高温形状記憶合金 御手洗容子

 

 

 

 

NIMS Thermodynamic Database    阿部 太一 / Taichi ABE

研究成果/ Research accomplishment, activity 2014

私たちのグループでは、『析出強化型15Crフェライト耐熱鋼』の750 ºC、30 MPaにおける6万時間を超える長時間クリープデータの取得に成功しました。また、熱間押出により、写真のような直径70mm、肉厚8mmの開発鋼の継目無管を作製できました。これらの成果は、開発鋼が先進高効率火力発電プラントの高温構造部材に応用されるのに役立つと考えています。これらは10月7日(火)の日刊産業新聞に紹介されました。

Our group was successful in obtaining the long-term creep data of “Precipitation-Strengthened 15Cr Ferritic Heat-Resistant Steel (PS15CrFHRS)” under the conditions of 750 ºC and 30 MPa over 60 000 hours. And we were also successful in making a seamless tube of PS15CrFHRS with a diameter of 70 mm and a thickness of 8 mm by hot extrusion process as shown in the photo. We believe that these results will contribute to apply the PS15CrFHRS to high-temperature structural components of advanced high-efficient thermal power plants. The above mentioned achievements were introduced in “Japan Metal Bulletin (in Japanese)” on Oct. 7th.

2014.9月

2014年秋期日本金属学会講演大会において、三重大学との共同研究成果について 下記のポスター発表を行い、優秀ポスター賞を受賞しました。 「分子動力学法を用いたTiAl金属間化合物における転位挙動の解析」 竹内俊一(三重大), 河村貴宏(三重大), 鈴木泰之(三重大), 北嶋具教(NIMS)

2014. September Our group is collaborating with Mie University. Mr. Takeuchi who is a Master's course student of Mie University won " The Metals Best Poster Award" about that collaboration at 2014 Autumn Meeting of the Japan Institute of Metals and Materials.

The awarded poster is as follows, "Molecular dynamics analysis of dislocation behaviors in intermetallic TiAl", S. Takeuchi(Mie Univ.), T. Kawamura(Mie Univ.), Y. Suzuki(Mie Univ.), T. Kitashima(NIMS)

         

2014. 3月 金属学会  ・  鉄鋼協会春期大会で発表 /March, 2014 presentation in  JIM  and  ISIJ

御手洗容子/Raju Arockiakumar, 原徹、IHI 高橋円、高橋聡、東工大 細田秀樹,TiPd高温形状記憶合金の形状記憶特性と温度サイクル繰返特性(日本金属学会/JIM)
A. Jastrzebska/Y. Yamabe Mitarai, WUT Z. Pakiela,Phase and microstructure studies of Ti-Al-Nb alloys(日本金属学会/JIM poster)
M. Jayaprakash/D. H. Ping, Y. Yamabe-Mitarai ,Effect of Ta, Zr and Si alloying additions on Room Temperature and High Temperature Mechanical Properties of Near-α Ti Alloy(日本金属学会/JIM)
P.Żywicki/D.H. Ping, H. Garbacz, Y. Yamabe-Mitarai, K. J. Kurzydłowski,Phase transformations and twinning in metastable β Ti Nb and β Ti Nb Pd alloys(日本金属学会/JIM)
田崎亘/下条雅幸、NIMS K.S. Suresh, 北嶋具教、御手洗容子,Ptを添加したTiPdZr合金の相変態と形状記憶特性(日本金属学会/JIM poster)
北嶋具教/K.S. Suresh, 岩崎智, 御手洗容子,耐酸化性に優れたニアαチタン合金の開発(鉄鋼協会 / ISIJ)
阿部太一/澤田由紀子、橋本清、小山敏幸、小林能直,NdFeB磁石のための熱力学データベース構築(日本金属学会/JIM)
戸田佳明/阿内三成、澤田浩太、九島秀昭、木村一弘,700℃級フェライト耐熱鋼の開発(日本金属学会/JIM)
阿内三成/戸田佳明、澤田浩太、九島秀昭、木村一弘,Niを添加した析出強化型15Crフェライト耐熱鋼の水蒸気酸化挙動(日本金属学会/JIM)

研究成果/ Research accomplishment, activity 2013

2013.9月 に金沢大学で開催された金属学会、鉄鋼協会で下記の発表を行いました。/ We had presentation in JIM and ISIJ held in Kanazawa university from Sep. 17-Sep. 19.

金属学会・鉄鋼協会発表

Ti合金
・ M. Jayaprakash D. H. Ping Y. Yamabe-Mitarai:  (15分) Alloying element effects on the mechanical properties of near alpha high temperature Ti alloys
・ K. S. Suresh T. Kitashima Y. Yamabe-Mitarai: (15分) Strain rate history effects in high temperature Titanium alloy
・ 北嶋 具教 K. S. Suresh 御手洗 容子 岩崎 智: (15分) 耐熱チタン合金の機械的特性及び耐酸化特性へのGaとSn添加の影響
形状記憶合金
・ A. Wadood, H. Hosoda, Y. Yamabe-Mitarai: TiAu Based High Temperature Shape Memory Alloys
・ R. Arockiakumar Y. Yamabe Mitarai, M. Takahashi S. Takahashi Isobaric thermal cycling of Ti-50Pd-5V shape memory alloy: effect of training
・ 御手洗容子, Raju Arockiakumar, 原徹, 高橋 円, 高橋 聡, 細田 秀樹:8族元素を添加したTiPd合金の相変態と形状記憶特性
・ P. Żywicki, D. H. Ping, H. Garbacz, Y. Yamabe-Mitarai, K. J. Kurzydłowski   α martensite formation due to surface effect in β-type Ti alloys
耐熱材料
・戸田 佳明, 阿内 三成, 澤田 浩太, 九島 秀昭, 木村 一弘 Niを添加した析出強化型15Crフェライト鋼の高温クリープ強度
・北嶋 具教: Ni基超合金の高温酸化挙動シミュレーション 物材機構 ○戸田 佳明 阿内 三成 澤田 浩太 九島 秀昭 木村 一弘
・阿内 三成 戸田 佳明 大久保 弘 澤田 浩太 九島 秀昭 木村 一 析出強化型15Crフェライト耐熱鋼の水蒸気酸化挙動 状態図・相平衡
・4副格子モデルによるBCC相中の短範囲規則度の取り扱い 阿部 太一 下野 昌人

"Best presentation award"

 Pawel Zywicki who is PhD student of Warsaw University of Technology and stay in NIMS under joint graduate university program, won "Best presentation award" in WUT-HHT(Hitach High Tech) -NIMS 4th workshop held in Tsukuba. The presentation title is "The effect of hydrostatic extrusion on phase transformations and microstructure in Ti-30Nb-3Pd alloy ".
ワルシャワ工科大学の博士課程の学生で、連携大学院制度を利用してNIMSに滞在しているPawel Zywickiが、第4回WUT-HHT(日立ハイテク)-NIMSワークショップでベストプレゼンテーション賞を受賞しました。発表のタイトルは「Ti-30Nb-3Pd合金の相変態と組織に対する静水圧押出の効果」です。

研究活動/ Research activity

We had 5 internship students in our group between April to September from Indonesia, Japan, Poland, and France.

4月から9月の間に5人のインターンシップ生を受け入れました。 インドネシア、日本、ポーランド、フランスからの学生さんです。
    Photo: A polish student received the certificate of completion of internship from president Ushioda
ポーランドからの学生さんが理事長からインターンシップの修了書を受け取りました。

2013. 3月 金属学会  ・  鉄鋼協会春期大会で発表
/March, 2013 presentation in  JIM  and  ISIJ

K.S. Suresh/T. Kitashima, Y. Yamabe-Mitarai, Impact toughness and fractography of high temperature Titanium alloy ( 鉄鋼協会 /  ISIJ ) 
戸田佳明/阿内三成、渋谷直哉、澤田浩太、九島秀昭、木村一弘, 新しい材料設計指針に基づくフェライト耐熱鋼の開発 ( 日本金属学会 /  JIM ) /Development of ferritic heat resistant steel based on new material design 
御手洗容子/R. Arockiakumar、原徹、IHI 高橋円、高橋聡、東工大 細田秀樹, TiPdZr合金の形状記憶特性 ( 日本金属学会 /  JIM )/ Shape memory properties of TiPdZr alloys  
Abdool Wadood/M. Takahashi, S. Takahashi, H.Hosoda, Y. Yamabe-Mitarai, High Temperature Shape Memory Effect and Oxidation Behavior of TiAu-Zr Alloy ( 日本金属学会 /  JIM ) 
Raju Arockiakumar/Y. Yamabe Mitarai, IHI M. Takahashi, S. Takahashi, Effect of Pd content on the phase stability and shape memory behavior of Ti-Pd-5x ( 日本金属学会 /  JIM ) 
Pawel Żywicki/D.H. Ping, H. Garbacz, Y. Yamabe‑Mitarai, K. J. Kurzydłowski, The effect of hydrostatic extrusion on phase transformation and microstructure in Ti-30Nb-3Pd alloy ( 日本金属学会 /  JIM ) 
M. Jayaprakash/W. L. Xiao, D.H. Ping, Y. Yamabe-Mitarai, Effect of Zr on microstructure and mechanical properties of near alpha Ti-Al-Zr-Sn based alloy ( 日本金属学会 /  JIM ) 

2012. 10.25 NIMSフォーラム /NIMS forum on Oct. 25, 2012.

2012. 10.25 NIMSフォーラムにて、御手洗容子が高温形状記憶合金の発表をします。

Research of High temperature shape memory alloys will be presented in NIMS forum on Oct. 25, 2012.

高温形状記憶合金の開発 第12回 NIMSフォーラム ミニ講演発表内容 紹介 2

第12回 NIMSフォーラム ポスター御手洗容子

2012.10月16日 WUT-HHT-NIMS ワークショップに参加しました。 /Oct. 16: We joined WUT-HHT-NIMS workshop

・この夏、インターンシップ生としてNIMSに滞在した Kamil Marek Czelej さんと Kamil Majchrowicz さんが、ワルシャワ工科大学で開催された、WUT(Warsaw University of Technology) - HHT (Hitachi High Technology) -NIMS ワークショップでポスター発表を行いました。 ・御手洗が、同ワークショップで "Ti-base functional and structural materials -high temperature use-という発表を行いました。(写真  1,  2 )

Kamil Marek Czelej and Kamil Majchrowicz who stayed in NIMS as an internship student in this summer gave poster presentation in WUT(Warsaw University of Technology) - HHT (Hitachi High Technology) -NIMS workshop held in Warsaw University of Technology. (See photos 1,  2 ) ・Yoko Yamabe-Mitarai gave an presentation titled "Ti-base functional and structural materials -high temperature use-2 in WUT-HHT-NIMS workshop held in Warsaw University of Technology.

2012.10月17日、18日: Energy Materials Conferenceに参加しました。 /Oct. 17-18 We joined Energy Materials Conference

戸田と御手洗がイギリスのLoughborough 大学で開催されたEnergy Materials Conferenceに参加しました。 戸田は"Development of Precipitation Strengthened 15Cr Ferritic Steel for Advanced High Efficiency Power Plants"について、御手洗は"Potential of TiPt and TiPd as high-temperature shape memory alloys"について講演を行いました。写真

Toda and Mitarai joined Energy Materials conference held in Loughborough University, UK. Toda talked about "Development of Precipitation Strengthened 15Cr Ferritic Steel for Advanced High Efficiency Power Plants". Mitarai talks about "Potential of TiPt and TiPd as high-temperature shape memory alloys"(photo)

2012.9月金属学会・鉄鋼協会 /September, 2012 Institute Metals and The Iron and Steel Institute of Japan.

御手洗容子/原徹、川喜多磨美子、IHI 高橋円、IHI 高橋聡、東工大 細田秀樹 ,

TiPdZrにおける相変態と形状記憶効果の合金組成依存性

Alloy composition dependence on phase transformation and shape memory effect in TiPdZr

R. Arockiakumar/H. Maheswari, M.Kawakita, Y. Yamabe Mitarai, IHI M. Takahashi, S. Takahashi ,Effects of group IVB, VB and VIB transition elements on the shape memory

A.Wadood/Y. Yamabe-Mitarai, T. Inamura, H.Hosoda , Analyzing Ti-Cr and Ti-Pt based Alloys for Room to High Temperature Applications

D. H. Ping/W. L. Xiao, Y. Yamabe-Mitarai ,Microstructural characterization of several near-α high temperature Ti alloys
北嶋具教 , 耐熱チタン合金の圧縮強度及び酸化特性へのMo、W、Yの添加の影響

T.Kitashima ,Influence of Mo, W, and/or Y additions on the compressive strength and the oxidation resistance of high temperature titanium alloys

NIMS conference 2012  (2012.6.4-2012.6.6)

2012. 6月4日から6日 NIMS conference 2012 に参加し、ポスター発表を行いました。Raju Arcokiakumarがポスター賞を受賞しました。

We attended NIMS conference 2012 and gave poster presentations. 、 Raju Arockiakkumar won poster award

2012. 3月 金属学会で発表 /March, 2012 presentation in JIM

2012. 3月 鉄鋼協会で発表/March, 2012

D. H. Ping, Tensile properties and microstructure of Ti-Al-Sn-Zr-Sc alloys

北嶋具教, チタンの高温酸化における酸素固溶シミュレーション

T.Kitashima , "Numerical sumulation of oxygen solid solution during oxdation of titanium".

御手洗容子, TiPt の結晶構造と形状記憶効果に及ぼす Ir 添加の影響 W.

Y. Yamabe-Mitarai, Ir effect on crystal structure and shape memory effect of TiPt

L. Xiao, Microstructure and oxidation behaviors of near-α Ti-Al-Zr-Mo-V-Sc alloys
S. Q. Wu, The relationship between β-twinning structure and plate-like ϖ phase in Ti-Nb alloys

presentation in ISIJ

北嶋具教, 耐熱チタン合金の組織および圧縮強度に対する Si と Ge の複合添加の影響

T. Kitashima, Influence of simultaneous additions of Si and Ge on the microstructure and the compressive strength of a high temperature titanium alloy.

御手洗容子, α-Ti 合金の組織と耐酸化性に対する Nb の影響

Y. Yamabe-Mitarai, The effect of Nb on microstructure and oxidation resistance in α-Ti alloys .

☆2011. 11月 構造材料シンポジウムでグループメンバーがポスター発表をしました。

高温形状記憶合金 御手洗容子

Advanced high temperature Ti alloys  平徳海

・組織自由エネルギー法により10年後の材料組織

変化を予測する   戸田佳明

・数値シミュレーションを利用した材料設計 北嶋具教

☆2011.10月 NIMSフォーラムでグループの 研究紹介をしました。