Tetsuo Uchikoshi

Uchikoshi's Publications

OriginalPapers

T. Uchikoshi, T. S. Suzuki, F. Tang, H. Okuyama and Y. Sakka, “Crystalline-oriented TiO₂ fabricated by the electrophoretic deposition in a strong magnetic field,” Ceram.Int., (in press)

T. Uchikoshi, T. S. Suzuki, F. Tang and Y. Sakka, “Fabrication of crystalline-oriented TiO₂ by electrophoretic deposition in a strong magnetic field,” Trans. Mat. Res. Soc. Jpn., (in press)

T. Uchikoshi, T. S. Suzuki, H. Okuyama and Y. Sakka, “Control of crystalline texture in polycrystalline alumina ceramics by electrophoretic deposition in a strong magnetic field,” J. Mater. Res. 19[5], 1487-1491 (2004).

F. Tang, K. Ozawa T. Uchikoshi and Y. Sakka, “Dispersion of titania aqueous suspensions with polyethyleneimine polyelectrolyte,” J. Ceram. Soc. Jpn., Suppl. 112[5], S950-S953 (2004).

T. Uchikoshi and Y. Sakka, “Electrophoretic deposition characteristics of alumina particles in aqueous media,” J. Ceram. Soc. Jpn., Suppl., 112[5], S63-S66 (2004).

T. Uchikoshi, T. S. Suzuki, H. Okuyama and Y. Sakka, “Fabrication of textured alumina by electrophoretic deposition in a strong magnetic field,” J. Mater. Sci. 39, 861-865 (2004).

F. Tang, H. Fudouzi and T. Uchikoshi and Y. Sakka, “Preparation of porous materials with controlled pore size and porosity,” J. Europ. Ceram. Soc., 24[2], 341-344 (2004).

T. Uchikoshi, T. S. Suzuki, H. Okuyama, Y. Sakka and P. S. Nicholson, “Electrophoretic deposition of alumina suspension in a strong magnetic field,” J. Europ. Ceram. Soc., 24[2], 225-229 (2004).

奥山秀男, 宇田雅広, 打越哲郎, 鈴木　達, 目　義雄, “Nb-Zr-Fe合金の水素吸収による粉化現象,” 粉体および粉末冶金, 50[10], 792-797 (2003).

T. Uchikoshi, T. S. Suzuki, H. Okuyama and Y. Sakka, “Electrophoretic deposition of alumina suspension in a strong magnetic field,” Proc. 6th. Meeting New Magneto-Science, TML Annnual Report Supplement II 2002 NIMS, 220-223 (2003).

F. Tang, H. Fudouzi, T. Uchikoshi, T. Awane and Y. Sakka, “Fabrication of ordered macroporous structures based on hetero-coagulation process using nanoparticle as building blocks,” Chem. Lett., 32[3], 276-277 (2003).

T. Uchikoshi, T. S. Suzuki, H. Okuyama and Y. Sakka, “Electrophoretic deposition of α-alumina particles in a strong magnetic field,” J. Mater. Res., 18[2], 254-256 (2003).

F. Tang, Y. Sakka and T. Uchikoshi, “Electrophoretic deposition of aqueous nanosized zinc oxide suspensions on a zinc electrode,” Mater. Res. Bull., 38[2], 207-212 (2003).

T. Uchikoshi, T. S. Suzuki, H. Okuyama, Y. Sakka and K. Kitazawa, “Electrophoretic deposition of alumina aqueous suspension in a strong magnetic field,” Electrophoretic Deposition: Fundamentals and Applications, ECS Proc. Vol. 2002-21, 9-14 (2002).

T. Uchikoshi, B. D. Hatton, Y. Sakka and P. S. Nicholson, “Electrical conductivity of 3Y-TZP/alumina laminate composite synthesized by electrophoretic deposition,” J. Ceram. Soc. Jpn., 110[10], 959-962 (2002).

打越哲郎, 久重哲郎, 目義雄, “ポリエチレンイミンによるイットリア微粒子水系サスペンションの安定化と電気泳動堆積挙動,” J. Ceram. Soc. Jpn., 110[9], 840-843 (2002).

F. Tang, T. Uchikoshi and Y. Sakka, “Electrophoretic deposition behavior of aqueous nanosized zinc oxide suspensions,” J. Am. Ceram. Soc., 85[9], 2161-2165 (2002).

Y. Sakka, H. Okuyama, T. Uchikoshi and S. Ohno, “Synthesis and characterization of Fe and composite Fe-TiN nanoparticles by dc arc-plasma,” J. Alloys and Compounds, 346, 285-291 (2002).

F. Tang, T. Uchikoshi, K. Ozawa and Y. Sakka, “Electrophoretic deposition of aqueous nano-g-Al2O3 suspensions,” Mater. Res. Bull., 37, 653-660 (2002).

F. Tang, T. Uchikoshi and Y. Sakka, “Rheological and electrophoretic deposition behavior of nano-ZnO powders in aqueous suspensions,” Trans. Mat. Res. Soc. Jpn., 27[1], 145-148 (2002).

Y. Sakka, T. S. Suzuki, K. Ozawa, T. Uchikoshi and K. Hiraga, “Sintering and ionic conductivity of Cuo-doped tetragonal ZrO₂ prepared by novel colloidal processing,” J. Ceram. Soc. Jpn., 109[12], 1004-1009 (2001).

Y. Sakka, K. Ozawa, T. Uchikoshi and K. Hiraga, “Collidal processing and ionic conductivity of fine-grained cupric-oxide-doped tetragonal zirconia,” J. Am. Ceram. Soc., 84[9], 2129-31 (2001).

T. Uchikoshi, V. Vasiliev and P. S. Nicholson, “Yttria coating of b-silicon nitride ceramics by a metal alkoxide method,” Ceram. Trans., 112, Ceramic Processing Science VI, 139-144 (2001).

Y. Sakka, B. D. Hatton and T. Uchikoshi, “Processing of Zirconia and Alumina Fine Particles through Electrophoretic Deposition,” Studies in Surface Sci. & Catal., 132, 343-46 (2001).

T. Uchikoshi, K. Ozawa, B. D. Hatton and Y. Sakka, “Dense, bubble-free ceramic deposits from aqueous suspensions by electrophoretic deposition,” J. Mater. Res., 16[2], 321-324 (2001).

Y. Sakka, T. S. Suzuki, T. Uchikoshi, K. Morita and K. Hiraga, “Superplasticity of Fine-Grained Zirconia-Based Ceramics Prepared by Colloidal Processing,” Proc. PM ’2000, 871-74 (2001).

打越哲郎, Y. Fukada, 鈴木達, P. S. Nicholson, “電気泳動堆積法による窒化ケイ素セラミックスの作製,” 粉体および粉末冶金, 47[9], 1021-1025 (2000).

目義雄, 打越哲郎, B. D. Hatton, “アルミナおよびジルコニア系サスペンションのスリップキャストと電気泳動堆積,” 粉体および粉末冶金, 47[9], 1015-1020 (2000).

T. Uchikoshi, K. Ozawa, B. D. Hatton and Y. Sakka, “Fabrication of bubble-free compacts from aqueous suspensions by electrophoretic deposition,” Trans. Mat. Res. Soc. Jpn., 25[1], 107-110 (2000).

Y. Sakka, H. Okuyama, T. Uchikoshi and S. Ohno, “Morphology and hydrogen desorption characteristics of Ni-TiN nanocomposite particles prepared by a dc plasma and rf plasma,” Trans. Mat. Res. Soc. Jpn., 25[1], 43-46 (2000).

T. Uchikoshi, Y. Sakka and K. Hiraga, “Effect of silica doping on the electrical conductivity of 3 mol% yttria-stabilized tetragonal zirconia prepared by colloidal processing,” J. Electroceram., 4:S1, 113-120 (1999).

T. Uchikoshi, Y. Sakka, K. Ozawa and K. Hiraga, “Processing of fine-grained monoclinic zirconia ceramics by colloidal processing,” J. Mater. Res., 13[4], 840-843 (1998).

T. Uchikoshi, Y. Sakka, K. Ozawa and K. Hiraga, “Pressure filtration and sintering of fine zirconia powder,” J. Europ. Ceram. Soc., 18, 669-674 (1998).

T. Uchikoshi, Y. Sakka, K. Ozawa and K. Hiraga, “Fabrication of nanostructured monoclinic zirconia ceramics by colloidal processing,” MRS Symp. Proc., 520, 103-107 (1998).

Y. Sakka, T. Uchikoshi, K. Ozawa, T. S. Suzuki and K. Hiraga, “Preparation of fine-grained zirconia systems by colloidal processing,” Ceram. Trans., 83, 233-240 (1998).

Y. Sakka, H. Okuyama, T. Uchikoshi and S. Ohno, Morphology and hydrogen desorption characteristic of Ni-TiN nanocomposite particle prepared by rf plasma,” NanoStructured Mater., 8, 456-475 (1997).

T. Uchikoshi, Y. Sakka, K. Ozawa and K. Hiraga, “Preparation and sintering of silica-doped zirconia by colloidal processing,” MRS Symp. Proc., 457, 33-38 (1997).

Y. Sakka, K. Sodeyama, T. Uchikoshi, K. Ozawa and M. Amano, “Water sorption-desorption characteristics of proton-conducting antimonic acids with cubic and monoclinic structures,” J. Am. Ceram. Soc., 79[6], 1677-1680 (1996).

T. Uchikoshi, Y. Sakka and M. Amano, “Effect of adsorbed water on electric conductivity of antimonic acids with different structures,” Solid State Ionics, 89 [3,4], 351-354 (1996).

T. Uchikoshi, Y. Sakka and K. Ozawa, “Pressure filtration of alumina fine particles,” Proc. 5th World Congr. Chem, Eng., 4, 1007-1012 (1996).

Y. Sakka, H. Okuyama, T. Uchikoshi and S. Ohno, “Characterization of degraded surfaces of Al and AlN ultrafine powders, ” NanoStructured Mater., 5 [5], 577-588 (1995).

打越哲郎, 奥山秀男, 目義雄, “アルミナ超微粉のプレッシャーフィルトレーション,” 粉体および粉末冶金, 42 [3], 309-313, (1995).

Y. Sakka, T. Uchikoshi and S. Ohno, “Degradation behabiour of advanced ceramic ・powders: (I) Superconducting and tetragonal zirconium oxides,” Adv. in Sci. and Tech., 3B, 1011-1018 (1995).

Y. Sakka, T. Uchikoshi, H. Okuyama and S. Ohno, “Degradation behabiour of advanced ceramic powders: (II) AlN and TiN ultrafine powders,” Adv. in Sci. and Tech., 3B, 1451-1458 (1995).

T. Uchikoshi, Y. Sakka, M. Yoshitake and K. Yoshihara, “A study of passivating oxide layer on fine nickel particles,” NanoStructured Mater., 4 [2], 199-206 (1994).

T. Uchikoshi, Y. Sakka, M. Yoshitake, T. Furubayashi and K. Yoshihara, “Characterization of the surface oxide layer of fine iron particles,” Trans. Mat. Res. Soc. Jpn., 14A, 65-68 (1994).

Y. Sakka, S. Ohno, T. Uchikoshi, H. Okuyama and M. Ozawa, “Characterization of (Fe, Ni, Co)-TiN nanocomposite particles synthesized by "reatcive plasma-metal reaction" method,” Trans. Mat. Res. Soc. Jpn., 14A, 57-60 (1994).

T. Uchikoshi, Y. Sakka, S. Ohno, H. Okuyama and K. Yoshihara, “Adrorption of hydrogen on Ni and Ni-TiO₂ composite ultrafine particles,” Surface Sci., 287/288, 1082-1086 (1993).

Y. Sakka and T. Uchikoshi, “Surface chemistry and sintering characteristics of nickel ultrafine powders,” Powder Metallurgy, 36, 179-185 (1993).

Y. Sakka, T. Uchikoshi and E. Ozawa, “Sintering characteristics of Fe and Fe-Co alloy ultrafine powders,” J. Mater. Sci., 28 [1], 203-217 (1993).

打越哲郎, 吉武道子, 目義雄, 古林孝夫, 吉原一紘, “鉄超微粒子表面安定化被膜のキャラクタリゼーション,” 日本化学会誌, [1], 92-97 (1993).

Y. Sakka, T. Uchikoshi and S. Ohno, “Sintering characteristics of iron ultrafine powders,” Solid State Phenomena, 25&26, 179-186 (1992).

打越哲郎, 目義雄, “鉄超微粉のガス放出挙動と大気安定性,” 日本金属学会誌, 55 [5], 558-563 (1991).

目義雄, 打越哲郎, “ガス放出挙動からみた鉄超微粉の表面状態と表面酸化層の還元,” 日本金属学会誌, 55 [2], 219-226 (1991).

A. Aoki, S. Ohno, T. Uchikoshi and Y. Muramatsu, “Characterization of hydroxyapatite precursor synthesized by wet process,” Phosphorus Res. Bull., 1, 31-34 (1991).

Y. Sakka and T. Uchikoshi, “Sorption and desorption characteristics of water vapour on YBa₂Cu₃O_7-x powders,” J. Jpn. Appl. Phys., 29 [11], L2022-L2025 (1990).

Y. Sakka, T. Uchikoshi and E. Ozawa, “Sintering and gas desorption characteristics of copper ultrafine powders,” Mat. Trans. JIM, 31 [9], 802-809 (1990).

目義雄, 打越哲郎, “酸化物超電導体粉末のガス吸脱着特性,” 粉体および粉末冶金, 37 [5], 761-764 (1990).

打越哲郎, 目義雄, 大野悟, “パラジウム超微粉のガス放出挙動,” 粉体および粉末冶金, 37 [4], 508-512 (1990).

Y. Sakka, T. Uchikoshi and S. Ohno, "Some aspects of the surface phases of metal and nitride ultrafine powders exposed to air,” Proc. 2nd World Congr. PARTICLE TECH., Soc. Powder Tech. Jpn., 329-336 (1990).

Y. Sakka, T. Uchikoshi and E. Ozawa, “Sintering of copper ultrafine powders,” Sci. of Sintering, Plenum Press, 193-202 (1990).

T. Uchikoshi, Y. Sakka and E. Ozawa, “銀超微粉の焼結とガス放出,” 日本金属学会誌, 53 [6], 614-620 (1989).

目　義雄, 打越哲郎, 小沢英一, “銅超微粉の真空焼結における脱ガスと緻密化の関係,” 日本金属学会誌, 53 [4], 422-428 (1989).

Y. Sakka, T. Uchikoshi and E. Ozawa, “Low-temperature sintering and gas desorptiom of gold ultrafine powders,” J. Less-Common Metals, 147 [1], 89-96 (1989).

T. Uchikoshi, Y. Sakka and S. Ohno, “Gas desorption and oxidation of Fe ultrafine powders,” Proc. 1st. Jpn. Int'l SAMPE Symp., 25-30 (1989).

Y. Sakka, T. Uchikoshi and E. Ozawa, “Effect of the slow oxidation treatment on the characteristics of the ultrafine metal powders,” Proc. MRS Int'l. Symp., Powder Preparation /Rapid Quenching, 39-44 (1989).

Y. Sakka and T. Uchikoshi, “Gas desorption characteristics of Ag ultrafine powders synthesized by different methods,” Proc. 32nd Jpn. Cogr. Mat. Res., 104-109 (1989).

Review Papers

鈴木　達、打越哲郎、奥山秀男、目　義雄，“強磁場中コロイドプロセスを用いた弱磁性セラミックスの異方性制御”, Materials Integration, 17 [5], 32-38 (2004).

目　義雄、鈴木　達、打越哲郎,“電・磁界印加コロイドプロセスによるセラミックスの高次組織制御”, 化学と工業, 57[4], 403-405 (2000).

Y. Sakka, T. S. Suzuki, F. Tang, T. Uchikoshi, and K, Hiraga, “Fabrication of Tailored Alumina-Based Ceramics Through Novel Colloidal Processing,” 2nd Fulrath Memorial International Symposium on Advanced Ceramics, 62-66 (2003).

打越哲郎, “電気泳動法によるナノ無機マテリアルの形成,” J. Soc. Inorg. Mater. Jpn., 8, 478-483 (2001).

打越哲郎, “電気泳動法によるセラミックスの高次成形法,” 第24回東海若手セラミスト懇話会テキスト, 日本セラミックス協会東海支部, 9-15(2001).

打越哲郎, “電気泳動法によるセラミックスの成形および積層化,” Materials Integration, 13 [11], 18-24 (2000).

打越哲郎、目　義雄, “電気泳動法によるセラミックスプロセッシングと水素吸蔵金属の利用,” セラミックス, 35 [7], 521-524 (2000).

打越哲郎, “電気泳動法によるセラミックスの成形プロセスと積層材料への応用,” 第32回高温材料技術講習会テキスト, 日本セラミックス協会, 1-9 (2000).

T. Uchikoshi, Y. Sakka and E. Ozawa, “Sintering and gas evolution of silver ultrafine powders,” Trans. Nat. Res. Inst. Metals, 32 [3], 73-80 (1990).

目　義雄, 打越哲郎, “電気泳動堆積法による新規な積層コンポジットの開発”, つくば技術ホットニュース29号（茨城県工業技術センターサロン）, 1-2 (2001).

目　義雄、鈴木　達、打越哲郎、小澤　清、平賀啓一郎、“外界制御コロイドプロセスによる特殊構造物質の創製”, 粉砕, 44, 48-54 (2000).

Books

反応場制御による新しい材料プロセッシング, アイピーシー, (2003)（分担執筆）

ナノ微粒子の調製および分散・凝集コントロールとその評価, 技術情報協会, (2003) （分担執筆）

ナノ粒子の製造・評価・応用・機器の最新技術, シーエムシー出版, (2002) （分担執筆）

図解金属材料技術用語辞典第２版, 日刊工業新聞社, (2000) （分担執筆）

Fine Particle Processing Group

Last updated