Mukai T, Somekawa H, Inoue T, Singh A
Strengthening Mg-Al-Zn alloy by repetitive oblique shear strain with caliber roll
SCRIPTA MATERIALIA, 62, 113-116, (2010).

Somekawa H, Inoue T, Mukai T
Deformation mechanism near crack-tip by finite element analysis and microstructure observation in magnesium alloys
MATERIALS SCIENCE AND ENGINEERING A, 527, 1761-1768, (2010).

Somekaw H, Mukai T
Microstructure evolution of Mg-Al-Zn alloys during compression test at low strain and temperature
MATERIALS SCIENCE AND ENGINEERING A, 527, 370-375, (2009).

Cady CM, Gray GT, Liu C, Lovato ML, Mukai T
Compressive properties of a closed-cell aluminum form as a function of strain rate and temperature
MATERIALS SCIENCE AND ENGINEERING A, 525, 1-6, (2009).

Watanabe H, Fukusumi M, Somekawa H, Mukai T
Texture and mechanical properties of a superplastically deformed Mg-Al-Zn alloy sheet
SCRIPTA MATERIALIA, 61, 883-886, (2009).

Somekawa H, Singh A, Mukai T
Superplastic behavior in Mg-Zn-Y alloy with dispersed quasicrystal phase particles
ADVANCED ENGINEERING MATERIALS, 11, 782-787, (2009).

Somekawa H, Osawa Y, Singh A, Mukai T
Rare-earth free wrought-processed magnesium alloy with dispersion of quasicrystal phase
SCRIPTA MATERIALIA, 61, 705-708, (2009).

Inoue T, Somekawa H, Mukai T
Hardness variation and strain distribution in magnesium alloy AZ31 processed by multi-pass caliber rolling
ADVANCED ENGINEERING MATERIALS, 11, 654-658, (2009).

Takamori S, Aoyagi T, Mukai T, Kimura T, Osawa Y
Surface and interior microstructure changes of Al cast iron by high temperature oxidation
JOURNAL OF JAPAN FOUNDRY ENGINEERING SOCIETY, 82, 70-74, (2009).

Wang CL, Mukai T, Nieh TG
Room temperature creep of fine-grained pure Mg: A direct comparison between nanoindentation and uniaxial tension
JOURNAL OF MATERIALS RESEARCH, 24, 1615-1618, (2009).

Mironov S, Motohashi Y, Kaibyshev R, Somekawa H, Mukai T, Tsukaki K
Development of fine-grained structure caused by friction stir welding process of a ZK60A magnesium alloy
MATERIALS TRANSACTIONS, 50, 610-617, (2009).

Somekawa H, Singh A, Mukai T
Microstructure evolutions of Mg-Zn binary alloy during direct extrusion process
SCRIPTA MATERIALIA, 60, 411- 414, (2009).

Somekawa H, Singh A, Mukai T
Fracture mechanism of a coarse-grained magnesium alloy during fracture toughness testing
PHILOSOPHICAL MAGAZINE LETTERS, 89, 2-10, (2009).

Chen YM, Ohkubo T, Mukai T, Hono K
Structure of shear bands in Pd40Ni40P20 bulk metallic glass
JOURNAL OF MATERIALS RESEARCH, 24, 1-9, (2009).

Hiromoto S, Yamamoto A, Maruyama N, Somekawa H, Mukai T
Influence of pH and flow on the polarisation behavior of pure magnesium in borate buffer solutions
CORROSION SCIENCE, 50, 3561-3568, (2008).

Inoue T, Horita Z, Somekawa H, Ogawa K
Effect of initial grain sizes on hardness variation and strain distribution of pure aluminum severely deformed by compression tests
ACTA MATERIALIA, 56, 6291-6303, (2008).

Hiromoto S, Yamamoto A, Maruyama N, Somekawa H, Mukai T
Precipitation control of calcium phosphate on pure magnesium by anodization
CORROSION SCIENCE, 50, 2906-2913, (2008).

Watanabe H, Mukai T, Higashi K
Influence of temperature and grain size on threshold stress for superplastic flow in a fine-grained magnesium alloy
METALLURGICAL AND MATERIALS TRANSACTIONS, 39A, 2351-2362 (2008).

Somekawa H, Singh A, Osawa Y, Mukai T
High strength and fracture toughness balances in extruded Mg-Zn-RE alloys by dispersion of quasicrystalline phase particles
MATERIALS TRANSACTIONS, 49, 1947-1952, (2008).

Singh A, Somekawa H, Tsai AP
Interfaces made by tin with icosahedral phase matrix
SCRIPTA MATERIALIA, 59, 699-702, (2008).

Liu XB, Osawa Y, Takamori S, Mukai T
Grain refinement of AZ91 alloy by introducing ultrasonic vibration during solidification
MATERIALS LETTERS, 62, 2872-2875, (2008).

Singh A, Tsai AP
Quasicrystal-crystal interfaces in bulk materials
JOURNAL OF PHYSICS: CONDENSED MATTER, 20, 314002, (2008).

Liu XB, Osawa Y, Takamori S, Mukai T
Microstructure and mechanical properties of AZ91 alloy produced with ultrasonic vibration
MATERIALS SCIENCE AND ENGINEERING A, 487, 120-123, (2008).

Hiromoto S, Yamamoto A, Maruyama N, Somekawa H, Mukai T
Polarization behavior of pure magnesium under a controlled flow in a NaCl solution
MATERIALS TRANSACTIONS, 49, 1456-1461, (2008).

Takamori S, Osawa Y, Kimura T, Liu XB, Mukai T
Casting surface of AZ91 alloy and its reaction with sand mold
MATERIALS TRANSACTIONS, 49, 1089-1092, (2008).

Osawa Y, Liu XB, Takamori S, Somekawa H, Mukai T
Effect of ultrasonic vibration pretreatment on microstructural evolution and mechanical properties of extruded AZ91 alloy
MATERIALS TRANSACTIONS, 49, 972-975, (2008).

Takara A, Chian LF, Chung SW, Somekawa H, Watanabe H, Takigawa Y, Higashi K
Suppression of macroscopic defects through the control of friction between workpiece and dies in a forged magnesium alloy part with ribs
MATERIALS TRANSACTIONS, 49, 898-902, (2008).

Somekawa H, Osawa Y, Singh A, Mukai T
Effect of precipitate volume fraction in fracture toughness of extruded Mg-Zn alloys
JOURNAL OF MATERIALS RESEARCH, 23, 1128-1135, (2008).

Srinivasarao B, Oh-ishi K, Ohkubo T, Mukai T, Hono K
Synthesis of high-strength bimodally grained iron by mechanical alloying and spark plasma sintering
SCRIPTA MATERIALIA, 58, 759-762, (2008).

Somekawa H, Maruyama N, Hiromoto S, Yamamoto A, Mukai T
Fatigue Behaviors and Microstructures in an Extruded Mg-Al-Zn Alloy
MATERIALS TRANSACTIONS, 49, 681-684, (2008).

Liu YZ, Minagawa K, Kakisawa H, Halada K
Melt film formation and disintegration during novel atomization process
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 17, 1276-1281, (2007).

Liu XB, Osawa Y, Takamori S, Yang GC
Thermal stability of decagonal quasicrystal prepared from undercooled Al72Ni12Co16 alloy melt
MATERIALS LETTERS, 61, 5164-5168, (2007).

Singh A, Guo JQ, Tsai AP
Stability and diffraction features of quasicrystal and 2/1 approximant phase in an Au42In42Yb16 alloy
MATERIALS SCIENCE AND ENGINEERING A, 449, 991-994, (2007).

Osawa Y, Takamori S, Kimura T, Minagawa K, Kakisawa H
Morphology of intermetallic compounds in Al-Si-Fe alloy and its control by ultrasonic vibration
MATERIALS TRANSACTIONS, 48, 2467-2475, (2007).

Somekawa H, Mukai T
Effect of dominant diffusion process on cavitation behavior in superplastic Mg-Al-Zn alloy
SCRIPTA MATERIALIA, 57, 1008-1011, (2007).

Singh A, Tsai AP
Structural characteristics of b1 precipitates in Mg-Zn-based alloys
SCRIPTA MATERIALIA, 57, 941-944, (2007).

Somekawa H, Kim HS, Singh A, Mukai T
Fracture toughness in direct extruded Mg-Al-Zn alloys
JOURNAL OF MATERIALS RESEARCH, 22, 2598-2607, (2007).

Ohkubo T, Nagahama D, Mukai T, Hono K
Stress-strain behaviors of Ti-based bulk metallic glass and their nanostructures
JOURNAL OF MATERIALS RESEARCH, 22, 1406-1413, (2007).

Mondal K, Kumar G, Ohkubo T, Oishi K, Mukai T, Hono K
Large apparent compressive strain of metallic glasses
PHILOSOPHICAL MAGAZINE LETTERS, 87, 625-635, (2007).

Sasaki TT, Mukai T, Hono K
High-strength bulk nanocrystalline Al-Fe alloy processed by mechanical alloying and spark plasma sintering
SCRIPTA MATERIALIA, 57, 189-192, (2007).

Kumar G, Mukai T, Hono K
Plasticity and microstructure of Zr-Cu-Al bulk metallic glasses
SCRIPTA MATERIALIA, 57, 173-176, (2007).

Somekawa H, Singh A, Mukai T
Synergetic effect of grain refinement and spherical shaped precipitate dispersions in fracture toughness of a Mg-Zn-Zr alloy
MATERIALS TRANSACTIONS, 48, 1422-1426, (2007).

Mondal K, Ohkubo T, Mukai T, Hono K
Glass forming ability and mechanical properties of quinary Zr-based bulk metallic glasses
MATERIALS TRANSACTIONS, 48, 1322-1326, (2007).

Somekawa H, Mukai T
High strength and fracture toughness balance on the extruded Mg-Ca-Zn alloy
MATERIALS SCIENCE AND ENGINEERING A, 459, 366-370, (2007).

Somekawa H, Singh A, Mukai T
High fracture toughness of extruded Mg-Zn-Y alloy by synergetic effect of grain refinement and dispersion of quasicrystal phase
SCRIPTA MATERIALIA, 56, 1091-1094, (2007).

Takamori S, Kakisawa H, Minagawa K, Osawa Y, Halada K
Evaluation of damping property of aluminum-alloyed cast iron by several methods
MATERIALS SCIENCE FORUM, 539-543, 4861-4865, (2007).

Osawa Y, Takamori S, Minagawa K, Kakisawa H, Halada K
Controlling of the Solidification Structure for Recycling by Ultrasonic vibration
MATERIALS SCIENCE FORUM, 539-543, 2345-2350, (2007).

Minagawa K, Kakisawa H, Osawa Y, Takamori S, Halada K
Application of 3-Dimensional Powder Laminating Fabrication to Metallic Components
MATERIALS SCIENCE FORUM, 539-543, 2333-2338, (2007).

Kakisawa H, Minagawa K, Takamori S, Osawa Y, Halada K
Fracture behavior of nano-laminar ceramics matrix composite
MATERIALS SCIENCE FORUM, 539-543, 883-888, (2007).

Singh A, Somekawa H, Mukai T
Compressive strength and yield asymmetry in extruded Mg-Zn-Ho alloys containing quasicrystal phase
SCRIPTA MATERIALIA, 56, 935-938, (2007).

Somekawa H, Singh A, Mukai T
Effect of precipitate shapes on fracture toughness in extruded Mg-Zn-Zr magnesium alloys
JOURNAL OF MATERIALS RESEARCH, 22, 965-973, (2007).

Singh A, Tsai AP
Interfaces of bismuth with Al-Cu-Fe icosahedral quasicrystal
PHILOSOPHICAL MAGAZINE LETTERS, 87, 85-94, (2007).

Liu XB, Takamori S, Osawa Y
Effect of matrix structure on ultrasonic attenuation of ductile cast iron
JOURNAL OF MATERIALS SCIENCE, 42, 179-184, (2007).

Watanabe H, Mukai T, Ishikawa K
Effect of temperature of differential speed rolling on room temperature mechanical properties and texture in an AZ31 magnesium alloy
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 182, 644-647, (2007).

Hirai K, Somekawa H, Takigawa Y, Higashi K
Superplastic forging with dynamic recrystallization of Mg-Al-Zn alloys cast by thixo-molding
SCRIPTA MATERIALIA, 56, 237-240, (2007).

皆川和己, 垣澤英樹, 大澤嘉昭, 高森晋, 原田幸明
ハイブリッド噴霧法による金属微細球状粉末の創製
粉体および粉末冶金, 53, 341-345, (2006).

大澤嘉昭, 高森晋, 木村隆, 皆川和己, 垣澤英樹
Al-Si-Fe合金の凝固組織と超音波振動による組織制御
鋳造工学, 78, 65-70, (2006).

Liu XB, Takamori S, Osawa Y, Yin F
Diffraction correction in the measurement of ultrasonic attenuation
MATERIALS SCIENCE AND ENGINEERING A, 442, 527-531, (2006).

Fukuhara M, Yin FX, Osawa Y, Takamori S
High-damping properties of Mn-Cu sintered alloys
MATERIALS SCIENCE AND ENGINEERING A, 442, 439-443, (2006).

Somekawa H, Osawa Y, Mukai T
Effect of solid-solution strengthening on fracture toughness in extruded Mg-Zn alloys
SCRIPTA MATERIALIA, 55, 593-596, (2006).

Takamori S, Osawa Y, Liu XB, Kimura T
Surface modification of cast iron containing 6 mass% aluminum and its wear property
MATERIALS TRANSACTIONS, 47, 1501-1507, (2006).

Somekawa H, Mukai T
Fracture toughness in an extruded ZK60 magnesium alloy
MATERIALS TRANSACTIONS, 47, 995-998, (2006).

Osawa Y, Takamori S, Minagawa K, Kakisawa H, Halada K
Advanced processing for recycling of iron scrap with impurities
NUKLEONIKA, 51, S113-S119, (2006).

Minagawa K, Kakisawa H, Takamori S, Osawa Y, Halada K
Hybrid atomization method suitable for production of fine spherical lead-free solder powder
NUKLEONIKA, 51, S83-S88, (2006).

Somekawa H, Mukai T
Fracture toughness in a rolled AZ31 magnesium alloy
JOURNAL OF ALLOYS AND COMPOUNDS, 417, 209-213, (2006).

Somekawa H, Singh A, Mukai T
Deformation structure after fracture-toughness test of Mg-Al-Zn alloys processed by equal-channel-angular extrusion
PHILOSOPHICAL MAGAZINE LETTERS, 86, 195-204 (2006).

Somekawa H, Mukai T
Fracture toughness in ultra fine-grained magnesium alloy
MATERIALS SCIENCE FORUM, 503-504, 155-160, (2006).

Singh A, Watanabe M, Kato A, Tsai AP
Strengthening effects of icosahedral phase in magnesium alloys
PHILOSOPHICAL MAGAZINE, 86, 951-956, (2006).

Somekawa H, Mukai T
Fracture toughness in Mg-Al-Zn alloy processed by equal-channel-angular extrusion
SCRIPTA MATERIALIA, 54, 633-638, (2006).

Mukai T, Miyoshi T, Nakano S, Somekawa H, Higashi K
Compressive response of a closed-cell aluminum foam at high strain rate
SCRIPTA MATERIALIA, 54, 533-537 (2006).

Singh A, Watanabe M, Kato A, Tsai AP
Strengthening in magnesium alloys by icosahedral phase
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 6, 895-901, (2005).

Tsujikawa M, Chung SW, Somekawa H, Higashi K
Influence of deformation mechanism on the superplastic forging of high-strength Mg alloy by three-dimensional finite volume simulation
MATERIALS TRANSACTIONS, 46, 3085-3088, (2005).

Umezawa O, Nakamoto M, Osawa Y, Suzuki K, Kimura S
Microstructural refinement of hyper-eutectic Al-Si-Fe-Mn cast alloys to produce a recyclable wrought material
MATERIALS TRANSACTIONS, 46, 2609-2615, (2005).

Kakisawa H, Minagawa K, Ida K, et al.
Dense P/M component produced by solid freeform fabrication (SFF)
MATERIALS TRANSACTIONS, 46, 2574-2581, (2005).

Kakisawa H, Minagawa K, Takamori S, Osawa Y
Fabrication of nano-laminar composite from glass flake
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 113, 808-811, (2005).

Tsujikawa M, Somekawa H, Chung SW, Higashi K
Development of constitutive equation on superplastic RS P/M Mg-Y-Zn alloy
MATERIALS TRANSACTIONS, 46, 2287-2290, (2005).

Somekawa H, Hirai K, Watanabe H, Takigawa Y, Higashi K
Dislocation creep behavior in Mg-Al-Zn alloys
MATERIALS SCIENCE AND ENGINEERING A, 407, 53-61, (2005).

Liu X, Takamori S, Osawa Y, Yin F
Damping characteristics of cast irons with aluminum addition
JOURNAL OF MATERIALS SCIENCE, 40, 5565-5567, (2005).

Singh A, Watanabe M, Kato A, Tsai AP
Twinning and the orientation relationships of icosahedral phase with the magnesium matrix
ACTA MATERIALIA, 53, 4733-4742, (2005).

Singh A, Tsai AP
A new orientation relationship OR4 of icosahedral phase with magnesium matrix in Mg-Zn-Y alloys
SCRIPTA MATERIALIA, 53, 1083-1087, (2005).

Somekawa H, Mukai T
Effect of grain refinement on fracture toughness in extruded pure magnesium
SCRIPTA MATERIALIA, 53, 1059-1064, (2005).

Minagawa K, Kakisawa H, Osawa, Y, Takamori S, Halada K
Production of fine spherical lead-free solder powders by hybrid atomization
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 6, 325-329, (2005).

Hirai K, Somekawa H, Takigawa Y, Higashi K
Effects of Ca and Sr addition on mechanical properties of a cast AZ91 magnesium alloy at room and elevated temperature
MATERIALS SCIENCE AND ENGINEERING A, 403, 276-280, (2005).

Zhang, HW, Gopalan R, Mukai T, Hono K
Fabrication of,bulk nanocrystalline Fe-C alloy by spark plasma sintering of mechanically milled powder
SCRIPTA MATERIALIA, 53, 863-868, (2005).

Oh JC, Ohkubo T, Mukai T, Hono K
TEM and 3DAP characterization of an age-hardened Mg-Ca-Zn alloy
SCRIPTA MATERIALIA, 53, 675-679, (2005).

Somekawa H, Mukai T
Effect of texture on fracture toughness in extruded AZ31 magnesium alloy
SCRIPTA MATERIALIA, 53, 541-545, (2005).

Suwa Y, Mukai T, Aizawa T
Computational study of compressive mechanical response in two-dimensional cellular solids under microstructural control
MATERIALS TRANSACTIONS, 46, 1221-1229, (2005).

Singh A, Watanabe M, Kato A, Tsai AP
Crystallographic orientations quasicrystalline phase growing on and interfaces of icosahedral cubic W phase in Mg-Zn-Y alloys
MATERIALS SCIENCE AND ENGINEERING A, 397, 22-34, (2005).

Watanabe H, Somekawa H, Higashi K
Fine-grain processing by equal channel angular extrusion of rapidly quenched bulk Mg-Y-Zn alloy
JOURNAL OF MATERIALS RESEARCH, 20, 93-101, (2005).

Ishikawa K, Watanabe H, Mukai T
High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures
MATERIALS LETTERS, 59, 1511-1515, (2005).

Takigawa Y, Somekawa H, Higashi K
High-temperature plastic flow in pre-annealed Zr-Al-Ni-Cu bulk metallic glass in a supercooled liquid region
MATERIALS TRANSACTIONS, 46, 199-202, (2005).

Liu XB, Takamori S, Osawa Y, Yin F
Low-temperature damping behavior of cast iron with aluminum addition
JOURNAL OF MATERIALS SCIENCE, 40, 1773-1775, (2005).

Ishikawa K, Watanabe H, Mukai T
High temperature compressive properties over a wide range of strain rates in an AZ31 magnesium alloy
JOURNAL OF MATERIALS SCIENCE, 40, 1577-1582, (2005).

Tantikom K, Aizawa T, Mukai T
Symmetric and asymmetric deformation transition in the regularly cell-structured materials. Part I: experimental study
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 42, 2199-2210, (2005).

Watanabe H, Takara A, Somekawa H, Mukai T, Higashi K
Effect of texture on tensile properties at elevated temperatures in an AZ31 magnesium alloy
SCRIPTA MATERIALIA, 52, 449-454, (2005).

Kakisawa H, Minagawa K, Takamori S, Osawa Y, Halada K
Consolidation of Fe-Cu PM alloy for recycling of scrap iron
TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, 29, 1781-1784, (2004).

皆川和己, 垣澤英樹, 高森晋, 大澤嘉昭, 原田幸明
新しい噴霧技術による超微細鉛フリー粉末の製造
TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, 29, 2145-2148, (2004).

皆川和己, 井田慶介, 垣澤英樹, 高森晋, 大澤嘉昭, 林照剛, 前川克廣
粉末固着3次元積層造形法の金属成形品への適用
JOURNAL OF THE JAPAN SOCIETY OF POWDER AND POWDER METALLURGY, 51, 756-760, (2004).

高森晋, 大澤嘉昭, 劉新宝, 木村隆
Fe-Cu急速凝固合金粉末の温間強加工成形体の引張特性に及ぼす銅含有量の影響; アルミニウムを6mass％含有した鋳鉄の表面改質と耐摩耗性
JOURNAL OF JAPAN FOUNDARY ENGINEERING SOCIETY, 76, 760-766, (2004).

Singh A, Watanabe M, Kato A, Tsai AP
Microstructure and strength of quasicrystal containing extruded Mg-Zn-Y alloys for elevated temperature application
MATERIALS SCIENCE AND ENGINEERING A, 385, 382-396, (2004).

Liu XB, Takamori S, Osawa Y
The effect of aluminum addition on the damping capacity of cast iron
JOURNAL OF MATERIALS SCIENCE LETTER, 39, 6097-6099, (2004).

Singh A, Watanabe M, Kato A, Tsai AP
Formation of icosahedral-hexagonal H phase nano-composites in Mg-Zn-Y alloys
SCRIPTA MATERIALIA, 51, 955-960, (2004).

Takara A, Nishikawa Y, Watanabe H, Somekawa H, Mukai T, Higashi K
New forming process of three-dimensionally shaped magnesium parts utilizing high-strain-rate superplasticity
MATERIALS TRANSACTIONS, 45, 2531-2536, (2004).

Watanabe H, Mukai T, Higashi K
Deformation mechanism of fine-grained superplasticity in metallic materials expected from the phenomenological constitutive equation
MATERIALS TRANSACTIONS, 45, 2497-2502, (2004).

Takara A, Nishikawa Y, Watanabe H, Somekawa H, Mukai T, Higashi K
Secondary processing of AZ31 magnesium alloy concomitant with grain growth or dynamic recrystallization
MATERIALS TRANSACTIONS, 45, 2377-2382, (2004).

Watanabe H, Mukai T, Sugioka M, Ishikawa K
Elastic and damping properties from room temperature to 673 K in an AZ31 magnesium alloy
SCRIPTA MATERIALIA, 51, 291-295, (2004).

Somekawa H, Inoue A, Higashi K
Superplastic and diffusion bonding behavior on Zr-Al-Ni-Cu metallic glass in supercooled liquid region
SCRIPTA MATERIALIA, 50, 1395-1399, (2004).

Somekawa H, Nieh TG, Higashi K
Instrumented indentation properties of electrodeposited Ni-W alloys with different microstructures
SCRIPTA MATERIALIA, 50, 1361-1365, (2004).

Tsujikawa M, Somekawa H, Higashi K, Iwasaki H, Hasegawa T, Mizuta A
Fatigue of welded magnesium alloy joints
MATERIALS TRANSACTIONS, 45, 419-422, (2004).

Somekawa H, Tanaka T, Sasaki H, Kita K, Inoue A, Higashi K
Diffusion bonding in ultra fine-grained Al-Fe alloy indicating high-strain-rate superplasticity
ACTA MATERIALIA, 52, 1051-1059, (2004).

Chung SW, Somekawa H, Kinoshita T, Kim WJ, Higashi K
The non-uniform behavior during ECAE process by 3-D FVM simulation
SCRIPTA MATERIALIA, 50, 1079-1083, (2004).

Watanabe H, Mukai T, Ishikawa K
Differential speed rolling of an AZ31 magnesium alloy and the resulting mechanical properties
JOURNAL OF MATERIALS SCIENCE, 39, 1477-1480, (2004).

Watanabe H, Mukai T, Higashi K
Constitutive equation for superplastic flow in light metallic materials
MATERIALS SCIENCE FORUM, 447-4, 91-96, (2003).

Yin F, Takamori S, Osawa Y, Kawahara K
The damping behavior of a Ni-50 at.% Ti shape memory alloy
ZEITSCHRIFT FUR METALLKUNDE, 94, 1021-1026, (2003).

Hirata T, Mukai T, Saito N, et al.
Experimental prediction of deformation mechanism after continuous dynamic recrystallization in superplastic P/M7475
JOURNAL OF MATERIALS SCIENCE, 38, 3925-3932, (2003).

Somekawa H, Higashi K
The optimal surface roughness condition on diffusion bonding
MATERIALS TRANSACTIONS, 44, 1640-1643, (2003).

Minagawa K, Liu YZ, Kakisawa H, et al.
Production of fine metallic powders by hybrid atomization process
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 46, 260-264, (2003).

Kakisawa H, Minagawa K, Takamori S, Osawa Y, Halada K
Utilization of powder microstructure to strengthening of Fe-Cu alloy from rapidly solidified powder
JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 46, 255-259, (2003).

Singh A, Tsai AP, Nakamura M, Watanabe M, Kato A
Nanoprecipitates of icosahedral phase in quasicrystal-strengthened Mg-Zn-Y alloys
PHILOSOPHICAL MAGAZINE LETTERS, 83, 543-551, (2003).

Mukai T, Suresh S, Kita K, et al.
Nanostructured Al-Fe alloys produced by e-beam deposition: static and dynamic tensile properties
ACTA MATERIALIA, 51, 4197-4208, (2003).

Minagawa K, Liu YZ, Kakisawa H, Osawa Y, Takamori S, Halada K
Hybrid atomization process applied to fine lead-free solder powder production
MATERIALS TRANSACTIONS, 44, 1316-1319, (2003)

Kakisawa H, Minagawa K, Takamori S, Osawa Y, Halada K
Effect of consolidation process on tensile properties of Fe-CuP/M alloy from rapidly solidified powder
MATERIALS TRANSACTIONS, 44, 1311-1315, (2003).

Singh A, Nakamura M, Wantanabe M, Kato A, Tsai AP
Quasicrystal strengthened Mg-Zn-Y alloys by extrusion
SCRIPTA MATERIALIA, 49, 417-422, (2003).

Kakisawa H, Minagawa K, Kimura T, et al.
Effect of consolidating temperature on strengthening mechanism in Fe-Cu alloy from rapidly solidified powder
MATERIALS SCIENCE AND TECHNOLOGY, 19, 743-748, (2003).

Kakisawa H, Minagawa K, Takamori S, Osawa Y, Halada K
A new powder metallurgical process for upgrading recycling of Fe-Cu alloy
MATERIALS SCIENCE FORUM, 426-4, 4259-4264, (2003).

Osawa Y, Takamori S, Minagawa K, Kakisawa H, Halada K
Ecomaterial processing for recycling of iron scrap containing impurities
MATERIALS SCIENCE FORUM, 426-4, 3347-3352, (2003).

Minagawa K, Liu YZ, Kakisawa H, Takamori S, Osawa Y, Halada K
Production of fine uniform lead-free solder powders by hybrid atomization
MATERIALS SCIENCE FORUM, 426-4, 3341-3346, (2003).

Takamori S, Osawa Y, Kakisawa H, Halada K
Aluminum alloyed cast iron as an ecomaterial
MATERIALS SCIENCE FORUM, 426-4, 3305-3310, (2003).

Sasaki T, Somekawa H, Takara A, Nishikawa Y, Higashi K
Plane-strain fracture toughness on thin AZ31 wrought magnesium alloy sheets
MATERIALS TRANSACTIONS, 44, 986-990, (2003).

Singh A, Tsai AP
On the cubic W phase and its relationship to the icosahedral phase in Mg-Zn-Y alloys
SCRIPTA MATERIALIA, 49, 143-148, (2003).

Watanabe H, Moriwaki K, Mukai T, Ohsuna T, Hiraga K, Higashi K
Materials processing for structural stability in a ZK60 magnesium alloy
MATERIALS TRANSACTIONS, 44, 775-781, (2003).

Somekawa H, Watanabe H, Higashi K
The grain size dependence on diffusion bonding behavior in superplastic Mg alloys
MATERIALS TRANSACTIONS, 44, 496-503, (2003).

Watanabe H, Mukai T, Kamado S, Kojima Y, Higashi K
Mechanical properties of Mg-Y-Zn alloy processed by equal-channel-angular extrusion
MATERIALS TRANSACTIONS, 44, 463-467, (2003).

Watanabe H, Mukai T, Ishikawa K; et al.
Superplastic behavior of an ECAE processed ZK60 magnesium alloy
MATERIALS SCIENCE FORUM, 419-4, 557-562, (2003).

Kobayashi T, Koike J, Mukai T, et al.
Anomalous activity of nonbasal dislocations in AZ31 Mg alloys at room temperature
MATERIALS SCIENCE FORUM, 419-4, 231-236, (2003).

Mukai T, Watanabe H, Ishikawa K, et al.
Guide for enhancement of room temperature ductility in Mg alloys at high strain rates
MATERIALS SCIENCE FORUM, 419-4, 171-176, (2003).

Liu YZ, Minagawa K, Kakisawa H; et al.
Hybrid Atomization: Processing parameters and disintegration modes
INTERNATIONAL JOURNAL OF POWDER METALLURGY, 39, 29-37, (2003).

Koike J, Kobayashi T, Mukai T, Watanabe H, Suzuki M, Maruyama K, Higashi K
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
ACTA MATERIALIA, 51, 2055-2065, (2003).

Somekawa H, Watanabe H, Mukai T, Higashi K
Low temperature diffusion bonding in a superplastic AZ31 magnesium alloy
SCRIPTA MATERIALIA, 48, 1249-1254, (2003).

Kakisawa H, Minagawa K, Halada K
Tensile behavior change depending on the microstructure of a Fe-Cu alloy produced from rapidly solidified powder
MATERIALS SCIENCE AND ENGINEERING A, 340, 175-180, (2003).

Somekawa H, Hosokawa H, Watanabe H, Higashi K
Diffusion bonding in superplastic magnesium alloys
MATERIALS SCIENCE AND ENGINEERING A, 339, 328-333, (2003).

Mukai T, Nieh TG, Kawamura Y; et al.
Effect of strain rate on compressive behavior of a Pd40Ni40P20 bulk metallic glass
INTERMETALLICS, 10, 1071-1077, (2002).

Kanahashi H, Mukai T, Nieh TG; et al.
Effect of cell size on the dynamic compressive properties of open-celled aluminum foams
MATERIALS TRANSACTIONS, 43, 2548-2553, (2002).

Singh A, Divakar R, Raghunathan VS; et al.
Nano-quasicrystalline phase formation in Mg-Cd-Yb alloys
JOURNAL OF ALLOYS AND COMPOUNDS, 342, 261-264, (2002).

Miyoshi T, Mukai T, Higashi K
Energy absorption in closed-cell Al-Zn-Mg-Ca-Ti foam
MATERIALS TRANSACTIONS, 43, 1778-1781, (2002).

Watanabe H, Mukai T, Ishikawa K, Higashi K
Low temperature superplasticity of a fine-grained ZK60 magnesium alloy processed by equal-channel-angular extrusion
SCRIPTA MATERIALIA, 46, 851-856, (2002).

Mukai T, Nieh TG, Kawamura Y; et al.
Dynamic response of a Pd40Ni40P20 bulk metallic glass in tension
SCRIPTA MATERIALIA, 46, 43-47, (2002).

Yin FX, Takamori S, Ohsawa Y, Sato A, Kawahara K
The effects of static strain on the damping capacity of high damping alloys
MATERIALS TRANSACTIONS, 43, 466-469, (2002).

Takamori S, Osawa Y, Halada K
Aluminum-alloyed cast iron as a versatile alloy
MATERIALS TRANSACTIONS, 43, 311-314, (2002).

Kakisawa H, Minagawa K, Otaguchi M, et al.
Deformation and fracture mechanism of consolidated Fe-Cu alloy from rapidly solidified powder
MATERIALS TRANSACTIONS, 43, 301-304, (2002).

Watanabe H, Mukai T, Ishikawa K, Higashi K
High-strain-rate superplasticity in an AZ91 magnesium alloy processed by ingot metallurgy route
MATERIALS TRANSACTIONS, 43, 78-80, (2002).

Ranganathan S, Singh A, Tsai AP
Frank's 'cubic' hexagonal phase: an intermetallic cluster compound as an example
PHILOSOPHICAL MAGAZINE LETTERS, 82, 13-19, (2002).