K. Maruyama and J. S. Lee, “Causes of
overestimation of creep rupture strength in 11Cr-2W-0.3Mo-CuVNb steel”, Creep &
Fracture in High Temperature Components ? Design & Life, Assessment Issues,
Edited by I.A. Shibli, S.R. Holdsworth and G. Merckling, Destech Publications,
Lancaster, PA, UAS, (2005), pp.372-379.
J. S. Lee, K. Maruyama, I. Nonaka and
T. Ito, “Mechanism of Type IV Failure in Weldment of a Mod. 9Cr-1Mo Steel” Creep
Deformation and Fracture, Design, and Life Extension (Materials Science
&Technology 2005), Edited by R.S. Mishra, J. C .Earthman, S. V. Raj, and R.
Viswanathan, TMS, Warrendale, (2005), pp.139-148.
J. S. Lee, H. Ghassemi Armaki, K.
Maruyama, T. Muraki and H. Asahi, “Proceedings
of Liege Conference”, September
18-20, 2006.
K.
Yagi , “Risk-based Use of Advanced Structural Steels in Thermal Power Plants”,
Proceedings of Symposium on Ultla Super Critical (USC) Steels for Fossil Power
Plants 2005, (2005), Beijing, pp.111-123.
K. Yagi, “Risk-based Application of
Advanced Structural Steels in Power Plants”, Proceedings of International
Workshop on Performance and Requirements of Structural Materials for Modern High
Efficient Power Plants, (2005), Darmstadt, pp.178-204.
K. Yagi, “Development of
Materials Risk Information Platform”, Proceedings on MITS 2006 International
Conference on Materials Databases, (2006), Tokyo, pp.51-57.
K. Yagi, “Development of Materials
Risk Information Platform”, Proceedings of International Symposium on Risk,
Economy and safety, failure Minimisation and Analysis, FAILURES 2006, (2006),
Gordon's Bay.
小野嘉則,
由利哲美,
竹内悦男,
松岡三郎,
緒形俊夫,
沖田耕一,
堀秀輔, “ロケットエンジン用材料の極低温高サイクル疲労特性に及ぼすショットピーニングの影響”,
2005年春期大会
日本金属学会講演概要, (2005)
由利哲美, 小野嘉則, 緒形俊夫, “Ti-6Al-4V
ELI合金の極低温疲労特性に及ぼす微小切欠きの影響”, 2005年度春季低温工学・超電導学会講演概要集, 72, 190-, (2005)
由利哲美,
小野嘉則,
緒形俊夫, “極低温におけるTi-5Al-2.5Sn
ELI合金の疲労き裂伝播試験”,
低温工学・超電導学会講演概要集,
(2005)
N. Komai, and K. Kimura：“Considerations
of Material Risk in Creep Rupture Tests of mod.9Cr-1Mo Steel Weldments”, 2nd
International Workshop on Risk-based Engineering, December 12-13, 2005
K. Kimura, “A method of
long-term creep rupture data analysis for high Cr ferritic creep resistant
steel”, Proc. Symp. Ultra Super Critical Steels for Fossil Power Plants 2005,
Beijing, China, (2005), pp.145-156.
K. Kimura, “Assessment of
Long-term Creep Strength and Review of Allowable Stress of High Cr Ferritic
Creep Resistant Steels”, Proc. of PVP2005, July 17-21, 2005, Denver, Colorado,
USA, (2005).
K. Kimura, K. Sawada and H.
Kushima, “Microstructural stability and degradation behaviour of 12Cr ferritic
creep resistant steels”, Proc. Int. Workshop Performance and Requirements of
Structural Materials for Modern High Efficient Power Plants, Sep. 6-7, 2005,
Darmstadt, Germany, (2005), pp.81-95.
K. Sawada, H. Kushima and K.
Kimura, “Precipitation behavior of Z phase during aging and creep in 9-12%Cr
ferritic heat resistant steels”, Proc. Int. Workshop Performance and
Requirements of Structural Materials for Modern High Efficient Power Plants,
Sep. 6-7, 2005, Darmstadt, Germany, (2005), pp.96-104.
M. Yoshino, Y. Mishima, K.
Sawada, Y. Toda, H. Kushima and K. Kimura, “Precipitation behaviour of MX
carbonitride in high Cr ferritic steels”, Proc. Int. Workshop Performance and
Requirements of Structural Materials for Modern High Efficient Power Plants,
Sep. 6-7, 2005, Darmstadt, Germany, (2005), pp.127-138.
K. Kimura, “Review of Allowable
Stress and New Guideline of Long-term Creep Strength Assessment for High Cr
Ferritic Creep Resistant Steels”, Proc. Int. Conf. Creep & Fracture in High
Temperature Components Design & Life Assessment Issues, Sep.12-14, 2005, London,
UK, (2005), pp.1009-1022.
H. Miyazaki and K. Kimura,
“Degradation of Type PR and R Thermocouples during Long-term Creep Test”, Proc.
Int. Conf. Creep & Fracture in High Temperature Components Design & Life
Assessment Issues, Sep.12-14, 2005, London, UK, (2005), pp.314-325.
H. Kushima, T. Watanabe, M.
Murata, K. Kamihira, H. Tanaka and K. Kimura, “Metallographic Atlas for
2.25Cr-1Mo Steels and Degradation due to Long-term Service at the Elevated
Temperatures”, Proc. Int. Conf. Creep & Fracture in High Temperature Components
Design & Life Assessment Issues, Sep.12-14, 2005, London, UK, (2005),
pp.223-234.
M. Yoshino, Y. Mishima, Y. Toda,
H. Kuishima, K. Sawada and K. Kimura, “Influence of Normalizing Heat Treatment
on Precipitation Behavior in Modified 9Cr-1Mo Steel”, Proc. Int. Conf. Creep &
Fracture in High Temperature Components Design & Life Assessment Issues,
Sep.12-14, 2005, London, UK, (2005), pp.153-164.
K. Kimura, K. Sawada, H. Kushima
and Y. Toda, “Assessment of Long-term Creep Strength of High Cr Ferritic Creep
Resistant Steels with Region Splitting Method”, Proc. OPE2006 Chennai, Feb.7-9,
2006, Chennai, India, (2006).
田中秀雄、村田正治、上平一茂、山崎政義、木村一弘、阿部冨士雄：SUS347鋼の長時間クリープ注の析出挙動、日本鉄鋼協会第150回秋季講演大会、広島大学
September 29, 2005.
H. Tanaka, M. Murata and F. Abe :
“Heat-to-Heat Variation in Creep Life for Stainless Steels Based on NIMS,
Metallographic Atlas”, 2nd International Workshop on Risk Based Engineering,
Dec. 12-13, 2005, Nagoya, Japan
田中秀雄、村田正治、上平一茂、山崎政義、木村一弘、阿部冨士雄：SUS347鋼の長時間クリープ注の析出挙動、耐熱金属材料123委員会研究報、March 6-7,
2006.
J. Nobe: “Activities in NIMS
Material Risk Information Platform Development Project” , 2nd International
Workshop on Risk Based Engineering, Dec. 12-13, 2005, Nagoya, Japan
K. Yagi: “New Materials Concepts
for High Efficiency and Low Risk Exploitation of Energy”, Rhine-Ruhr
International Materials Conference, (2005), Essen
K. Yagi: “Development of New
Materials for High Temperature Industry - Development of materials”, acquisition
and public offering of materials data for sustainable society-, International
Seminar & Workshop on High Temperature Materials for Industry & Development of
Indigenous R&D Capability, (2005), Islamabad
小野嘉則, 由利哲美, 竹内悦男, 松岡三郎, 緒形俊夫,
沖田耕一, “堀秀輔ロケットエンジン用材料の極低温高サイクル疲労特性に及ぼすショットピーニングの影響”, 日本金属学会2005年春期大会,（社）日本金属学会,
March, 2005.
堀秀輔, 沖田耕一, 竹内悦男, 松岡三郎, 緒形俊夫,
“開発試験で使用した液体酸素タ一ボポンプのインジュ一サ翼の疲労余寿命評価”, 日本金属学会 2005春期大会シンポジウム, 日本金属学会, March,
2005.
由利哲美, 小野嘉則, 緒形俊夫, “Ti-6Al-4V
ELI合金の極低温疲労特性に及ぼす微小切欠きの影響”, 2005年度春季低温工学・超電導学会, 低温工学会, June, 2005.
由利哲美, 小野嘉則, 緒形俊夫,
“High-Cycle Fatigue Properties of Notched Specimens for Ti-6Al-4V ELI Alloy at
Cryogenic Temperatures”, CEC-ICMC-2005 (2005 Cryogenic Engineering Conference
and the Inte), CEC-ICMC, August, 2005.
由利哲美, 小野嘉則, 緒形俊夫, “Effect of
Test Frequency on Fatigue Crack Growth Rates of Ti-6Al-4V ELI Alloy at Cryogenic
Temperature”, CEC-ICMC-2005(2005 Cryogenic Engineering Conference and the Inte,
CEC-ICMC, August, 2005.
小野嘉則, 由利哲美, 住吉英志, 竹内悦男, 松岡三郎,
緒形俊夫, “High-Cycle Fatigue Properties at Cryogenic Temperatures in INCONEL 718”,
CEC-ICMC-2005 (2005 Cryogenic Engineering Conference and Inte, CEC-ICMC,
August, 2005.
小野嘉則, 由利哲美, 住吉英志, 松岡三郎, 緒形俊夫,
“High-Cycle Fatigue Properties at Cryogenic Temperatures in Ti-5%Al-2.5%Sn Extra
Low Interstitial Alloy”, Euromat 2005, Czech Society for New Materials and
Technologies, Deutsche Gesel, September, 2005.
由利哲美, 小野嘉則, 緒形俊夫,
“極低温におけるTi-5Al-2.5Sn ELI合金の疲労き裂伝播試験”, 2005年秋季低温工学・超電導学会, 低温工学会, November, 2005.
H. Matsumoto, N. Komai and K.
Kimura： “Probabilistic Life Evaluation and Decision Making for High Temperature
Piping of Fossil Boilers”, API/PVRC Int. Conf. on Decision Making for Risk
Management of Process and Power Plants, Houston, TX， Oct. 18-20, 2005.
N. Komai and K. Kimura,
“Considerations of Material Risk in Creep Rupture Tests of mod.9Cr-1Mo Steel
Weldments”, 2nd International Workshop on Risk-based Engineering, December
12-13, 2005.
他、26件
(株)三菱総合研究所 ： 「社会リスク（材料と社会）に関する調査」 成果報告書（2006年1月）
