日本語のページはこちら

Achivements

Publication
Presentation

Publication

    "2011"
  1. "Nanocrystalline Zr3Al Made through Amorphization by Repeated Cold Rolling and Followed by Crystallization"
    D. Geist, S. Ii, K. Tsuchiya, H. P. Karntheler, G. Stefanov and C. Rentenberger
    J. Alloys and Comp., Vol.509(2011), 1815-1818.
  2. "Grain boundary segregation in ultrafine grained Al alloys"
    S.Ii, K. Tsuchiya and N. Tsuji,
    Proceedings of International Symposium on Giant Straining Process for Advanced Materials (GSAM2010),
    edited by Zenji Horita, Kyushu University Press, Japan, 2011, p.96.

    3. "2010"
  3. "Microstructure of Bonding Interface in Explosively Welded Metal/Ceramic Clad"
    S. Ii, C. Iwamoto, S. Satonaka, K. Hokamoto and M. Fujita
    Materials Science Forum, Vols. 638-642(2010), 3775-3780.

    4. "2009"
  4. " Microstructural characterization of explosively welded rapidly solidified foil and stainless steel plate through the acceleration employing underwater shockwave"
    K. Hokamoto, K. Nakata, A. Mori, S. Ii, R. Tomoshige, S. Tsuda, T. Tsumura and A. Inoue
    J. of Alloys and Comp., Vol.485(2009), 817-821.
  5. "Micro and Atomic Structure of the interface in advanced materials fabricated by using high pressure with shock wave"
    S. Ii, R. Tomoshige, K. Hokamoto and M. Fujita
    Proceeding of MC2009, edited by W. Grogger, F. Hofer and R. Polt, TU Graz, Vol.3, 479-480.
  6. "Aging effect on martensitic transformation at cryogenic temperatures in Cu-Al-Mn alloy"
    S. Ii, K. Tsuchiya and T. Koyano
    Proceeding of ESOMAT 2009 - The 8th European Symposium on Martensitic Transformations, edited by P. Sittner, L. Heller and V. Paidar, EDP Sciences, France, 2009, 02011.

    7. "2008"
  7. "Crystallography and morphology of various interfaces in Ti-Ni, Ti-Pd and Ni-Mn-Ga shape memory alloys",
    M. Nishida, T. Hara, M. Matsuda and S. Ii,
    Mater. Sci. and Eng. A, 481-482(2008), 18-27.
  8. "Advanced materials synthesis by using explosive and microstructural characterization at Sojo University",
    S. Ii. A. Kira, R. Tomoshige and M. Fujita,
    Mater. Sci. Forum, 566(2008), 321-326.
  9. "Direct Evidence of Polycrystalline Silicon Thin Films Formation during Aluminum Induced Crystallization by In-situ Heating TEM Observation",
    S. Ii, T. Hirota, K. Fujimoto, Y. Sugimoto, N. Takata, K. Ikeda, H. Nakashima and H. Nakashima,
    Mater. Trans., 49(2008), 723-727.
  10. "AIC法による低温多結晶シリコン薄膜形成挙動の微細構造解析",
    池田賢一，廣田健，藤本健資，杉本洋平，高田尚記，井誠一郎，中島英治，中島寛，
    信学技報，　Vol.108(2008)，　NO.1， pp.95-100.
  11. "Grain boundary structures of ARB processed Aluminum"
    S. Ii, M. Hishida, N. Takata, K. Ikeda, H. Nakashima and N. Tsuji
    Mater. Sci. Forum, Vols.584-586(2008), 716-721.
  12. "Microstructural change of dislocation structure around SiGe/Si interface in SGOI wafer: wafer ramping proces"
    S. Ii, Y. Takaki, K. Ikeda, H. Nakashima and H. Nakashima
    Thin Solid Films, Vol.517(2008), 38-40.
  13. "Misfit dislocation formation at c/t interphase boundary in Y-TZP"
    S. Ii, H. Yoshida, K. Matsui and Y. Ikuhara,
    J. Am. Ceram. Soc., Vol.91(2008), 3810-3812.

    14. "2007"
  14. "アルミニウム誘起結晶化法による多結晶シリコン薄膜形成過程のその場加熱観察",
    池田賢一，廣田健，藤本健資，杉本洋平，高田尚記，井誠一郎，中島英治，中島寛，
    日本金属学会誌, Vol.71(2007), No.2, 158-163.
  15. "CeO2添加ZrO2多結晶体の応力誘起相変態",
    松尾孟，佐々木昭成，井誠一郎，池田賢一，中島英治，工藤高裕
    九州大学超高圧電子顕微鏡報告，Vol.31(2007)，76-77.
  16. "Interfacial Microstructure of Titanium Nitride - Titanium Diborid composite synthesized by hot shock compaction",
    S. Ii, T. Nishitani and R. Tomoshige,
    Mater. Sci. Forum, 561-565(2007), 2481-2484.

    17. "2006"
  17. "Structural and Electrical Evaluation for Strained Si/SiGe on Insulator",
    D. Wang, S. Ii, K. Ikeda, H. Nakashima, M. Ninomiya, M. Nakamae and H. Nakashima,
    Thin solid films, Vol.508(2006), 107-111.
  18. "PL Evaluation of Defects Generated in SiGe-On-Insulator Virtual Substrate Fabrication：Temperature Ramping Process",
    D. Wang, H. Nakashima, S. Ii, K. Ikeda, H. Nakashima K. Matsumoto and M. Nakamae,
    Appl. Phys. Lett. Vol.89(2006), No. 4, 041916-1-041916-3.
  19. "Microstructure and Surface Segregation of 3mol% Y2O3 doped ZrO2 particles",
    S. Ii, H. Yoshida, K. Matsui, N. Ohmichi and Y. Ikuhara,
    J. Am. Ceram. Soc., Vol.89(2006), iss.9, 2952-2955.
  20. "Photoluminescence and TEM evaluations of defects generated during　SiGe-on-insulator virtual substrate fabrication: Temperature ramping process",
    D. Wang, S. Ii, K. Ikeda, H. Nakashima K. Matsumoto, M. Nakamae and H. Nakashima,
    Nuclear Instruments and Methods in Physics Reaserch B, 253(2006), 31-36.
  21. "Transmission electron microscopy studies of misfit dislocation structure of Si/SiGe interface in SGOI wafer",
    S. Ii, K. Ikeda, H. Nakashima, K. Matsumoto, M. Nakamae and H. Nakashima,
    Proceeding of The 16th International microscopy congress (2006), p.1469.
  22. "Photoluminescence Evaluation of Defects Generated during Temperature Ramp-Up Pnalysis rocess of SiGe-On-Insulator Virtual Substrate Fabrication",
    Dong Wang, Seiichiro Ii, Ken-ichi Ikeda, Hideharu Nakashima and Hiroshi Nakashima,
    2006 8th International Conference on Solid-State and Integrated Circuit Technology (ICSICT-2006) Proceedings, pp.2193-2195.
  23. "Stress-induced phase transformation of CeO2 doped tetragonal ZrO2 polycrystal",
    H.Matsuo, A.Sasaki, S. Ii, K.Ikeda, H.Nakashima, T.Kudo,
    Proceeding of the 8th Cross Straits Symposium on Materials, Energy and Environmental Sciences, (2006), pp.133-134.
  24. "AIC法により作製された多結晶シリコン薄膜形成過程"
    池田賢一，廣田健，藤本健資，杉本陽平，高田尚記，井誠一郎，中島英治，中島寛，
    信学技法，　Vol.106(2006)，　pp.13-18.
  25. "AIC法により作製される多結晶Si薄膜形成過程のその場観察"
    池田賢一，廣田健，藤本健資，杉本陽平，高田尚記，井誠一郎，中島英治，中島寛，
    九州大学超高圧電子顕微鏡室報告， Vol.30(2006)，　pp.73-74.
  26. "3Y-TZP粉末の内部構造とY2O3の濃度分布"
    井誠一郎，吉田英弘，松井光二，幾原雄一，
    まてりあ，　Vol.45(2006)，　No.12，　P.875.
  27. "アルミニウム誘起結晶化法による多結晶シリコン薄膜形成過程のその場加熱観察"
    池田賢一，中島英治，廣田健，藤本健資，杉本陽平，高田尚記，井誠一郎，中島寛，
    まてりあ， Vol.45(2006)，　No.12，　P.906.

    28. "2005"
  28. "TEM in situ observation of fracture behavior in ceramic materials”,
    S. Ii, K. Matsunaga, C. Iwamoto, T. Yamamoto and Y. Ikuhara,
    Applied Surface Science, 241(2005), 68-74.
  29. "Variation of long-period stacking order structures in rapidly solidified Mg97Zn1Y2 alloy",
    M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara and M. Nishida,
    Mater. Sci. and Eng. A., 393(2005), 269-274.
  30. "Observations of Debonding of Reinforcing Grains in Silicon Nitride Ceramics Sintered with Yttria Plus Alumina Additives",
    P. F. Becher, G. S. Painter, M. J. Lance,S. Ii, and Y. Ikuhara,
    J. Am. Ceram. Soc., 88(2005), 1222-1226.
  31. "Nano-structure observation of strained Si-SGOI wafer by transmission electron Microscopy",
    Yuichi Takaki, T. Mizuguchi, K. Ikeda, H. Nakashima, S. Ii, H. Nakashima, M. Ninomiya, M. Nakamae,
    Proceeding of The 7th Cross Straits Symposium on Materials, Energy, and Environmental Sciences, (2005), pp. 123-124 .
  32. "セラミックス破壊の微視的観察と原子論的メカニズム"
    松永克志，井誠一郎，岩本知広，山本剛久，幾原雄一，
    まてりあ，　Vol.44(2005)，　No.4，　pp.302-307.
  33. "Transmission electron microscopy studies of strained-Si SGOI wafer"
    T. Mizuguchi, S. Ii, K. Ikeda, H. Nakashima, M. Ninomiya, M. Nakamae and H. Nakashima,
    Annual reports of HVEM laboratory, Kyushu Univ. Vol.29(2005), p.31.
  34. "傾角66oの[001]対称傾角粒界を有するルチル型TiO2双結晶の粒界原子構造",
    大野高裕，井誠一郎，柴田直哉，松永克志，幾原雄一，山本剛久，
    日本金属学会誌， Vol.69(2005)， No. 11， 1004-1009.
  35. "次世代ひずみSi-SGOIウェーハの微細構造観察"
    水口隆，井誠一郎，中島寛，池田賢一，中島英治，二宮正春，中前正彦，
    まてりあ，　Vol.44(2005)，　No.12，　p.971.

    36. "2004"
  36. "Identification of Crack Path of Inter- and Transgranular Fracture in Sintered Silicon Nitride by In-situ TEM",
    S. Ii, C. Iwamoto, K. Matsunaga, T. Yamamoto and Y. Ikuhara,
    Journal of Electron Microscopy, Vol. 53 (2004), 121-127.
  37. "In-situ Observation of Crack Propagation in Magnesium Oxide Ceramics",
    K. Matsunaga, S. Iii, C. Iwamoto, T. Yamamoto, and Y. Ikuhara,
    Nanotechnology, Vol. 15 (2004), S376-S381.
  38. "Effects of Dislocations on Ionic Conductivity of Yttria Stabilized Zirconia”,
    K. Otsuka, K. Matsunaga, A. Nakamura, S. Ii, A. Kuwabara, T. Yamamoto and Y. Ikuhara,
    Materials Transactions, Vol.45 (2004), 2042-2047.
  39. "High Resolution Microscopy Study for [001] Symmetric Tilt Boundary with a Tilt Angle of 66o in Rutile-type TiO2 Bicrystal",
    T. Ohno, S. Ii, N. Shibata, K. Matsunaga, Y. Ikuhara and T. Yamamoto,
    Materials Transactions, Vol.45 (2004), 2117-2121.
  40. "Direct Observation of Intergranular Crack Surface of Sintered Silicon Nitride",
    S. Ii, C. Iwamoto, K. Matsunaga, T. Yamamoto, M. Yoshiya and Y. Ikuhara,
    Philos. Mag., Vol.84(2004), 2767-2775.
  41. "Interaction between the Long Period Stacking Order Phase and Deformation Twin in Rapidly Solidified Mg97Zn1Y2 Alloy",
    M. Matsuda, S. Ii, Y. Kawamura, Y. Ikuhara and M. Nishida,
    Mater. Sci. and Eng. A., 386(2004), 447-452.
  42. "TEM in-situ straining experiments on crack propagation in brittle ceramics",
    K. Matsunaga, S. Ii, C. Iwamoto, T. Yamamoto and Y. Ikuhara,
    Proceeding of 8th Asia-Pacific Conference on Electron Microscopy, (2004), pp. 681-682.
  43. "TEM内その場観察法による窒化ケイ素の粒内破壊に伴う亀裂進展経路の同定"
    井誠一郎， 岩本知広，松永克志，山本剛久，幾原雄一，
    まてりあ，　Vol.43(2004)，　No.12， p.994.

    44. "2003"
  44. "Direct Evidence of Correlation between {20-1}B19´ and {114}B2 Deformation Twins in Ti-Ni Shape Memory Alloy",
    S. Ii, Y. Maruhashi, K. Yamauchi and M. Nishida ,
    Scripta Materiallia, Vol.49 (2003), 723-727.
  45. "Microstructure Modifications by Tensile Deformation in Ti-Ni Alloys",
    M. Nishida, K. Tanaka, S. Ii, M. Kohshima, S. Miura and M. Asai,
    Journal de physique IV, Vol. 112 (2003), pp.803-806.
  46. "Martensitic Transformation of Ti50Pd50-XFeX Alloys",
    S. Ii, M. Nishida, Y. Murakami and D. Shindo,
    Journal de physique IV, Vol. 112 (2003), 1035-1038.

    47. "2002"
  47. "Crystallography and Morphology of Twins in 9R Martensite in Ti-Pd-Fe Shape Memory Alloy",
    S. Ii, M. Nishida and T. Hara,
    Scripta Materialia, Vol.46 (2002), 549-554.
  48. "Combination and Interface Structure of 9R Martensite Plate Variants in Ti50.0Pd43.0Fe7.0 Shape Memory Alloy",
    S. Ii, M. Nishida, T. Hara and K. Enami,
    Materials Transactions, Vol.43 (2002), No.5, 902-907.
  49. "Ti-NiおよびTi-Pd形状記憶合金マルテンサイトにおける第二種双晶界面構造"
    井誠一郎，西田稔
    電子顕微鏡の実践と応用写真集，社団法人日本鉄鋼協会，日本金属学会共同刊行， p.164

    50. "2001"
  50. "Morphology and Crystallography of Twins in Martensite in Ti-Pd High Temperature Shape Memory Alloys",
    S. Ii, M. Nishida and T. Hara.,
    Proceedings of Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), The Japan Institute of Metals, (2001), pp.1879-1882.
    51. 　
    "2000"
  51. "Crystallography and Boundary Structure of Twins in Ti-Ni and Ti-Pd Martensites",
    M. Nishida and S. Ii
    52. Materials Science Forum Vols. 327-328 (2000), 103-110.
  52. "Effect of Thermal Cycling and Aging on Microstructure in Near-Equiatomic Ti-Pd Alloys",
    S. Ii, N. Matsuzaki, Y. Morizono and M. Nishida,
    Materials Science Forum Vols. 327-328 (2000), 167-170.
  53. "A New Electrochemical Method To Prepare Mesoporous Titanium (IV) Oxide Photocatalyst Fixed on Alumite Substrate",
    Y. Matsumoto, Y. Ishikawa, M. Nishida and S. Ii., The Journal of Physical Chemistry B Vol. 104 (2000) No. 17, 4204-4209.
  54. "Twinning Modes and Boundary Structure of 9R Martensite in Ti-Pd-Fe Alloy",
    S. Ii and M. Nishida,
    Proceeding of the Japan-Korea Joint Workshop on Advanced Processing Technology for Materials, Kumamoto University, 2000, pp.54-61.

    55. "1999"
  55. "Boundary Structure of <121> Type II Twin in B19 Martensite in Ti-Pd Shape Memory Alloy",
    S. Ii, M. Nishida and K. Hiraga,
    Proceedings of the International Conference on Solid-Solid Transformations '99 (JIMIC-3),
    Edited by M. Koiwa, K. Otsuka and T. Miyazaki, The Japan Institute of Metals, 1999, pp.1060-1063.

    56. "1998"
  56. "New Deformation Twinning Mode of B19’ Martensite in Ti-Ni Shape Memory Alloy",
    M. Nishida, S. Ii, K. Kitamura, T. Furukawa, A, Chiba, T. Hara and K. Hiraga,
    Scripta Materialia, Vol.39 (1998), No. 12, 1749-1754.
"Top of the page"

Presentation

    "2011"
    in The 55th Symposium of The Japanese Society of Microscopy, Takamatsu, September 30- October 1.
  1. Seiichiro Ii (Invited lecture)
    "Application of TEM/EELS for metallic materials -Trial to the grain boudnary properties-"

    2. in International conference on martensitic transformations (ICOMAT-2011), Osaka, in September 4-9.
  2. S. Ii, Y. Ono, Y. Tsuchiya, T. Koyano and K. Tsuchiya
    "Shape memory effect and superelasticity at cryogenic temperatures in Cu-Al-Mn alloy"
  3. F. Meng, K. Tsuchiya, S. Ii, Y. Yokoyama
    "Influence of Ni on stability of martensitic transformation in Zr50Cu50-xNix"

    4. in The 12th World Conference on Titanium(Ti-2011), Beijing, China, June 19-24.
  4. S.Emura, X. Min, S. Ii, K. Tsuzaki and K. Tsuchiya
    "Improvement of Mechanical Properties in Ti Alloys Using Heterogeneouus Elemental Distribution"
  5. K. Tsuchiya, S. Farujami, B. Jiang, S. Emura, X. Min and S. Ii
    "Effect of High-Pressure Torsion Deformation on Isothermal Omega Phase in Beta-Ti alloys"
  6. K. Tsuchiya, T. Hara, S. Emura, X. Min, S. Ii, K. Tsuzaki, X. Man, K. Tanaka and A. Uemoto
    "3D Observation of Isothermal Omega Phase in Beta-Ti Alloy by Novel Orthogonal FIB/SEM System
  7. X. Min, S. Emura, S. Ii, K. Tsuchiya and K. Tsuzaki
    "Ductility Improvement in High Strength Ti-Mo Alloys by Transition of Deformation Mode"
"Top of the page"

Links

NIMS
Microst. Design Group