FY2005
Result Reports
Mitsubishi Research Institute ,
Inc. ：Report of “Research Related to Materials Risk (Materials and the
Public)", (2006.1）
High Pressure Institute of Japan,
The Allowable Stress Database Development Committee ：Report of “Allowable Stress
Database Development“,（2005.12）
The Iron and Steel Institute of
Japan, Safety Factor & Allowable Stress Research Committee ：Report (Vol. 4) of
"Rational Setting of Safety Factors and Allowable Stress",（2005.12.22）
Central Research Institute of
Electric Power Industry ： Research report (Vol. 5) of "Development of Equipment
Diagnostic Support System", (2006.1)
Mitsubishi Research Institute ,
Inc. ："Main Systems Development of Materials Risk information Platform", Result
report（2006.1）
Society of Non-Traditional
Technology, The Materials and System Safety Form：" FY2005 Report of Research
Related to Technology and Public Risk"
The University of Tokyo, Graduate
School of Engineering: "Maintenance of remaining life assessment database
for boiler equipments and turbine" , (2006.1)
Research Results Disclosed
Papers
T.
Ogata, S. Matsuoka,
“High-cycle Fatigue Properties of a Titanium Alloy at Cryogenic Temperatures”,
Advances in the Astronautical Sciences, 117(2004), pp.639-647,
Vol.1
T. Ogata, “It
learns on the accident. Cryogenic temperature fatigue of titanium
(H-2 Rocket-No.8)
”, MATERIA,
44(2005), 7, pp.548-553.
K.
Sawada, K. Miyahara, H. Kushima, K. Kimura and S. Matsuoka, “Contribution of
microstructural factor to hardness change during creep exposure in Mod.9Cr-1Mo
steel”, ISIJ International, 45(2005), pp.1934-1939.
Proceedings
K. Maruyama and J. S. Lee, “Causes of
overestimation of creep rupture strength in 11Cr-2W-0.3Mo-CuVNb steel”, Creep &
Fracture in High Temperature Components ? Design & Life, Assessment Issues,
Edited by I. A. Shibli, S.R. Holdsworth and G. Merckling, Destech Publications,
Lancaster, PA, UAS, (2005), pp.372-379.
J. S. Lee, K. Maruyama, I. Nonaka and
T. Ito, “Mechanism of Type IV Failure in Weldment of a Mod. 9Cr-1Mo Steel” Creep
Deformation and Fracture, Design, and Life Extension (Materials Science
&Technology 2005), Edited by R. S. Mishra, J. C .Earthman, S. V. Raj, and R.
Viswanathan, TMS, Warrendale, (2005), pp.139-148.
J. S. Lee, H. Ghassemi Armaki, K.
Maruyama, T. Muraki and H. Asahi, “Proceedings
of Liege Conference”, September
18-20, 2006.
K.
Yagi , “Risk-based Use of Advanced Structural Steels in Thermal Power Plants”,
Proceedings of Symposium on Ultla Super Critical (USC) Steels for Fossil Power
Plants 2005, (2005), Beijing, pp.111-123.
K. Yagi, “Risk-based Application of
Advanced Structural Steels in Power Plants”, Proceedings of International
Workshop on Performance and Requirements of Structural Materials for Modern High
Efficient Power Plants, (2005), Darmstadt, pp.178-204.
K. Yagi, “Development of
Materials Risk Information Platform”, Proceedings on MITS 2006 International
Conference on Materials Databases, (2006), Tokyo, pp.51-57.
K. Yagi, “Development of Materials
Risk Information Platform”, Proceedings of International Symposium on Risk,
Economy and safety, failure Minimisation and Analysis, FAILURES 2006, (2006),
Gordon's Bay.
Y. Ono, T. Yuri, E. Takeuchi, S.
Matsuoka, T. Ogata, K. Okita and H. Hori,
“Influence of shot peeling exerted on the cryogenic temperature quantity cycle
fatigue characteristic of the charge of rocket engine material”, Spring
Convention, March 2005, The Japan Institute of Metals, (2005).
T. Yuri, Y. Ono and T. Ogata, “IInfluence
of minute notch exerted on the cryogenic temperature fatigue characteristic of a
Ti-6AL-4V ELI Alloy”, Spring Meeting of Cryogenic Association of Japan, 72,
pp.190-, (2005)
T. Yuri, Y. Ono
and T. Ogata,
“The
fatigue crack propagation examination of the Ti-5aluminum-2.5Sn ELI alloy in
cryogenic temperature”, Cryogenic Association
of Japan, (2005)
N. Komai, and K. Kimura：“Considerations
of Material Risk in Creep Rupture Tests of mod.9Cr-1Mo Steel Weldments”, 2nd
International Workshop on Risk-based Engineering, December 12-13, 2005
K. Kimura, “A method of
long-term creep rupture data analysis for high Cr ferritic creep resistant
steel”, Proc. Symp. Ultra Super Critical Steels for Fossil Power Plants 2005,
Beijing, China, (2005), pp.145-156.
K. Kimura, “Assessment of
Long-term Creep Strength and Review of Allowable Stress of High Cr Ferritic
Creep Resistant Steels”, Proc. of PVP2005, July 17-21, 2005, Denver, Colorado,
USA, (2005).
K. Kimura, K. Sawada and H.
Kushima, “Microstructural stability and degradation behaviour of 12Cr ferritic
creep resistant steels”, Proc. Int. Workshop Performance and Requirements of
Structural Materials for Modern High Efficient Power Plants, Sep. 6-7, 2005,
Darmstadt, Germany, (2005), pp.81-95.
K. Sawada, H. Kushima and K.
Kimura, “Precipitation behavior of Z phase during aging and creep in 9-12%Cr
ferritic heat resistant steels”, Proc. Int. Workshop Performance and
Requirements of Structural Materials for Modern High Efficient Power Plants,
Sep. 6-7, 2005, Darmstadt, Germany, (2005), pp.96-104.
M. Yoshino, Y. Mishima, K.
Sawada, Y. Toda, H. Kushima and K. Kimura, “Precipitation behaviour of MX
carbonitride in high Cr ferritic steels”, Proc. Int. Workshop Performance and
Requirements of Structural Materials for Modern High Efficient Power Plants,
Sep. 6-7, 2005, Darmstadt, Germany, (2005), pp.127-138.
K. Kimura, “Review of
Allowable Stress and New Guideline of Long-term Creep Strength Assessment for
High Cr Ferritic Creep Resistant Steels”, Proc. Int. Conf. Creep & Fracture in
High Temperature Components Design & Life Assessment Issues, Sep.12-14, 2005,
London, UK, (2005), pp.1009-1022.
H. Miyazaki and K. Kimura,
“Degradation of Type PR and R Thermocouples during Long-term Creep Test”, Proc.
Int. Conf. Creep & Fracture in High Temperature Components Design & Life
Assessment Issues, Sep.12-14, 2005, London, UK, (2005), pp.314-325.
H. Kushima, T. Watanabe, M.
Murata, K. Kamihira, H. Tanaka and K. Kimura, “Metallographic Atlas for
2.25Cr-1Mo Steels and Degradation due to Long-term Service at the Elevated
Temperatures”, Proc. Int. Conf. Creep & Fracture in High Temperature Components
Design & Life Assessment Issues, Sep.12-14, 2005, London, UK, (2005),
pp.223-234.
M. Yoshino, Y. Mishima, Y.
Toda, H. Kushima, K. Sawada and K. Kimura, “Influence of Normalizing Heat
Treatment on Precipitation Behavior in Modified 9Cr-1Mo Steel”, Proc. Int. Conf.
Creep & Fracture in High Temperature Components Design & Life Assessment Issues,
Sep.12-14, 2005, London, UK, (2005), pp.153-164.
K. Kimura, K. Sawada, H.
Kushima and Y. Toda, “Assessment of Long-term Creep Strength of High Cr Ferritic
Creep Resistant Steels with Region Splitting Method”, Proc. OPE2006 Chennai,
Feb.7-9, 2006, Chennai, India, (2006).
Oral Presentations
H. Tanaka, S. Murata, K. Kamihira, M. Yamazaki, K. Kimura, F. Abe : “Deposit
action of the prolonged creep notes of SUS347 steel ", 150th Meeting of The Iron
and Steel Institute of Japan, Hiroshima University, September 29, 2005.
H. Tanaka, M. Murata and F. Abe :
“Heat-to-Heat Variation in Creep Life for Stainless Steels Based on NIMS,
Metallographic Atlas”, 2nd International Workshop on Risk Based Engineering,
Dec. 12-13, 2005, Nagoya, Japan
H. Tanaka, S. Murata, K. Kamihira, M. Yamazaki, K. Kimura and F. Abe, “Deposit
action of the prolonged creep notes of SUS347 steel ", Heat-resistant
metal material 123 committee research report, March 6-7, 2006.
J. Nobe: “Activities in NIMS
Material Risk Information Platform Development Project” , 2nd International
Workshop on Risk Based Engineering, Dec. 12-13, 2005, Nagoya, Japan
K. Yagi: “New Materials Concepts
for High Efficiency and Low Risk Exploitation of Energy”, Rhine-Ruhr
International Materials Conference, (2005), Essen
K. Yagi: “Development of New
Materials for High Temperature Industry - Development of materials”, acquisition
and public offering of materials data for sustainable society-, International
Seminar & Workshop on High Temperature Materials for Industry & Development of
Indigenous R&D Capability, (2005), Islamabad
Y. Ono, T. Yuri, E. Takeuchi,
S Matsuoka, T. Ogata and K. Okita and H. Hori, “Influence of shot peeling
exerted on the cryogenic temperature quantity cycle fatigue characteristic of
the charge of rocket engine material”
, Spring Convention, March
2005, The Japan Institute of Metals, (2005).
H. Hori, K. Okita, E.
Takeuchi, S. Matsuoka and T. Ogata,
“Fatigue life-expectancy evaluation of the inducer wings of liquid oxygen turbo
pump used by the development examination ”,
Spring Convention, March 2005, The Japan Institute of Metals, (2005).
T. Yuri, Y. Ono and T. Ogata,
“ Influence of minute notch exerted on the
cryogenic temperature fatigue characteristic of a Ti-6AL-4V ELI Alloy”,
Spring Meeting of Cryogenic Association of Japan, June, 2005.
T. Yuri, Y. Ono and T. Ogata,
“High-Cycle Fatigue Properties of Notched Specimens for Ti-6Al-4V ELI Alloy at
Cryogenic Temperatures”, CEC-ICMC-2005 (2005 Cryogenic Engineering Conference
and the Inte), CEC-ICMC, August, 2005.
T. Yuri, Y. Ono and T. Ogata, “Effect of
Test Frequency on Fatigue Crack Growth Rates of Ti-6Al-4V ELI Alloy at Cryogenic
Temperature”, CEC-ICMC-2005(2005 Cryogenic Engineering Conference and the Inte,
CEC-ICMC, August, 2005.
Y. Ono, T. Yuri, H. Sumiyoshi
S. Matsuoka, E. Takeuchi and T. Ogata, “High-Cycle Fatigue Properties at Cryogenic Temperatures in INCONEL 718”,
CEC-ICMC-2005 (2005 Cryogenic Engineering Conference and Inte, CEC-ICMC,
August, 2005.
Y. Ono, T. Yuri, H. Sumiyoshi
S. Matsuoka and T. Ogata,
“High-Cycle Fatigue Properties at Cryogenic Temperatures in Ti-5%Al-2.5%Sn Extra
Low Interstitial Alloy”, Euromat 2005, Czech Society for New Materials and
Technologies, Deutsche Gesel, September, 2005.
T. Yuri, Y. Ono and T. Ogata,
“The fatigue crack propagation examination of the Ti-5aluminum-2.5Sn ELI alloy
in cryogenic temperature”, Autumn Meeting,
Cryogenic Association of Japan, November, 2005.
H. Matsumoto, N. Komai and K.
Kimura： “Probabilistic Life Evaluation and Decision Making for High Temperature
Piping of Fossil Boilers”, API/PVRC Int. Conf. on Decision Making for Risk
Management of Process and Power Plants, Houston, TX, Oct. 18-20, 2005.
N. Komai and K. Kimura,
“Considerations of Material Risk in Creep Rupture Tests of mod.9Cr-1Mo Steel
Weldments”, 2nd International Workshop on Risk-based Engineering, December
12-13, 2005.
Others: 26 Reports
Commentaries
S. Okajima, A. Iwasaki, S. Izumi
and S. Sakai, “ Development of the on-line version thermal-power-generation
plant life-expectancy diagnostic system
” , PRESSURE TECHNOLOGY,
Vol.43(2005) No., pp.335-340.
K. Kimura, “ FY2005 The Technical Standard conformity Investigation Report
of the prolonged creep on-the-strength fall of High Chromium Steel ”,
(2005.3), Japan Power Engineering and Inspection Corporation
Patent
Filing
T. Ogata,
“The material-testing method by environmental atmosphere control
”,
Date of Filing ：2005.12.1, Application No.：2005/347397
T. Ogata, “The
material-testing method by environmental atmosphere control” ,
Date of Filing ：2005.12.1, Application
No.：2005/348398
K. Kimura, M. Yoshino, K. Sawada, H. Kushima and Y. Toda, “The ferrite
heat resistance steel which has tempering martensitic structure, and its
manufacture method ”,
Date of Filing ：2005.2.28, Application No.：2005/054520
Book
F. Abe; NIMS Creep Data Sheet, Detailed Organization Photograph Collection of Long-Term
Creep Tests Materials (SUS321HTB),
No.M-5, (2005.3))
