| ＜論文 ・ Original Papers＞ 1995 〜 |
| Seiji Kuroda, Andrew Sturgeon "Thermal Sprayed Coatings for Corrosion
Protection in Atomospheric and Aqueous Environments", ASM,13B 2005 |
| Jin Kawakita, Seiji Kuroda, Takeshi Fukushima, "Acid Resistance of
HastelloyC Coatings Formed by Modified HVOF Spaying with A Gas Shroud",Proceeding
of International Sympoosium at UMST July 2003,UMIST, Manchester, England
, pp1-12 |
| Jin Kawakita, Seiji Kuroda, Takeshi Fukushima, Toshiaki Kodama,"Development
of Dense Corrosion Resistant Coatings By an Improved HVOF Spraying Prosess"
,Proceeding of International Thermal Spray Conference 2003, Orland, USA,
May 2003, pp 353-359 |
| ThiyagaranSundararajan, Seiji Kuroda, Takehiko Itagaki, Fujio Abe, "Effect
of Thermal Sprayed AL on the Steam Oxidation Resistance of 9Cr-1Mo Steel"
,Proceeding of International Thermal Spray Conference 2003, Orland, USA,
May 2003, pp503-508 |
| Kazuhiko Isoyama, Jin Kawakita, Seiji Kuroda, Hisami Yumoto, "Key
Factors for Dense Copper Coating by HVOF Spraying", Proceeding of
International Thermal Spray Conference 2003, Orland, USA, May 2003, pp755-762 |
| Seiji Kuroda, Jin Kawakita, M. Takemoto, Thermal Spray Committee ,"Marine
Exposure Tests of Thermal Sprayed Coatings in Japan", Proceeding of
International Thermal Spray Conference 2003, Orland, USA, May 2003, pp343-352 |
| ThiyagaranSundararajan, Seiji Kuroda, Takehiko Itagaki, Fujio Abe, "Steam
Oxidation Resistance of HVOF Thermal Sprayed Ni-Cr Coatings" ,Proceeding
of International Thermal Spray Conference 2003, Orland, USA, May 2003,
pp495-502 |
| Thiyagara Sundararajan, Seiji Kuroda, Takehiko Itagaki, Fujio Abe, "Steam
Oxidation Resistance of Thermal Sprayed Ni-Cr Alloy Coatings", 耐熱金属材料１２３委員会研究報告、４３ （２００３）１１、pp309-324 |
| Jin Kawakita, Takeshi Fukushima, Seiji Kuroda,Toshiaki Kodama, "Corrosion
Resistance of HastelloyC Coatings Formed by an Improved HVOF Thermal Spraying
Process", MATERIALS TRANSACTIONS, 44 (2003), pp253-258 |
| Seiji Kuroda,Jin Kawakita, Takeshi Fukushima, Syougo Tobe, "Importance
of the aAdhesion of HVOF Sprayed Coatings for aAqueous Corrosion Resistance", MATERIALS
TRANSACTIONS, .44, No3 (2003), pp381-388 |
| Jin Kawakita, Seiji Kuroda, Toshiaki Kodama, " Evaluation of Through-porosity
of HVOF Sprayed Coating", SURFACE & COATINGS TECHNOLOGY, 166,
(2003) pp17-23 |
| ThiyagaranSundararajan, Seiji Kuroda, Takehiko Itagaki, Fujio Abe, "Steam
Oxidation Resistance of Ni-Cr Thermal Sprayed Coatings on 9Cr-1Mo Steel
Part1:80Ni-20Cr", ISIJ International, 43 (2003) pp95-103 |
| ThiyagaranSundararajan, Seiji Kuroda, Takehiko Itagaki, Fujio Abe, "Steam
Oxidation Resistance of Ni-Cr Thermal Sprayed Coatings on 9Cr-1Mo Steel
Part2:50Ni-50Cr", ISIJ International, 43 (2003) pp104-111. |
| Seiji Kuroda, Takeshi Fukushima, Masaki Sasaki, Toshiaki Kodama, "Microstructure
and Corrosion Resistance of HVOF Sprayed 316L Stainless Steel and Hastelloy
C Coatings", MATERIALS TRANSACTIONS, 43 No12, (2002), pp3177-3183 |
| Akio Kishi, Seiji Kuroda, Takeshi Fukushima, Tadanobu Inoue, Hisami Yumoto,
International Conference on Designing of Interfacial Structures in Advanced
Materials and their Joints, Osaka、(2002) 11,Proc. Of International Conference
on Designing of Interfacial Structures in Advanced Materials and their
Joints |
| Jin Kawakita, Takeshi Fukushima, Seiji Kuroda, "Corrosion Behaviour
of HVOF Sprayed SUS316L Stainless Steel In Seawater", CORROSION SCIENCE,
44 (2002), pp2561-2581 |
| Jin Kawakita, Takeshi Fukushima, Seiji Kuroda, Toshiaki Kodama,"Improvement
of corrosion resistance of HVOF thermal sprayed coationgs by gas shroud",
15th International Corrosion Congress, Proc. of 15th International Corrosion
Congress Sep.2002, Granada, Spain |
| Seiji Kuroda, Takeshi Fukushma, Jin Kawakita, Toshiaki Kodama, "Marine
corrosion resistance of HVOF sprayed alloy coatings: comparison of field
exposure test and laboratory test", Proc. of International Thermal
Spray Conference 2002, Essen, Germanay, pp819-824 |
| Takeshi Fukushima, Hideto Yamada, Jin Kawakita, Seiji Kuroda, "Correlation
between the in-flight conditions of HVOF sprayed particles and the coatings
structure", Proceeding of International Thermal Spray Conference &
Exposition 2002 , Essen,Germanay |
| Seiji Kuroda, Philip Biazdel“Suspension plasma spray of ceramics by using
an ink net printer"、Proceeding of International Thermal Spray Conference
2002, Essen, Germany,p539-543 |
| Jin Kawakita, Seiji Kuroda, Toshiaki Kodama, "Evaluation on Through-porosity
of HVOF Sprayed Coating", Proceeding of International Thermal Spray
Conference 2002, Essen, Germanay, pp681-685 |
| 福島孟、”Tic/Mo溶射皮膜の高温特性”高温学会誌、Vol.28,No.4,171-175、（2002） |
| 福島孟、”Tic/Mo 傾斜組成皮膜の形成と皮膜の性質”高温学会誌、Vol.28, No.4, 165-170、（2002） |
| 福島孟、黒田聖治, ”HVOF溶射による316Lステンレス鋼皮膜の酸化及びガスシュラウドによる酸化制御”,
溶接学会誌、第20巻 No.2 pp439-444、（2002） |
| 川村昌志（KHI）、黒田聖治、村松由樹, "レーザースペックル法によるセラミック溶射皮膜の歪み測定"、
耐熱金属材料123委員会、 42（2001）No.2, pp269-274． |
| J. Kawakita, T. Fukushima, S. Kuroda and T. Kodama,“Corrosion behaviour
of HVOF sprayed coatings in seawater”, Proceeding of International Thermal
Spay Conference 2001, New Surfaces for a New Millennium, C.C. Berndt, Ed.,
ASM International,p.1137-1142. |
| T. Fukushima and S. Kuroda, “Oxidation of HVOF sprayed alloy coatings
and its control by a gas shroud”, Proceeding of International Thermal
Spay Conference 2001, New Surfaces for a New Millennium, C.C. Berndt, Ed.,
ASM International, p.527-532. |
| H. Yamada,S. Kuroda, T. Fukushima andH. Yumoto,“Capture and evaluation of HVOF thermal
sprayed particles by a gel target”, Proceeding of International Thermal
Spay Conference 2001, New Surfaces for a New Millennium, C.C. Berndt, Ed.,
ASM International, p.797-804. |
| S. Kuroda, T. Fukushima and S. Tobe, “Importance of the adhesion of HVOF
sprayed coatings for aqueous corrosion resistance”, Proceeding of International
Thermal Spay Conference 2001, New Surfaces for a New Millennium, C.C. Berndt,
Ed., ASM International, p.1123-1130 |
| P. Blazdell and S. Kuroda, “A bimodal ceramic ink for continuous jet printer
applications”, J. Amer. Cera. Soc., 84 (2001) pp1257-1259 |
| Seiji. Kuroda, Jin Kawakita, Takeshi. Fukushima and Shogo Tobe, “Importance
of the adhesion of HVOF sprayed coatings for aqueous corrosion resistance”,
Proceeding of 10th Iketani Conference on Materials Research toward the
21st Century, 2000, June , Karuizawa, pp26-30 |
| S. Kuroda, T. Fukushima, M. Sasaki and T. Kodama, “Microstructure and
corrosion resistance of HVOF sprayed 316L stainless steel and Ni base alloy
coatings”, Proceeding of International Thermal Spay Conference 2000, Thermal
Spray: Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM
International, Montreal, Canada, May 2000, pp.455-462 |
| S. Kuroda and M. Takemoto, “Ten-year interim report of thermal sprayed
Zn, Al and Zn-Al coatings exposed to marine corrosion by Japan Association
of Corrosion Control”, Proceeding of International Thermal Spay Conference
2000, Thermal Spray: Surface Engineering via Applied Research, C.C. Berndt,
Ed., ASM International, pp.1017-1024 |
| P. Blazdell and S. Kuroda, “The Effect of Substrate Properties on Plasma
Spraying of Submicron Ceramic Suspensions Using a Continuous Ink Jet Printer“,
ISIJ International, 40 Supplement(2000) pp59-63 |
| P. Blazdell and S. Kuroda, “Plasma spraying of submicron ceramic suspensions
by a continuous ink jet printer”, Surface and Coatings Technology, 123(2000)pp239-246 |
| P. Blazdell and S. Kuroda,“Thermal spraying for the new millennium”,
Materials World, April(1999)205-7 |
| 黒田聖治，田代安彦，湯本久美，平良進，深沼博隆，"高速フレーム溶射皮膜に発生する応力のその場測定 ―高速フレーム溶射皮膜の残留応力―"，溶接学会論文集，17(1999)102-110 |
| 黒田聖治，田代安彦，湯本久美，平良進，深沼博隆，"高速ガス炎溶射皮膜の残留応力"，溶接構造シンポジウム‘９７講演論文集，pp.201-8. <溶接構造シンポジウム優秀論文賞> |
| Seiji. Kuroda, “Properties and characterization of thermal sprayed coatings
?A review of recent research progress”, Proceeding of 15th International
Thermal Spray Conference, C. Coddet ed., Nice, France, May 1998, pp.539-50 |
| S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, and T. Fukanuma,“Peening action
and residual stresses in HVOF thermal spraying of 316L stainless steel”,
Proceeding of 15th International Thermal Spray Conference, C. Coddet ed.,
Nice, France, May 1998.<Best paper award, ITSC’98> pp 569-74 |
| 黒田聖治，"溶射のシミュレーション"，表面技術, 48 (1997) pp885-89. |
| S. Kuroda, Y. Tashiro, H. Yumoto, S. Taira, and T. Fukanuma,“Measurement
of stress developmnet during HVOF thermal spray”, Proceeding of 1st United
Thermal Spray Conference , Indianapolis, USA, Sept. 1997, pp.805-11 |
| S. Kuroda, Y. Tashiro, and T. Fukushima, "Modeling and measurement
of stress evolution in FGM coatings during fabrication by thermal spray",
Proceeding of FGM96, I.Shiota and M.Y. Miyamoto Eds., Tsukuba, Japan,
Oct. 1996, pp.59-64 |
| S. Kuroda and S. Kitahara, "A consideration on the microsructural
development of plasma sprayed ceramic coatings", Elevated Temperature
Coatings: Science and Technology 2, Proceeding of TMS'96, Anaheim, USA,
Feb. 1996, pp.21-30 |
| L. Bianchi, P. Lucchese, A. Denoirjean, S. Kuroda, and P. Fauchais, "Evolution
of quenching stress during ceramic thermal spraying with respect to plasma
parameters", to be published in the Proceeding of NTSC'95 |
| S. Kuroda and S. Kitahara, "Effects of spray conditions on the pore structure and quenching stress in plasma sprayed coatings", Proceeding of International Thermal Spay Conference 1995, Ed. by A. Ohmori, Kobe, May, 1995, p.489-494 |
| S. Kuroda, T. Dendo and S. Kitahara, "Quenching Stress in Plasma Sprayed Coatings and Its Correlation with the Deposit Microstructure", J. Thermal Spray Technol. 4 Jan.(1995) pp75-84 |
 |
| ＜特許 ･ Patent＞ |
| 特願301023238号 |
ガスシュラウド付き溶射方および溶射装置、平成13年10月9日 福島孟､黒田聖治 |
| 特許第3265359号 |
コーティング法、平成14年1月11日、黒田聖治、ﾌｨﾘｯﾌﾟ ﾌﾞﾗｯﾂｪﾙ |
| 特許第3069696号 |
耐食溶射皮膜とその製造法､平成H12年5月26日 |
| 特許第3015877号 |
溶接部の動的ひずみ測定方法､平成11年12月24日 |
| 特許第3113908号 |
表面皮膜の剥離・密着性測定方法、平成12年 9月29日 |
| 特許第1599187号 |
飛行粒子の速度と温度の同時測定装置、平成6年4月25日 |
| 特許第1838398号 |
飛行粒子の速度測定装置、平成6年4月25日 |
| 特許第1599188号 |
飛行粒子の速度測定装置、平成6年4月25日 |
|