 |
| オリジナル論文 / Original Papers |
| ＜2010年＞ |
Evaluation of hydrogen entry into high strength steel under atmospheric corrosion
秋山英二 松門克浩 王毛球 津崎兼彰
Corrosion Science Vol.52 (Jun 2010) pp.2758-2765 |
Hydrogen embrittlement property of a 1700-Mpa-class ultrahigh-strength
tempered martenesitic steel
李松傑 秋山英二 木村勇次 津崎兼彰 宇野暢芳 張波萍
Sience and Technology of Advanced Materials Vol.11 (May 2010) pp.250005 |
Evaluation of susceptibility of stregth steels to delayed fracture by using
cyclic
corrosion test and rate testl
李松傑 張作貴 秋山英二 津崎兼彰 張波萍
Corrosion Science Vol.52 (Ｊａｎ 2010) pp.1660-1667 |
| ＜2009年＞ |
Delamination toughening of ultrafine grain structure steels
Processed through Tempforming at Elevated Temperatures
木村勇次 井上忠信 殷福星 津崎兼彰
ISIJ INTERNATIONAL Vol.50 No.1 (Jan 2010) pp.152-161 |
The Effect of Microstructure on Corrosion of Molybdenum-Beaning Titanium
Alloy in High Chloride and Acidic Solution at High Temperature
SENGODAN TAMILSELV I西村俊弥 X.H.Min 津崎兼彰
MATERIALS TRANSACTIONS Vol.50 No.11 （2009） pp.2545-2551 |
Evolution of matrix strength in ultra-fine grained pure Al by nanoindentation
Zhang Ling 大村孝仁 江村聡 関戸信彰 殷福星 Min.Xiaohua 津崎兼彰
JOURNAL OF MATERIALS RESEARCH Vol.24 ,No.9 (Sep 2009) pp.2917-2923 |
暴露試験で生じたシリコン添加鋼のさび構造と電気化学特性
西村俊弥
日本金属学会誌 第73巻 第2号 （2009） pp.81-87 |
Plastic Flow of the Mechanically Alloyed Fe-0.6%O at Temperatures of 550-700℃
V.A.Dudko R.O.Kaibyshev A.N.Belyakov 坂井義和 津崎兼彰
PHYSICS OF METALS AND METALLOGRAPHY Vol.107 No.5 (May.2009) pp.554-560 |
| ＜2008年＞ |
Corrosion resistance of molybdenum-containing titanium alloy for overpack
in simulating underground environment
西村俊弥
JOURNAL OF NUCLEAR MATERIALS Vol.385 （2009） pp.495-503 |
Monitoring of Environmental Factors and Corrosion Analysis of Reinforcing
Steel in Mortar
Vedarajan Raman 西村俊弥
MATERIALS TRANSACTIONS Vol.50 No.4 （2009） pp.799-805 |
Tensile behaviour of submicrocrystalline ferrite steel processed by largestain
deformation
A.Belyakov 津崎兼彰 木村好里 三島良直
PHILOSOPHICAL MAGAZINE LETTERS Vol.89 No.3 (Mar.2009) pp.201-212 |
Corrosion Behavior of Carbon Steel for Overpack in Groundwater containing
Bicarbonate lons
西村俊弥
JOURNAL OF POWER AND ENERGY SYSTEMS Vol.3 No.1(2009) pp.23-30 |
Nano-scale chemical analysis of rust on a 2% Si-bearing low alloy steel
exposed
in a coastal environment
村山光宏 西村俊弥 津崎兼彰
CORROSION SCIENCE Vol.50 (Aug.2008) pp.2159-2165 |
Alterration in nanohardness of matrix phase associated with precipitation
during lomg-term aging of type 316 stainless steel
大村孝仁 澤田浩太 木村一弘 津崎兼彰
MATERIAL SCIENCE AND ENGINEERING A Vol.489 No.1-2 pp.85-92 |
Microstructure behavior of Al-Mg-Sc alloy processed by ECAP at elevated
temperature
OlegSITDIKOV Taku Sakai E..Avtokratova R.Kaibyshev
津崎兼彰 Y.Watanabe
ACTA MATERIALIA Vol.56 No.4 pp.821-834 |
Inverse Temperature Dependence of Toughness in an Ultrafine Grain-Structure
Steel
木村勇次 井上忠信 殷福星 津崎兼彰
SCIENCE Vol.320 No.23 pp.1057-1060 |
CSRT法による高強度鋼の遅れ破壊特性の評価
萩原行人 伊藤睦人 久森紀之 鈴木啓史 高井健一 秋山英二
鉄と鋼 Vol.94 No.6 pp.215-221 |
| ＜2007年＞ |
Crystallography and kinetics of dynamic transformation in steels
足立吉隆 友田陽
ISIJ INTERNATIONAL |
Ultra ne grain formation by slip system
DorotheeDORNER 足立吉隆 津崎兼彰
ISIJ INTERNATIONAL |
Effect of Carbon Addition on Dynamic Recrystallization of Fe-18Ni Martensite
during Warm Compression
P.J.Xu J.H.Li 友田陽 足立吉隆
METALLURGICAL AND MATERIALS TRANSACTION A |
暴露試験で生じたアルミニウム添加鋼のさび構造
西村俊弥
日本金属学会誌 第71巻 第10号 （2007） pp.908-915 |
Ultrafine Grain Formation in Ferritic Stainless Steel during Severe Plastic
Deformation
酒井拓 Belyakov Andrey 三浦博己
METALLURGICAL AND MATERIALS TRANSACTION A |
Corrosion resistance of Si-Al bearing ultrafine grained weathering steel
西村俊弥
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS Vol.9 （2008） |
Corrosio Resistance of Titanium Alloy on the overpack for High-level Radioactive
Waste Disposal
西村俊弥
Journal of Power and Energy Systems Vol.2 No.2 (2008) pp.530-537 |
Rust formation and corrosion performance of Si and Al-bearing Ultraine
Grained Weathering Steel
西村俊弥
CORROSION SCIENCE Vol.50 (2008) pp.1306-1312 |
EBSDと中性子解析によるマルテンサイト鋼の階層的不均一変形挙動の解析
諸岡聡 友田陽 足立吉隆 森戸茂一 神山崇
鉄と鋼 Vol.94 No.8(2008年） pp.313-320 |
Incomplete recrystallization in cold worked steel containing TiC
Belyakov Andrey Fu-Gao Wei 津崎兼彰 木村好里 三島良直
MATERIALS SCIENCE AND ENGINEERING A Vol.471 pp.50-56 |
Annealing behaviour of a ferritic stainless steel subjected to large strain
cold working
Belyakov Andrey 津崎兼彰 木村好里 三島良直
JOURNAL OF MATERIALS RESEARCH Vol.22 No.11(Nov.2007)pp.3042-3051 |
Effect of hydrogen on the fracture behavior of high strength steel during
slows train rate test
王毛球 秋山英二 津崎兼彰
CORROSION SCIENCE Vol.49 No.11(Oct.2007)pp.4081-4097 |
Toughening of a 1500 Mpa class steel through formation of an ultrafine
fibrous grain structure
木村勇次 井上忠信 殷福星 Oleg SITIDIKOV 津崎兼彰
SCRIPTA MATERIALIA Vol.57 No.6(Sep.2007)pp.465-468 |
Periodic crystal lattice rotation inmicroband groups in s bcc metal
DorotheeDORNER 足立吉隆 津崎兼彰
SCRIPTA MATERIALIA Vol.57(2007)pp.775-778 |
Microstructure effect on nanohardness distribution for medium-carbon matrtensitic
steel
李金許 大村孝仁
Science in Chaina Vol.49 No.1(Jan.2006) pp.10-19 |
The Formation of Ultrafine Ferrite Through Static Transformation in Low
Carbon Steels
足立吉隆 脇田昌幸 Hossein Beladi Peter Damian
ACTA MATERIALIA Vol.55(July.2007) pp.4925-4934 |
Comparative Study on Microstructure Evolution upon Unidirectional and Multidirectional
Cold Working in an Fe-15%Cr Ferritic Alloy
Belyakov Andrey 津崎兼彰 木村勇次 木村良里 三島良直
MATERIALS SCIENCE AND ENGINEERING A-Vol.456 No.1-2(May.2007)pp.323-331 |
超高力ボルトの創製と機械的特性
木村勇次 秋山英二 津崎兼彰
鋼構造論文集 第14巻54号（2007.6）pp.121-127 |
Effect of α-Al/Al3Ni microstructure on the corrosion behaviour of Al–5.4wt%
Ni alloy fabricated by equal-channel angular pressing
張作貴 秋山英二 渡辺義見 片田康行 津崎兼彰
CORROSION SCIENCE Vol.49(July.2007) pp.2962-2972 |
Plasticity intiation and subsequent deformation behavior in the vicinity
of single grain boundary investigated through nanoindentation technique
大村孝仁 津崎兼彰
JOURNAL OF MATERIALS SCIENCE Vol.42 No.5(Mar.2007)pp.1728-1732 |
Grainrefinement in a commmercial Al-Mg-Sc alloy under hot ECAP aconditions
OlegSITDIKOV 酒井拓 E..Avtokratova R.Kaibyshev 木村勇次 津崎兼彰
MATERIALS SCIENCE AND ENGINEERING A Vol.444 No.1(Jan.2007)pp.18-30 |
The role of corrosion-resistant alloying elements in passivity
橋本功二 浅見勝彦 川嶋朝日 幅崎浩樹 秋山英二
CORROSION SCIENCE Vol.49 No.1(Jan.2007)pp.42-52 |
| ＜2006年＞ |
Corrosion Behavior of Silicon-Bearing Steel in a Wet/Dry Environment Containing
Chloride Ions
西村俊弥
MATERIALS TRANSACTIONS, Vol.48 No.6 (June.2007) pp.1438-1443 |
Ultra rapid softning of high strength structural steels by thermomechanical treatment
足立吉隆 津崎兼彰
Materials Science Foum Vol.539-543 pp.4807-4812 |
Crystallography and mechanical properties of ultrafine trip-aided multi-phase
steels
Masayuki Wakita 足立吉隆 友田 陽
Materials Science Foum Vol.539-543 pp.4351-4356 |
Formation of Ultrafine Grained Ferite/Austenite Duplex Microstructure by Warm Compression
in a 17Ni-0.2C Tempered Martensite Steel
P.G.Xu Jianhong Li Y.Tomota 足立吉隆
SCRIPTA MATERIALIA |
Development of a high-strength high-conductivity Cu-Ni-P alloy.
Part 2:processing by severe deformation
B.Andrey 村山光宏 坂井義和 津崎兼彰 M.Ohkubo M.Eto T.Kimura
JOURNAL OF ELECTRONIC MATERIALS Vol.35 No.11(Nov.2006)pp.2000-2008 |
Development of a high-strength high-conductivity Cu-Ni-P alloy.
Part 1:Characterization of precipitation products
村山光宏 B.Andrey 原徹 坂井義和 M.Eto T.Kimura
JOURNAL OF ELECTRONIC MATERIALS Vol.35 No.10(Oct.2006)pp.1787-1792 |
A Novel Approach towards Ultrafine Grained Structure Formation in Low Carb
on Steels
足立吉隆 脇田昌幸 Hossein Beladi Peter Damian Hodgson
MATERIALS SCIENCE AND ENGINEERING A
-STRUCTURAL MATERIALS PROPERTIES MICROSCOPY |
In situ Neutron Diffraction during Thermo-Mechanically Controlled Process
in Low Alloy Steels
M.Skoo P.G.Xu Y.Tomota O.Muransky 足立吉隆
SOLID STATE PHENOMENA Vol.118(Sep.2006)pp.419-424 |
Depassivation and repassivation of titanium under particle impingement
秋山英二 津崎兼彰
Corrosion and Electrochemistry of Advanced Materials |
Effect of hydrogen on the fracture behavior of high-strength Cr-Mo steel
王毛球 秋山英二 津崎兼彰
Materials Science Forum Vol.512(Apr..2006)pp.55-60 |
Corrosion behavior of Al-7wt% Si-1. Cu severely deformed by equal-channel
angular pressing
張作貴 秋山英二 渡辺義見 片田康行 津崎兼彰
Materials Science Forum |
Influence of microstructure on electrochemical properties of severely deformed
Al-5wt%Cu alloy by ECAP
張作貴 秋山英二 渡辺義見 片田康行 津崎兼彰
Materials Science Forum Vol.519-521(2006)pp.705-710 |
Grain refinement performance of aluminum aast-alloy by beformed Al-Al3Ti alloy refiner
H.Sato K.Ota Y.Watanabe 張作貴 津崎兼彰
Materials Science Forum Vol.519-521(Jul.2006)pp.1859-1864 |
Mechanical Properties of Al-5.7wt% Ni Eutectic Alloy Severely Defoemed
by Equal-Channel Angular Pressing
Y.Watanabe 張作貴 H.Sato
Materials Science Forum |
Determination of the critical hydrogen concentration for delayed fracture
of high strength steel by constant load test and numerical calculation
王毛球 秋山英二 津崎兼彰
CORROSION SCIENCE Vol.48 No.8(Aug.2006) pp.2189-2202 |
Hydrogen entry in crevice region:Evaluation by hydrogen permeation technique
Thiyagararajan Sundararajan 秋山英二 片田康行 津崎兼彰
ISIJ INTERNATIONAL Vol.46 No.7(Jul.2006) pp.1081-1085 |
Discrete electrochemical transients of aluminium alloys generated by slurryjet
impingement
秋山英二 Martin Stratmann Achm Walter Hassel
JOURNAL OF PHYSICS D-APPLIED PHYSICS
Vol.39 No.15(Aug.2006) pp.3157-3164 |
Grain refining performance for Al-Si alloy casts by addition of equal-channel
angular pressedAl-5mass% Ti alloy
張作貴 細田茂光 金翼水
MATERIALS SCIENCE AND ENGINEERING A Vol.425 (June 2006) pp.55-63 |
Austenite-to-ferrite transformation in low alloy steels is durin. thermpmechanically
controlled process studied by in situ neutron diffraction
P.G.Xu Yo Tomota P.Lukas Czech Republic O.Muransky Y.adachi
MATERIALS SCIENCE AND ENGINEERING A(2006)pp.46-53 |
Nano-scale chemical analysis of passivated surface layer on stainless steels
村山光宏 津崎兼彰
CORROSION SCIENCE Vol.48 No.6(June 2006) pp.1307-1318 |
Inhomogeneous nano-mechanical properties in the multi-phase microstructure
of long-term aged type 316 stainless steel
大村孝仁 澤田浩太 津崎兼彰 木村一弘
JOURNAL OF MATERIALS RESEARCH Vol.21 No.5(May 2006) pp.1229-1236 |
Fracture criterion for hydrogen embrittlement of high strength steel
王毛球 秋山英二 津崎兼彰
MEASUREMENT SCIENCE & TECHNOLOGY
Vol.22 No.2(February 2006) pp.167-172 |
Hydrogen Mapping Across Crevice
Thiyagararajan Sundararajan 秋山英二 津崎兼彰
ELECTROCHEMICAL AND SOLID STATE ＬＥＴＴＥＲＳ
Vol.8 No.9(September 2005) pp.B30-B33 |
Fracture toughness and high temperature strength of unidirectionally solid
ified Nb-Si binary and Nb-Ti-Si ternary alloys
N.Sekido Y.Kimura S.Miura Fu-GaoWei Y.Mishima
Journal of alloys and compounds (January 2006) |
Orientation relationship between Nb and Nb5Si3(D81) phases in the eutectoid
lamellar microstructure
N.sekido Fu-GaoWei Y.Kimura S.Miura Y.Mishima
Philosophical magazine letters Vol.86 No.2(February 2006) pp.89-98 |
Phase equilibria in the T-Al-C(T:Co,Ni,Rh,Ir)and T-Al-B(T:Rh,Ir)systems
for the design of E21-Co3AlC based heat resistant alloys
木村好里 飯田薫子 Fu-GaoWei Y.Mishima
Intermetallics Vol.14 No.5(May 2006) pp.508-514 |
Ｑｕａｎｔｉｔａｔｉｖｅ ａｎａｌｙｓｉｓ ｏｎ ｈｙｄｒｏｇｅｎ ｔｒａｐｐｉｎｇ ｏｆ ＴｉＣ ｐａｒｔｉｃｌｅｓ ｉｎ steel
Fu-GaoWei 津崎兼彰
Metallurgical and materials transactions A-physical metallurgy and materia
Vol.37A No.2(February 2006) pp.331-353 |
Microstructure Evolution in Dual Phase Stainless Steel during Severe Deformation
B.Andrey 木村勇次 津崎兼彰
ACTA MATERIALIA Vol.54 (January 2006) pp.2521-2532 |
ナノインデンテーション Nanoindentation
大村孝仁
ナノマテリアル工学大系 第２巻 ナノ金属 Vol.2 (January 2006) pp.400-406 |
| ＜2005年＞ |
Origin of the Hｙdrogen Absorbed by Incoherent TiC Particles in Iron
津崎兼彰 F.G.Wei
Materials Science Forum Vol.475-479(2005)pp.233-236 |
On structural mechanism of continuous recrystallization in ferritic stainless
steel after large strain processing
A.Belyakov 木村勇次 津崎兼彰
Materials Science Forum Vol.503-504(2006)pp.323-328 |
Deformation Microstructures in A Two-Phase Stainless Steel during Large
Strain Deformation
津崎兼彰 A.Belyakov 木村勇次
Materials Science Forum Vol.503-504(2006)pp.305-310 |
放射光を用いた鋳造組織のX線イメージング
梅澤修 原徹 大村孝仁
JOURNAL OF JAPAN FOUNDARY ENGINEERING SOCIETY
Vol.77 No.11(November 2005) pp.759-763 |
Crystallographic analysis of grain boundary BCC-precipitation in a Ni-Cr
alloy by FESEM/EBSD and TEM/Kikuchi Line Methods
Y.Adachi K.Hakata K.Tsuzaki
Materials Sience and Engineering A Vol.A412 (December 2005) pp.252-263 |
Coherent-to-incoherent transition of intergranular bcc-precipitate by pre-/post-deformations
in a Ni-43Cr Alloy
Y.Adachi K.Tsuzaki
ISIJ International Vol.45 No.11(December 2005) pp.1703-1710 |
Nanoindentation-Induced Dermation Behavior in the Vicinity of Single Grain
Boundary of Interstitial-Free Steel
T.Ohmura K.Tsuzaki F.Yin
MATERIALS TRANSACTIONS Vol.46 No.9(September 2005) pp.2026-2029 |
マルテンサイト鋼の動的再結晶挙動
包耀宗 足立吉隆 遠峰裕二 鈴木徹也 徐平光 友田陽
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF
JAPAN Vol.91 No.7(July 2005) pp.602-608 |
Crosshead speed dependence of the notch tensile strength of a high strength
steel in the presence of hydrogen
M.Wang E.Akiyama K.Tsuzaki
SCRIPTA MATERIALIA Vol.53 (June 2005) pp.713-718 |
Evaluation of Grain Boundary Effect on Strength of Fe-C Low Alloy Martensitic
Steels by Nanoindentation Technique
J.Li T.Ohmura K.Tsuzaki
MATERIALS TRANSACTIONS Vol.46 No.6(June 2005) pp.1301-1305 |
Effect of hydrogen and stress concentration on the notch tensile strength
of AISI 4135 steel
M.Wang E.Akiyama K.Tsuzaki
MATERIALS SCIENCE AND ENGINEERING A Vol.398 (January 2005) pp.37-46 |
Recovery and recrystallization in ferritic stainless steel after large
strain deformation
A.Belyakov Y.Kimura K.Tsuzaki
Materials Science and Engineering A Vol.A403 No.1,2(August 2005) pp.249-259 |
Crystallography of 〔011〕/54.7 deg lath boundary and cementite in tempered
0.2C steel
F.G.Wei K.Tsuzaki
ACTA MATERIALIA Vol.53 (May 2005) pp.2419-2429 |
Light pre-deformation induced misorientation of grain boundary bcc-precipitates
from the Kurdjumov-Sacks relationship in a Ni-Cr alloy
Y.Adachi K.Tsuzaki
METALS AND MATERIALS INTERNATIONAL
Vol.11 No.5(December 2005) pp.341-349 |
Dynamic recrystallization of a martensite steel by rapid heating and compression
Y.Z.Bao Y.Adachi Y.Toomine P.G.Xu T.Suzuki Y.Tomota
SCRIPTA MATERIALIA Vol.53 (December 2005) pp.1471-1476 |
Response of hdyrogen trapping capability to microstructural change in tempered
Fe-0.2C martensite
F.G.Wei K.Tsuzaki
Scripta Materialia Vol.52 No.6(April 2005) pp.467-472 |
Hydrogen degradation of a boron-bearing steel with 1050 and 1300 MPa strength
levels
M.Wang E.Akiyama K.Tsuzaki
Scripta Materialia Vol.52 (2005) pp.403-408 |
Grain refinement in coarse-grained 7475 Al alloy during severe hot forging
O.Sitdikov T.Sakai A.Goloborodko H.Miura R.Kaibyshev
Philosophical Magazine Vol.85 No.11(April 2005) pp.1159-1175 |
Seam oxidation of high chromium ferritic stees containing palladium
T.Itagaki H.Kutsumi H.Haruyama M.Igarashi F.Abe
Corrosion Vol.61 No.4(April 2005) pp.307-316 |
Effect of Strain rate on development of fine grain structure in as-cast
7475 aluminum alloy during compression at elevated temperature
O.Sitdikov A.Goloborodko R.Kaibyshev H.Miura T.Sakai
Physics of Metals and Metallograhpy Vol.99 No.1(January 2005) pp.106-117 |
Grain refinement in coarse-grained 7475 Al alloy during severe hot forging
O.Sitdikov T.Sakai A.Goloborodko H.Miura R.Kaibyshev
Philosophical Magazine Vol.85 No.11(April.2005) pp.1159-1175 |
Seam oxidation of high chromium stees containing Corrosionpalladium
板垣孟彦 九津見啓之 春山博司 五十嵐正晃 阿部富士雄
Corrosion Vol.61 No.4(April2005) pp.307-316 |
| ＜2003年・2004年＞ |
Influence of Ta content on microstructure and mechanical properties of
Ir-Ta as diffusion barrier coatings on nickel base single crystal superalloy
TMS-75
P. Kuppusami H. Murakami 大村孝仁
Surface Engineering in Materials Science
Vol.112(Mar.2003)pp.308-319 |
Hydrogen degradation of a boron-bearing steel with 1050 and 1300 MPa strength
levels
王毛球 秋山英二 津﨑兼彰
Scripta materialia Vol.52 No.5(March 2005) pp.403-408 |
Effect of inhomogeneity of carbide precipitation on nanohardness distribution for marensitic steels
李金許 大村孝仁 Fu-Gao Wei
Materials Science Forum Vol.475-479(January 2005) pp.4109-4112 |
Evaluation of grain boundary effect on the strength of Fe-C martensitic steels through nanoindentation technique
大村孝仁 津崎兼彰
Materials Science Forum Vol.475-479(January 2005) pp.4113-4116 |
超微細粒低炭素鋼の疲労特性
沢井達明 松岡三郎 津崎兼彰
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN
Vol.89 No.6(June 2003) pp.736-733 |
In situ Transmission-Electron-Microscopy Investigation of Melting in Submicron
Al-Si Alloy Particles under Electron-Beam Irradiation
Takeshi Yokota 村山光宏 J.M.Howe
Physical Review Letters Vol.91 No.26(December2003) pp.265504-265544 |
Precise determination of the activation energy for desorption of hydrogen in two Ti-added steels by a single thermal-desorption spectrum
韋富高 原徹 津崎兼彰
Matallugical and Materials Transactions B-Process Metallurgy and Materials
Processing Vol.35(June 2004) pp.587-597 |
Hydrogen absorption of incoherent TiC particles in iron from environment
at high temperatures
韋富高 津崎兼彰
Metallurgical and Materials Transactions A-Physical Metallurgy and Materials
Science |
High-resolution transmission electron microscopy study of crystallography and morphology of TiC precipitates in tempered steel
韋富高 原徹 津崎兼彰
Philosophical Magazine A-Physics of Condensed Matter Structure Deffect and
Mechanical Properties Vol.84 No.17(June 2004) pp.1735-1751 |
Hard metallic glass of tungsten-based alloy
M.Ohtsuki R.Tamura S.Takeuchi T.Ohmura
Applied Physics Letters Vol.84 No.24(June 2004) pp.4911-4913 |
Fractional Brownian motion of an Al nanosphere in liquid Al-Si alloy under electron-beam irradiation
T.Yokota J.M.Howe W.A.Jesser M.Murayama
Journal of Applied Physics Vol.95 No.10(May 2004) pp.5756-5761 |
Static and in situ TEM investigation of phase relationships, phase dissolution,
and
interfacemotion in Ag-Au-Cu alloy nanoparticles
K.Chatterjee J.M.Howe W.C.Johnson M.Murayama
Acta Materialia Vol.52 No.6(June2004) pp.2923-2935 |
Effects of heat and elecron irradiation on the melting behavior of Al Si
Alloy particles and motion of the Al nanosphere within
J.M.Howe T.Yokota M.Murayama W.A.Jesser
Journal of Electron Microscopy Vol.53 No.2(February2004) pp.107-114 |
Tensile Behavior of TRIP-Aided Multi-Phase Steels Studied by in situ Neutron
Diffraction
Y.Tomota H.Tokuda Y.Adachi M.Wakita N.Minakawa A.Moriai Y. Morii
Acta Materialia Vol.52 (2004) pp.5737-5745 |
Effect of pressing temperarute on fine-grained structure formation in 7475
aluminum alloy during ECAP
A. Goloborodko O.Sitdikov R.Kaibyshev, H. Miura, T. Sakai
Materials Science and Engineering A-Structural Materialss Properties
Microstructure and Processing (September2004) |
|
Effect of Pass Strain on Grain Refinement in 7475 Al Aloy during Hot Multidirectional
Forging
O.Sitdikov T.Sakai Goloborodko H.Miura R.Kaibyshev
Materials Transactions Vol.45 No.7(July2004) pp.2232-2238 |
Effect of Strain rate on development of fine grain structure in as-cast
7475 aluminum alloy during compression at elevated temperature
O.Sitdikov Goloborodko R.Kaibyshev H.Miura T.Sakai
Physics of Metals and Metallograhpy Vol.99 No.1(2005) pp.116-128 |
微細粒鋼の自動車への利用ー将来性と課題ー
津崎兼彰
第224回塑性加工シンポジウム (November 2003) pp.35-42 |
|
Microstructure Evolution in Ferrtic Stainless Steels during Large Strain
Deformation
A.Belyakov 木村勇次 足立吉隆 津崎兼彰
Materials Transactions Vol.45 No.9(2004) pp.2812-2821 |
Effect of Nano-Sized Oxides on Annealing Behaviour of Ultrafine Grained
Steels
A. Belyakov 坂井義和 原徹 木村勇次 津崎兼彰
Materials Transactions Vol.45 No.7(2004) pp.2252-2258 |
Hydrogen Trapping in Quenched and Tempered 0.42C-0.30Ti Steel Containing
Bimodal Dispersions of TiC particles
韋富高 原徹 土田武広 津崎兼彰
ISIJ International Vol.43 No.4(2003) pp.539-547 |
フェライト系耐熱鋼の強加工と予備酸化処理による耐水蒸気酸化性保護皮膜の形成
板垣孟彦 中里浩二 鳥塚史郎 九津見啓之 春山博司
耐熱金属材料第123委員会 Vol.44 No.1(March 2003) pp.59-65
日本金属学会誌 Vol.67 No.4(April 2003) pp.189-192 |
Evolution of Grain Boundaries and Subboundaries in Stainless Steel during
Dynamic Recrystallization
Belyakov Andrey 津崎兼彰 H. Miura T. Sakai
MATERIALS SCIENCE FORUM Vol.426-432(July 2003) pp.1005-1010 |
Annealing Softening Mechanisms Operating in Cold Worked Oxide-Bearing Steels
Andrey Belyakov Yoshikazu Sakai Toru Hara Yuji Kimura Kaneaki Tsuzaki
Scripta Materialia Vol.48 No.10(May 2003) pp.1463-1468 |
Evoluation of Grain Boundary Assemblies in Fe-0.6%O under Mechanical Milling
Followed by Consolidating Rolling
Andrey Belyakov Yoshikazu Sakai Toru Hara Yuji Kimura Kaneaki Tsuzaki
Scripta Materialia Vol.48 No.8(April 2003) pp.1111-1116 |
Effect of Initial Microstructures on Grain Refinement in a Stainless Steel
by Large Strain Deformation
Andrey Belyakov Yoshikazu Sakai Toru Hara Yuji Kimura
Kaneaki Tsuzaki H. Miura Y. Sakai
Acta Mater. Vol.51 No.3(February 2003) pp.847-861 |
Annealing Behaviour of Submicrocrystalline Oxide-Bearing Iron Produced
by Mechanical Alloying
Andrey Belyakov Yoshikazu Sakai Toru Hara Yuji Kimura Kaneaki Tsuzaki
Metallurgical and Materials TransactionsVol.34A No.1(January2003) pp.131-138 |
Evaluation of temper softening behavior of Fe-C binary martensitic steels by nanoindentation
大村孝仁 原徹 津崎兼彰
Scripta Materialia Vol.49 No.12(December 2003) pp.1157-1162 |
Matrix strength evaluation of ultra-fine grained steels by nanoindentation
大村孝仁 津崎兼彰 辻伸泰 紙川尚也
Journal of Materials Research Vol.19 No.1(January 2004) pp.347-350 |
Nanoscale mechanical characterization of secondary-hardening Fe-C based
martensitic steels using nanoindentation
大村孝仁 原徹 津崎兼彰 H.Nakatsu Y. Tamura
Journal of Materials Research Vol.19 No.1(January 2004) pp.79-84 |
Evaluation of matrix strength of Fe-C as-quenched and quench-tenpered martensite
using nanoindentation techniques
大村孝仁 津崎兼彰
JOURNAL DE PHYSIQUE IV Vol.112(2003) pp.267-270 |
The relationship between nanohardness and microstructures in high-purity
as-quenched and quench-tempered Fe-C martensite
大村孝仁 原徹 津崎兼彰
Journal of Materials Research Vol.18 No.6(June 2003) pp.1465-1470 |
Evaluation of mechanical properties of ceramic coatings on a metal substrate
大村孝仁 松岡三郎
Surface and Coatings Technology Vol.169-170(2003) pp.728-731 |
High-resolution TEM Analysis of Defect Structures in Mechanically milled,
Nanocrystalline Fe
村山光宏 J. M. Howe 飛鷹秀幸 高木節雄
ISIJ INTERNATIONAL Vol.43 No.4(May 2003) pp.755-760 |
Effect of Phase Fraction on the Tri-Junction in Two-Phase Nanoparticle
J. M. Howe A.E. Mebed K. Chatterjee P.Li 村山光宏 W.C. Johnson
ACTA MATERIALIA Vol.51(2003) pp.1359-1372 |
Hydrogen-induced delayed fracture of a martensitic steel with fine prior-austenite
grain size
木村勇次 高木周作 原徹 寺崎聡 津崎兼彰
Journal de Physics IV Vol.112(September 2003) pp.403-406 |
Hydrogen induced delayed fracture of ultrafine grained 0.6% O steel with
dispersed oxide particles
木村勇次 坂井義和 原徹 Belyakov Andrey 津崎兼彰
SCRIPTA MATERIALIA Vol.49 No.11(November 2003) pp.1111-1116 |
Experimental consideration of Multistage Martensitic Transformation and
Precipitation Behavior in Aged Ni-Rich Ti-Ni Shape Memory Alloys
西田稔 原徹 大庭卓也 Yamaguchi Koichi Tanaka Koichi 山内清
MATERIALS TRANSACTION Vol.44 No.12(December2003) pp.2631-2636 |
Combination and Interface Structure of 9RMartensite Plate Variants in Ti50.0Pd43.0Fe7.0
Shape Memory Alloy
井誠一郎 西田稔 原徹
Materials Transactions Vol.43 (May 2002) pp.902-907 |
Relationship between Microstructure and Hydrogen Absorption Behavior in
a V-bearing Tempered Martensitic Steel
原徹 土田武広 津崎兼彰
JOURNAL DE PHYSIQUE IV Vol.112 (2003) pp.411-414 |
Strage and release of soluble hexavanlent chromium from chromate conversion
coatings on Al alloys; Kinetics of release
秋山英二 A.J. Markworth J.KMcCoy G.S.Frankel L.Xia R.L.McCreery
Journal of the Electrochemical SocietyVol.150 No.2(January 2003) pp.B83-B91 |
Trigger for the occurrence of grain coarsening phenomenon of BS394S31 austenite
stainless stell under small plastic strain at high temperature
M. Akiyama Y. Neishi Y. Adachi K. Terada
Engineering computations Vol.20 No.5/6(October 2003) pp.499-512 |
Development of Submicrocrystalline Fe-O Steels under Mechanical Milling
Followed by Consolidation
津崎兼彰
MATERIALS SCIENCE FORUM Vol.426-432(July 2003) pp.2771-2776 |
Local Approach的手法の適用による高強度鋼の水素割れ感受性評価
高木周作 寺崎聡 津崎兼彰 井上忠信 南二三吉
JOURNAL OF THE JAPAN WELDING SOCIETY
Vol.22 No.1(February 2004) pp.125-131 |
