagawa E., Tropper F., Ohmura T., Yoshimi K.
Enhanced deformability of TiC induced by off-stoichiometry
-
Muraleedharan A., Acharyya A., Ohmura T., Acharyya S.G.
Enhanced Piezoelectric and Mechanical Performance of Flexible ZnO Nanorod/PVDF Composite Sensors: From Nanoscale Mapping to Macroscopic Durability
-
Jansen H.C., Sharma A., Hans M., Schneider J.M., Schwiedrzik J., Michler J., Edwards T.E.J.
Nanolaminated Al100−zNiz / AlOxHy thin films by hybrid PVD / ALD: An approach towards interface-engineered thin films by dual-route tailoring
-
Liao H., Wakeda M., Shibata A., Ohmura T.
First-principles study of hydrogen segregation in ɛ-, η-, and θ-carbides in bcc-Fe: Effects of elastic strain and local charge density
2025
-
Asano M., Osada T., Ikeda A., Abe T., Hoefler T., Nakagawa E., Ohmura T.
High-throughput evaluation of hardness dependence on composition and temperature in Ni–Co binary alloy systems
-
Byloff J., Devulapalli V., Casari D., Edwards T.E.J., Trost C.O.W., Cordill M.J., Altaf Husain S., Renault P.-O., Faurie D., Putz B.
From Mechanics to Electronics: Influence of ALD Interlayers on the Multiaxial Electro-Mechanical Behavior of Metal–Oxide Bilayers
-
Byloff J., Trost C.O.W., Devulapalli V., Altaf Husain S., Faurie D., Renault P.-O., Edwards T.E.J., Cordill M.J., Casari D., Putz B.
Atomic Layer-Deposited Interlayers for Robust Metal-Polymer Interfaces
-
Byloff J., Trost C.O.W., Devulapalli V., Altaf Husain S., Faurie D., Renault P.-O., Edwards T.E.J., Cordill M.J., Casari D., Putz B.
Atomic Layer-Deposited Interlayers for Robust Metal–Polymer Interfaces
-
Hoefler T., Ikeda A., Osada T., Hara T., Kawagishi K., Ohmura T.
Automated system for high-throughput process-structure-property dataset generation of structural materials: A γ/γ′ superalloy case study
-
Ida S., Nakagawa E., Paul V., Ohmura T., Yoshimi K.
Enhanced deformability of TiC in Mo-Ti-C ternary system by off-stoichiometry
-
Jansen H.C., Sharma A., Wieczerzak K., Nayak G.K., Schneider J.M., Schwiedrzik J., Edwards T.E.J., Michler J.
On the efficacy of Xe+-pFIB preparation to avoid Ga+-FIB induced phase transformations in Al-Ni alloys
-
Kato H., Horii Y., Watanabe C., Sasaki T., Ichiyanagi K., Noguchi M., Fujimori H., Yamamoto T., Suzuki H., Hirai Y., Ohmura T., Yano K., Hayashi S., Kajiwara T.
Molecular Thermal Engine Based on a Highly Flexible Elastic Crystal
-
Murata Y., Moronaga T., Egami M., Hayashi K., Nanba S., Hara T., Ohnuma I., Ohmura T.
Accurate measurement of solute profile segregated at steel grain boundary by scanning transmission electron microscope with energy dispersive X-ray spectroscopy
-
Pomes S., Suzuki T., Enokizono T., Adachi N., Wakeda M., Ohmura T.
Metallic glasses heterogeneous and time sensitive small-scale plasticity probed through nanoindentation and machine learning clustering
-
Somekawa H., Hara Y., Moronaga T., Singh A., Ohmura T.
In-situ TEM observation of -axis extension twin formation at grain boundaries
-
Tai C.-L., You J.-D., Chen J.-J., Liang S.-C., Chung T.-F., Yang Y.-L., Ii S., Ohmura T., Zheng X., Chen C.-Y., Yang J.-R.
In-situ transmission electron microscopy investigation of the deformation mechanism in CoCrNi and CoCrNiSi0.3 nanopillars
-
Tan X.F., Paul V., Ohmura T., McDonald S.D., Nogita K.
Nanoindentation Study of Phases in Near-Eutectic Sn-Bi Alloy
-
Tomota Y., Li H., Tsuchida N., Gong W., Harjo S., Ohmura T.
Grain size dependence of
intergranular lattice strain generated by plastic deformation in ferritic steel
2024
-
Chandiran E., Ogawa Y., Ueji R., Singh A., Somekawa H., Ohmura T.
Activation of non type dislocation in near -oriented Mg by Sc addition
-
Hirai Y., Wrona-Piotrowicz A., Zakrzewski J., Ciechańska M., Ohmura T., Takeda T., Nakanishi T., Métivier R., Allain C.
Mechanofluorochromism and self-recovery of alkylsilylpyrene-1-carboxamides
-
Ioroi K., Ohnuma I., Xu X., Kainuma R., Omori T.
Thermodynamic assessment of the Cr–Si binary system
-
Kura C., Wakeda M., Hayashi K., Ohmura T.
Atomistic study on effects of solute atoms on energy profile of edge dislocation mobility in FCC-Cu alloys
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Comparative analysis of nanoindentation-induced incipient deformation of zirconium-based bulk metallic glass in various structural states
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Temperature Dependence of Nanoindentation-Induced Deformation Dynamics in Zr-Based Bulk Metallic Glass
-
Sato Y., Shinzato S., Ohmura T., Hatano T., Yanagimoto J., Ogata S.
Molecular Dynamics Simulation on the Initiation of Plastic Deformation by Nanoindentation
-
Somekawa H., Nakagawa E., Hara Y., Moronaga T., Ogawa Y., Singh A., Ohmura T.
In-situ TEM observation of -axis extension twin nucleation in single crystalline Mg
-
Tabata C., Osada T., Ohmura T., Yokokawa T., Kawagishi K., Suzuki S.
Interfacial Strength Evaluation Between Sulfur-Segregated Al2O3 and Ni–Al Single Crystal Alloy Using Nanoindentation
-
Wakeda M.
Nanoscale Analyses of the Deformation and Mechanical Response near Grain boundary in Metals and Alloys
-
Wakeda M., Saida J.
Unusual energy–structure–property relation in a metallic glass coupled with temperature-dependent relaxation memories
2023
-
Anetai H., Matsushita Y., Ohmura T., Takeuchi M.
Mechanically Flexible Crystals of Benzene Derivatives with Halogen or Methyl Groups
-
Chung T.-F., Lin S.-Q., Li H., Hsiao C.-N., Yang J.-R., Tsao C.-S., Ohmura T.
Microstructure evolution and shearing behaviour of δꞌ/θꞌ/δꞌ precipitates in an aged Al-Cu-Li-Mg aluminium alloy
-
Guo W., Niiyama T., Yamada R., Wakeda M., Saida J.
Synthesis and mechanical properties of highly structure-controlled Zr-based metallic glasses by thermal rejuvenation technique
-
Hirai Y., Van Baaren S., Ohmura T., Nakanishi T., Takeda T., Kitagawa Y., Hasegawa Y., Métivier R., Allain C.
Bright LanthanideIII Triboluminescence despite Low Photoluminescence, and Dual Triboluminescence and Mechano-Responsive Photoluminescence
-
Wakeda M.
Atomistic Study on Microstructure Control and Deformation Behaviors of Metallic Glasses [金属ガラスにおける構造制御と変形挙動の原子論的研究]
-
Ohmura T., Wakeda M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 1: Dislocation–Grain Boundary Interaction as a Strengthening Factor [微小領域の力学挙動解析と塑性現象のモデリング— 第 1 報 転位—粒界相互作用の考察 —]
-
Ohmura T., Wakeda M.
Nano Mechanical Characterization and Physical Modeling of Plastic Deformation Chapter 2: Strengthening Mechanisms by Various Lattice Defects [微小領域の力学挙動解析と塑性現象のモデリング— 第2報 多様な格子欠陥による強化機構の考察 —]
-
Paul V., Ameyama K., Ota-Kawabata M., Ohmura T.
Evaluation of Deformation and Fracture Behavior in 304L Austenitic Steel Harmonic Structures through Nanoindentation
-
Pomes S., Adachi N., Wakeda M., Ohmura T.
Probing pre-serration deformation in Zr-based bulk metallic glass via nanoindentation testing
-
Somekawa, H., Nishikawa, K., Moronaga, T., Ohmura, T.
Fabrication of Li anode metal via bulk mechanical property analysis
-
Wakeda M., Ichitsubo T.
Atomistic study of liquid fragility and spatial heterogeneity of glassy solids in model binary alloys
-
Wakeda M., Ohmura T.
Atomistic evaluation of the dislocation transmission across tilt and twist low-angle grain boundaries in body-centered cubic iron
-
Wakeda M., Saida J.
Temperature-dependent effect of cooling rate on the melt-quenching process of metallic glasses
-
Wakeda, M., Osada, T., Ohmura, T.
Atomistic analysis of temperature-dependent dislocation dynamics in Ni3Al-based intermetallic alloys
-
Wang Y., Tomota Y., Ohmura T., Gong W., Harjo S.
Evolution of austenite lattice parameter during isothermal transformation in a 0.4 C low alloyed steel