Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T.
Three-dimensional crystallographic and local variant configuration analysis of lath martensite in medium-carbon steel
Welding and Joining Technology Group
Publications
2026
-
-
Yoshinaka F., Sawaguchi T., Nagira T., Takamori S., Emura S., Inoue Y.
Low cycle fatigue and microstructures of Fe–15Mn–11Cr–7.5Ni–4Si alloy
2025
-
Kawabata T., Kitano H., Ozawa T., Mikami Y.
Reverse bend experiments on the base plate and discussion of the appropriate amount of reverse bending for precrack straightness (Effect of the reverse bend process on the CTOD toughness evaluation and understanding of its mechanisms)
-
Kitano H., Saitou N., Takahashi T.
Study on AI Collaborative System for Efficient Skill Improvement of Welding Skills Trainee*
-
Nagira T., Kitano H., Kimura T., Yoshinaka F., Takamori S., Sawaguchi T., Yamashita T., Aoki Y., Fujii H.
In situ synchrotron X-ray imaging of curved columnar growth and ripple formation in Fe-Mn-Cr-Ni-Si alloy during GTA welding
-
Nagira T., Nakamura T., Sawaguchi T., Mori M., Morisada Y., Fujii H.
Friction Stir Welding of Fe–15Mn–10Cr–8Ni–4Si Seismic Damping Alloy
-
Shimizu K., Nakayama S., Shoji H., Kawakubo T., Nagira T., Ohata M., Fujii H.
Significance of fracture toughness for linear friction welded joint of weathering steel
-
Yamashita T., Nagira T., Gong W., Kawasaki T., Harjo S., Ushioda K., Fujii H.
Evaluation of Residual Stress Distribution in Linear Friction Welded Steel Joint via Neutron Diffraction Mapping Measurement
2024
-
Nagira T., Kitano H., Kimura T., Yoshinaka F., Takamori S., Sawaguchi T., Yamashita T., Aoki Y., Fujii H., Takeuchi A., Uesugi M.
In-situ observation of solidification behaviors of Fe-Mn-Cr-Ni-Si alloy during TIG melt-run welding using synchrotron radiation X-ray
-
Nagira T., Nakamura T., Yoshinaka F., Sawaguchi T., Inoue Y.
Microstructure and Mechanical Properties of Gas Metal Arc-welded Fe-Mn-Si Seismic Damping Alloy
-
Nishikawa H., Furuya Y., Kitano H., Kanegae Y., Aota K., Kuwabara K.
Distinctive fatigue properties of additively-formed CoCrFeNiTiMo multi-principal element alloy: Excellent fatigue crack growth resistance against ordinally high cycle fatigue strength
-
Shimizu K., Nakayama S., Shoji H., Kawakubo T., Nagira T., Ohata M., Fujii H.
Significance of fracture toughness for linear friction welded joint of weathering steel
-
Yoshinaka F., Tsutsumi Y., Nagira T., Takamori S., Emura S., Sawaguchi T., Katayama H., Nakamura T., Inoue Y., Motomura S., Kushibe A.
Effects of the Cr and Ni Concentrations on the Fatigue and Corrosion Resistances of Fe–Mn–Cr–Ni–Si Alloys for Seismic Damping Applications
2023
-
Huang W., Wang Q., Ma N., Kitano H.
Characteristics of residual stress distribution in wire-arc additive manufactured layers of low transformation temperature material
-
Katagiri J., Kusano M., Minamoto S., Kitano H., Daimaru K., Tsujii M., Watanabe M.
Melt Pool Shape Evaluation by Single-Track Experiments and Finite-Element Thermal Analysis: Balling and Lack of Fusion Criteria for Generating Process Window of Inconel738LC
-
Nagira T.
Recent Trend of FSW/FSP [FSW/FSP 研究の現状]
-
Nagira T., Nakamura T., Kimura T., Yoshinaka F., Sawaguchi T., Yamashita T., Aoki Y., Fujii H.
Elucidation of solidification mode of Fe-Mn-Si alloy during TIG spot welding using synchrotron X-ray
-
Nagira T., Nakamura T., Sawaguchi T., Mori M., Morisada Y., Fujii H.
Friction Stir Welding of Fe-15Mn-10Cr-8Ni-4Si Seismic Damping Alloy
-
Ogino Y., Nomura K., Komen H., Kitano H., Tanaka M.
Recent Progresses and Future Prospects of Science and Technology in Welding Process [溶接法研究委員会 －新溶接アーク現象のその先へ－]
-
Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T., Tsuzaki K.
Substructure and crystallography of lath martensite in as-quenched interstitial-free steel and low-carbon steel
-
Wu Z., Nagira T., Ushioda K., Miyamoto G., Fujii H.
Microstructures and Tensile Properties of Friction Stir Welded 0.2%C-2%Si-Cr Steels