Inoino World

別刷ご希望の方は井上までE-mailにてご連絡下さい。

総論文数: ９０（うち筆頭論文：４６）◆2012/04/16現在◆

1-90	Estimations of the True Stress and True Strain until just before Fracture by the Stepwise Tensile Test and Bridgman Equation in Various Metals and Alloys
	N.Tsuchida, T.Inoue, K.Enami
	Materials Transactions, Vol.53, 2012, pp.133-139.
1-89	加工プロセスによる組織微細化と材料の強靭化
	井上忠信、木村勇次
	金属, Vol.81,No.8, 2011, pp. 641-648.
1-88	Static fracture toughness of fail-safe steel
	Tadanobu Inoue, Yuuji Kimura, Shojiro Ochiai
	SCRIPTA MATERIALIA, Vol.65,No.6, 2011, pp.552-555.
1-87	Hydrogen Embrittlement of a 1500-MPa Tensile Strength Level Steel with an Ultrafine Elongated Grain Structure
	Nie Yihong, Kimura Yuuji, Inoue Tadanobu, Yin Fuxing, Akiyama Eiji, Tsuzaki Kaneaki
	Metallurgical and Materials Transactions A, Vol.43,No.5, 2011, pp.1670-1687.
1-86	Deformation Mechanism in the Crack-Tip Region of Fine-Grained Magnesium Alloy
	Somekawa Hidetoshi, Inoue Tadanobu, Singh Alok, Mukai Toshiji
	Metallurgical and Materials Transactions A, Vol.42,No.8, 2011, pp.2475-2480.
1-85	Yield stress of duplex stainless steel specimens estimated using a compound Hall-Petch equation
	Hirota Noriaki, Yin Fuxing, Azuma Tsukasa, Inoue Tadanobu
	Science and Technology of Advanced Materials, Vol.11,No.2, 2010, 025004.
1-84	Fracture toughness of Al2O3 fibers with an artificial notch introduced by a focused-ion-beam
	Ochiai S., Kuboshima S., Morishita K., Okuda H., Inoue T.
	Journal of the European Ceramic Society, Vol.30,No.7, 2010, pp.1659-1667.
1-83	Effect of Deformation Mode on Texture of Ultrafine-grained Low Carbon Steel Processed by Warm Caliber Rolling
	Tadanobu Inoue, Fuxing Yin, Yuuji Kimura
	Materials Science Forum, Vols.638-642, 2010, pp.2793-2798.
1-82	Enhancing Fracture Toughness of Magnesium Alloy by Formation of Low-Angle Grain Boundary Structure
	Hidetoshi Somekawa, Alok Singh, Tadanobu Inoue, Toshiji Mukai
	ADVANCED ENGINEERING MATERIALS, Vol.12,No.9, 2010, pp.837-842.
1-81	Prototyping of Ultrafine-Grained Steel Fabrication
	Kotobu Nagai, Tadanobu Inoue
	Materials and Manufacturing Processes , Vol.25, 2010, pp.20-25.
1-80	Strengthening Mg-Al-Zn alloy by repetitive oblique shear strain with caliber roll
	Toshiji Mukai, Hidetoshi Somekawa, Tadanobu Inoue, Alok Singh
	SCRIPTA MATERIALIA, Vol.62,No.2, 2010, pp.113-115.
1-79	Deformation mechanism near crack-tip by finite element analysis and microstructure observation in magnesium alloys
	Hidetoshi Somekawa, Tadanobu Inoue, Toshiji Mukai
	MATERIALS SCIENCE AND ENGINEERING A, Vol.527,No.7-8, 2010, pp.1761-1768.
1-78	Delamination toughening of ultrafine grain structure steels processed through tempforming at elevated temperatures
	Yuuji Kimura, Tadanobu Inoue, Fuxing Yin, Kaneaki Tsuzaki
	ISIJ INTERNATIONAL, Vol.50,No.1, 2010, pp.152-161.
1-77	Effect of Shear Strain on the Microstructural Evolution of a Low Carbon Steel during Warm Deformation
	Joo-Hee Kang, Tadanobu Inoue, Shiro Torizuka
	Materials Transactions, Vol.51,No.1, 2010, pp.27-35.
1-76	Delamination effect on impact properties of ultrafine-grained low carbon steel processed by warm caliber rolling
	Tadanobu Inoue, Fuxing Yin, Yuuji Kimura, Kaneaki Tsuzaki, Shojiro Ochiai
	METALLURGICAL AND MATERIALS TRANSACTIONS A, Vol.41,No.2, 2010, pp.341-355.
1-75	Hardness Variation and Strain Distribution in Magnesium Alloy AZ31 Processed by Multi-pass Caliber Rolling
	Tadanobu Inoue, Hidetoshi Somekawa, Toshiji Mukai
	ADVANCED ENGINEERING MATERIALS, Vol.11,No.8, 2009, pp.654-658.
1-74	Quantification of strain in accumulative roll-bonding under unlubricated condition by finite element analysis
	Tadanobu Inoue, Nobuhiro Tsuji
	Computational Materials Science, Vol.46,No.1, 2009, pp.261-266.
1-73	温間クロスロール圧延鋼板のひずみと集合組織
	井上忠信、殷福星
	塑性と加工, Vol.50,No.578, 2009, pp.227-231
1-72	Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon Steel
	Joo-Hee Kang, T. Inoue, S. Torizuka
	Materials Transactions, Vol.50,No.1, 2009, pp.34-39
1-71	Distributions of Hardness and Strain during Compression in Pure Aluminum Processed with Equal-channel Angular Pressing and Subsequent Annealing
	T.Inoue, Z.Horita, H.Somekawa, F.Yin
	Materials Transactions, Vol.50,No.1, 2009, pp.27-33
1-70	Effect of initial grain sizes on hardness variation and strain distribution of pure aluminum severely deformed by compression tests
	T.Inoue, Z.Horita, H.Somekawa, K.Ogawa
	ACTA MATERIALIA, Vol.56,No.20, 2008, pp.6291-6303
1-69	オーバル孔型とスクエア孔型を用いた多方向大ひずみ圧延によって生成する微細粒組織と力学的性質の関係
	鳥塚史郎、村松栄次郎、井上忠信、長井寿
	日本金属学会誌, Vol.72,No.8, 2008, pp.571-580
1-68	Inverse Temperature Dependence of Toughness in an Ultrafine Grain Structure Steel
	Y.KIMURA, T.INOUE, F.YIN and K.TSUZAKI
	SCIENCE, Vol.320,No.5879, 2008, pp.1057-1060
1-67	実機溝ロール圧延機による超微細粒組織棒鋼の創成
	井上忠信、鳥塚史郎、村松栄次郎、長井寿
	鉄と鋼, Vol.94,No.5, 2008, pp.164-172
1-66	Tensile Test Specimens with a Circumferential Precrack forEvaluation of Interfacial Toughness of Thermal Sprayed Coatings
	A. Kishi, S.Kuroda, T.Inoue, T.Fukushima, H.Yumoto
	JOURNAL OF THERMAL SPRAY TECHNOLOGY, Vol.17,No.2, 2008, pp.228-233
1-65	Modified Tensile Adhesion Test for Evaluation of Interfacial Toughness of HVOF Sprayed Coatings
	M. Watanabe, S. Kuroda, K. Yokoyama, T. Inoue, Y.Gotoh
	SURFACE & COATINGS TECHNOLOGY, Vol.202,No.9, 2008, pp.1746-1752
1-64	Recrystallization and grain growth behavior of severe cold-rolling deformed SUS316L steel in anisothermal annealing condition
	N. Hirota, F. YIN, T. INOUE, T. Azuma
	ISIJ INTERNATIONAL, Vol.48,No.4, 2008, pp.475-482
1-63	実機鍛造プレスによる超微細粒組織厚鋼板の試作(Test Production of Ultrafine-grained Steel Plate by Large-scale Forging Press)
	井上忠信、落合朋之、殷福星、長井寿
	鉄と鋼, Vol.93,No.11, 2007, pp.693-702
1-62	Strain distribution and microstructural evolution in multi-pass warm caliber rolling
	T.Inoue, F.Yin and Y.Kimura
	MATERIALS SCIENCE & ENGINEERING A, Vol.466, 2007, pp.114-122.
1-61	Crystallographic Texture of Warm Caliber Rolled Low Carbon Steel
	T.Inoue, F.Yin and Y.Kimura
	Materials Transactions, Vol.48,No.8, 2007, pp.2028-2035
1-60	Analysis of Buckling and Interfacial Debonding of Galvannealed Coating Layer on Steel Substrates under Applied Tensile Strain
	S.Iwamoto, S.Ochiai, H.Okuda, T.Inoue
	ISIJ International, Vol.47,No.6, 2007, pp.930-934.
1-59	Toughening of a 1500 MPa class steel through formation of an ultrafine fibrous grain structure
	Y.Kimura, T.Inoue, F. Yin, O.Sitdikov and K.Tsuzaki
	Scripta MATERIALIA, Vol.57, 2007, pp.465-468.
1-58	温間溝ロール圧延によって創製されたオーステナイト系ステンレス棒鋼の軟化特性と強度(Softening Characteristic and Strength of Austenitic Stainless Steel Created by Warm Grooved Rolling)
	広田憲亮、井上忠信、木村勇次、東司、長井寿
	熱処理, Vol.46,No.4, 2006, pp.214-220
1-57	Fracture Toughness of a Crystalline Sillicon Carbide Fiber (Tyranno-SA3)
	K.Morishita, S.Ochiai, H.Okuda, T.Inshikawa, M.Sato and T.Inoue
	Journal of the American Ceramic Society, Vol.89,No.8, 2006, pp.2571-2576
1-56	多パスクロスロール圧延による鋼板断面の形状制御-第3報　せん断付与圧延鋼板における創形創質に関する研究　第３報-(Shape Control of Cross Section in a Steel Plate by Multi-pass Cross Roll Rolling-Study on Creation of Shape and Properties for Shear-Added Rolling Plates Ⅲ-）
	井上忠信・殷福星・長井寿
	塑性と加工, Vol.46,No.539, 2005, pp.1169-1173
1-55.	クロスロール圧延におけるひずみ分布の数値解析-せん断付与圧延鋼板における創形創質に関する研究　第２報-(Numerical Analysis Strain Distribution in Rolled Plates Introduced by Cross Roll Rolling -Study on Creation of Shape and Properties for Shear-Added Rolling Plates Ⅱ）
	井上忠信・長井寿
	塑性と加工, Vol.46,No.538, 2005, pp.1076-1080
1-54.	溝ロール圧延による超微細組織棒鋼のひずみと組織、硬さ分布(Distributions of Strain, Microstructure and Hardness in a Bar Steel with Ultrafine-grained Structure through Groove Rolling)
	井上忠信・殷福星・木村勇次・長井寿
	日本金属学会誌, Vol.69,No.11, 2005, pp.943-952
1-53.	数値解析による超微細組織棒鋼創製のための高効率加工プロセスの提案(Novel Rod Rolling Process for Designing Efficiently Ultrafine-Grained Steel Bars Based on Numerical Analysis)
	井上忠信・鳥塚史郎・長井寿
	日本金属学会誌, Vol.69,No.11, 2005, pp.934-942
1-52.	クロスロール圧延による鋼板の変形特性-せん断付与圧延鋼板における創形創質に関する研究　第１報-(Deformation Property of Cross Rolled Plates Based on Numerical and Experimental Analyses -Study on Creation of Shape and Properties for Shear-Added Rolling Plates Ⅰ-)
	井上忠信・岩崎智・長井寿
	塑性と加工, Vol.46,No.537, 2005, pp.989-993
1-51.	平滑丸棒引張および円周切欠引張におけるくびれ成長のモデル
	榎並啓太郎・長井寿・鳥塚史郎・井上忠信
	鉄と鋼, Vol.91,No.10, 2005, pp.769-776
1-50.	熱間加工されたNi-30Fe合金の内部組織におよぼすせん断変形の影響
	井上忠信・曹財榮・殷福生・長井寿
	日本金属学会誌, Vol.69,No.4, 2005, pp.341-347
1-49.	A New Evaluation Method of Hydrogen Embrittlement Fracture for High Strength Steel by Local Approach
	S.Takagi, S.Terasaki, T.Inoue, K.Tsuzaki and F.Minami
	ISIJ International, Vol.45,No.2, 2005, pp.263-271
1-48.	Effect of Shear Deformation on Microstructural Evolution of Ni-30Fe Alloy during Hot Deformaiton
	Jae-Young Cho, Tadanobu Inoue, Fuxing Yin and Kotobu Nagai
	Mat.Trans.,Vol.45,No.10, 2004, pp.2966-2973
1-47.	Effect of Initial Grain Orientation on Evolution of Deformed Microstructure in Hot Compressed Ni-30Fe Alloy
	Jae-Young Cho, Tadanobu Inoue, Fuxing Yin and Kotobu Nagai
	Mat.Trans.,Vol.45,No.10, 2004, pp.2960-2965
1-46.	加工ひずみ制御による高効率な結晶粒微細化技術の探索(Search for Highly Crystal Grains Refinement Technology Based on Strain Control)
	井上忠信
	Journal of the Japan Society for Technology of Plasticity,Vol.45-527, 2004, pp.1042-1044.
1-45.	Fiber texture and substructural feature in caliber-rolled ultrafine low carbon steels
	殷福星・花村年裕・井上忠信・長井寿
	Metallurgical and materials transactions A-physical metallurgy and materials science, Vol.35A-2, 2004, pp.665-677.
1-44.	Local Approach 的手法の適用による高強度鋼の水素割れ感受性評価(Evaluation of hydrogen embrittlement susceptibility of high strength steel based on Local Approach.)
	高木周作・寺崎聡・津崎兼彰・井上忠信・南二三吉
	日本溶接学会誌,Vol.22-1, 2004, pp.125-131.
1-43.	リサイクル鉄を用いた材料開発(Material Processing Development Based on Utilization of Scrap Steel)
	井上忠信・長井寿
	材料, Vol.52-9, 2003, pp.1107-1115.
1-42.	エネルギ解放率に基づく熱応力および引張り応力下での単繊維複合材料の破壊基準(Fracture Criterion of Single Fiber-Composite under Thermal and Tensile Loadings Based on Energy Release Rate)
	井上忠信・落合庄治郎・北條正樹・長井寿
	材料, Vol.52-7, 2003, pp.815-820.
1-41.	せん断付与圧延による圧延鋼板の特性(Characteristics of Rolled Steel Plates with Shear Deformation)
	中嶋宏・山下晃生・井上忠信・鳥塚史郎・花村年裕・長井寿
	鉄と鋼, Vol.89-2, 2003, pp.281-288.
1-40.	多方向加工による微細フェライト組織の均一形成(Development of Uniformly Fine-grained Ferrite Structure through Multidirectional Deformation)
	井上忠信・鳥塚史郎・長井寿
	熱処理, Vol.42-6, 2002, pp.385-387.
1-39.	広幅板材継手強度の簡易数値評価法(Timesaving Numerical Method of Evaluating Strength of Wide Plate Weld Joints)｣副題：溶接広幅継手機械特性の数値評価に関する検討（第一報）(Numerical Evaluation of Mechanical Properties of Wide Plate Weld Joints(1))
	篠原英毅・井上忠信・長井寿
	溶接学会論文集, Vol.20-4, 2002, pp.539-545.
1-38.	Serration of Grain Boundary in a Ni-30Fe Alloy through High Temperature Deformation
	D.W.Suh, T.Inoue, S.Torizuka, A.Ohmori and K.Nagai
	ISIJ International, Vol. 42-9, 2002, pp.1026 -1032.
1-37.	Ultrafine grain structure through dynamic recrystallization for Type 304 stainless steel
	Ilaria Salvatori, Tadanobu INOUE and Kotobu Nagai
	ISIJ International, Vol.42-7, 2002, pp.744 -750.
1-36.	Dynamic restoration process of Ni-30Fe alloy during hot deformation
	D.W.Suh, Shiro Torizuka, A.Ohmori, Tadanobu Inoue, Kotobu Nagai and H.C.Lee
	ISIJ International, Vol.42-4, 2002, pp.432-439.
1-35.	Effect of Shear Deformation on Refinement of Crystal Grains
	Tadanobu Inoue, Shiro Torizuka and Kotobu Nagai
	MATERIALS SCIENCE & THECHNOLOGY, Vol.18, 2002, pp.1007-1015.
1-34.	高強度鋼の水素割れ感受性評価におけるWeibull形状パラメータの決定方法(Determination Method of Weibull Shape Parameter for Evaluation of the Hydrogen Embrittlement Susceptibility of High Strength Steel)
	高木　周作・井上　忠信・津崎　兼彰・南　二三吉
	日本金属学会誌, Vol.65-12, 2001, pp.1082-1090.
1-33.	Weibull応力による高強度鋼の水素割れ感受性評価(Evaluation of Hydrogen Embrittlement Susceptibility of High Strength Steel by the Weibull Stress)
	高木　周作・井上　忠信・津崎　兼彰・南　二三吉
	日本金属学会誌, Vol.65-12, 2001, pp.1073-1081.
1-32.	Effect of Plastic Strain on Grain Size of Ferrite Transformed from Deformed Austenite in Si-Mn Steel
	Tadanobu Inoue, Shiro Torizuka, Kotobu Nagai, Kaneaki Tsuzaki and Tetsuya Ohashi
	MATERIALS SCIENCE & THECHNOLOGY, Vol.17-12, 2001, pp.1580-1588.
1-31.	Formation of Uniformly Fine-grained Ferrite Structure through Multi-directional Deformation
	Tadanobu Inoue, Shiro Torizuka and Kotobu Nagai
	MATERIALS SCIENCE & THECHNOLOGY, Vol.17-11, 2001, pp.1329-1338.
1-30.	Push-out試験での界面き裂進展における母材弾性率の影響の数値解析およびその実験評価への応用(Numerical Analysis of Matrix Modulus on Interfacial Crack Propagation and Its Application to Experimental Evaluation in Push-out Test)
	牧野　一成・五十嵐　泰昭・井上　忠信・北條　正樹・田中　基嗣・落合　庄治郎
	日本接着学会誌, 37巻 7号, 2001, pp.266-272.
1-29.	Interfacial Fracture in Model Composites under Static and Fatigue Loadings - Mechanism Consideration Based on Experimental and Analytical Approaches-
	Masaki Hojo, Keita Terashima, Yasuaki Igarashi, Minoru Shida, Shojiro Ochiai, Tadanobu Inoue, Yoshihiro Sawada and Yoshiharu Suzuki
	Materials Sci. Research Int., Vol.2, 2001, pp.189-196.
1-28.	多方向加工による均一微細フェライト粒組織の形成(Uniform Formation of Fine Grained Ferrite Structure through Multi-directional Deformation)
	鳥塚　史郎・井上　忠信・長井　寿
	日本鉄鋼協会鉄と鋼, Vol.86, No.12, 2000, pp.801-806.
1-27.	多方向加工によるひずみ分布の数値解析(Numerical Analysis of Plastic Strain Distribution through Multi-directional Deformation)
	井上　忠信・鳥塚　史郎・長井　寿
	日本鉄鋼協会鉄と鋼, Vol.86, No.12, 2000, pp.793-800.
1-26.	高強度鋼における水素割れ感受性の評価パラメータ(Parameters for the Evaluation of Hydrogen Embrittlement of High Strength Steel)
	高木　周作・井上　忠信・原　徹・早川　正夫・津崎　兼彰・高橋　稔彦
	日本鉄鋼協会鉄と鋼, Vol.86-10, 2000, pp.689-696.
1-25.	Disappearance Conditions of Thermal Stress Singularities Based on Stress Intensity in Two and Three-Phase Bonded Structures
	Tadanobu Inoue, Masaki Hojo and Shojiro Ochiai
	INTERNATIONAL JOURNAL OF FRACTURE, Vol.96,No.2, 1999, pp.179-201.
1-24.	異材界面端における熱応力場(Thermal Stress Field at the Interface Edge in Dissimilar Materials)
	井上　忠信・久保　司郎
	日本材料学会論文集, 48巻 4号, 1999-4, pp.365-375.
1-23.	異材界面端における圧縮残留応力の発生条件(Conditions of Compressive Residual Stress at the Interface Edge of Dissimilar Materials)
	井上　忠信・武藤　睦治・北條　正樹・落合　庄治郎
	溶接学会論文集, 17巻 1号, 1999, pp.120-129.
1-22.	Shear-Lag Simulation of the Progress of Interfacial Debonding in Unidirectional Composites
	Shojiro Ochiai, Masaki Hojo and Tadanobu Inoue
	COMPOSITE SCIENCE AND TECHNOLOGY, Vol. 59,No.1, 1999-1, pp.77-88.
1-21.	Influences of Residual Stresses Frictional Shear Stress at Debonded Interface and Interactions among Broken Components on Interfacial Debonding in Unidirectional Multi-filamentary Composites
	Shojiro Ochiai, Ikuo Okumura, Mototsugu Tanaka, Masaki Hojo and Tadanobu Inoue
	COMPOSITE INTERFACE, Vol. 5, No.4, 1998, pp.363-381.
1-20.	き裂が界面に到達した異材接合体の熱応力の理論解(Thermal Stress near Tip of Crack Terminating at Interface in Dissimilar Materials)
	井上　忠信・北條　正樹・落合　庄治郎
	日本材料学会論文集, 47巻 1号, 1998-1, pp.60-67.
1-19.	表面力を受ける異材接合体と温度変化を受けるそれの接合端における応力場の関係（第2報　応力場にlog r型の特異性が生じる場合）(Relation Between Stress Fields near Apex in Dissimilar Materials under Surface Tractions and Those under Thermal Loading（2nd Report, Stress Fields with Singularity of Type log r）)
	井上　忠信・落合　庄治郎・北條　正樹・矢田　敏夫
	日本機械学会論文集(A編), 63巻 610号, 1997-6, pp.1237-1242.
1-18.	平板内の楕円形開孔部に寸法および材質の異なる楕円板を接合するときに生ずる内部応力の推定(An Estimation of Internal Stresses Around a Dissimilar Ellipse Patch Jointed to on Elliptic Hole)
	矢田　敏夫・益子　淳也・井上　忠信
	日本機械学会論文集(A編), 63巻 610号, 1997-6, pp.1231-1236.
1-17.	表面力を受ける異材接合体と温度変化を受けるそれの接合端における応力場の関係（第1報　応力場に r^p-1型の特異性が生じる場合）(Relation Between Stress Fields near Apex in Dissimilar Materials under Surface Tractions and Those under Thermal Loading（1st Report, Stress Fields with Singularity of Type r^p-1）)
	井上　忠信
	日本機械学会論文集(A編), 63巻 609号, 1997-5, pp.931-938.
1-16.	Relaxation of Thermal Stresses in Dissimilar Materials (Approach Based on Stress Intensity)
	Tadanobu Inoue and Hideo Koguchi
	INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 34,No.25, 1997-9, pp.3215-3233.
1-15.	異材接合端における応力強さからの応力特異性の消失条件（第2報　３相異材接合体の場合）(Disappearance Conditions of Stress Singularity Based on Stress Intensity in Dissimilar Materials（2nd Report, In Case of Three-Phase Bonded Structure）)
	井上　忠信
	日本機械学会論文集(A編), 63巻 606号, 1997-2, pp.294-301.
1-14.	異材接合端における応力強さからの応力特異性の消失条件（第1報　ポアソン比が与える影響）(Disappearance Conditions of Stress Singularity Based on Stress Intensity in Dissimilar Materials（1st Report, Influence of Poisson's Ratio))
	井上　忠信
	日本機械学会論文集(A編), 62巻 604号, 1996-12, pp.2726-2733.
1-13.	Stress Singularity in Three-phase Bonded Structure
	Hideo Koguchi, Tadanobu Inoue and Toshio Yada
	ASME JOURNAL OF APPLIED MECHANICS, Vol. 63, No.2, 1996-6, pp.252-258.
1-12.	異材接合端における応力特異性の消失条件に対する新提案（応力強さからのアプローチ）(Suggestion for Disappearance Conditions of Stress Singularity in Dissimilar Materials（Approach Based on Stress Intensity))
	井上　忠信・古口　日出男
	日本機械学会論文集(A編), 62巻 593号, 1996-1, pp.41-48.
1-11.	Influence of the Intermediate Material on the Order of Stree Singularity in Three-Phase Bonded Structure
	Tadanobu Inoue and Hideo Koguchi
	INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 33,No.3, 1996-1, pp.399-417.
1-10.	異材接合端部における熱応力分布の特性（log r型⇔r^p-1型の特異性の変化に対する熱応力分布の変化）(Characteristics of Distribution of Thermal Stresses Near Apex in Dissimilar Materials（Change of Distribution of Thermal Streses on Vaviation of Singularity of Type log r⇔r^p-1))
	井上　忠信・古口　日出男
	日本機械学会論文集(A編), 61巻 591号, 1995-11, pp.2461-2468.
1-9.	Stress Singularity Near Apex in Three-Phase Bonded Structure (Effect of Elastic Property of Intermediate Material on Order of Stress Singularity)
	Tadanobu Inoue, Hideo Koguchi and Toshio Yada
	JSME International Journal (SERIES A), Vol.38,No.2, 1995-4, pp.163-170.
1-8.	異材接合端部における熱応力分布の基本的特性(Basic Characteristic on Distribution of Thermal Stresses near Apex in Dissimilar Materials)
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 61巻 581号, 1995-1, pp.65-72.
1-7.	異材接合体の接合端部における熱応力の理論解(Solution of Thermal Stress near Apex in Dissimilar Materials by Thermoelastic Theory)
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 61巻 581号, 1995-1, pp.73-79.
1-6.	表面に垂直力が作用する任意角度を有する3相異材接合体（第2報　応力場がr^-λおよびlog r型の特異性を持つ場合の変位分布）(Analysis near Apex in Three-Phase Bonded Material with Arbitrary Wedge Angles under Normal Surface Loading on the Surface（2nd Report, Distribution of Displacement in Stress Fields with Singularity of Type r^-λand log r))
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 60巻 578号, 1994-10, pp.2293-2297.
1-5.	表面に垂直力が作用する任意角度を有する3相異材接合体（第1報　応力場がr^-λおよびlog r型の特異性を持つ場合の応力分布）(Analysis near Apex in Three-Phase Bonded Material with Arbitrary Wedge Angles under Normal Surface Loading on the Surface（1st Report, Stress Distribution in Stress Fields with Singularity of Type r^-λand log r))
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 60巻 578号, 1994-10, pp.2286-2292.
1-4.	表面に垂直な力が作用する３相異材接合体の接合端部近傍の特異応力強さの分布(Distribution of Singular Stress Intensity at the Apex in Three-Phase Bonded Structure under Normal Loading on Its Surface)
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 59巻 567号, 1993-11, pp.2709-2716.
1-3.	表面力を受ける異材接合体の接合端部近傍における応力および変位場の解析(Analysis for Stress and Displacement Fields near the Apex in Bonded Dissimilar Materials under Surface Traction)
	井上　忠信・古口　日出男・矢田　敏夫
	日本機械学会論文集(A編), 59巻 564号, 1993-8, pp.1949-1955.
1-2.	３相異材接合体における接合端部近傍の応力特異性（応力特異性のオーダーに対する挟まれる材料の弾性特性の影響）(Stress Singularity Near the Apex in Three-Phase Bonded Structure(Effect of the Elastic Property for Intermediate Material on the Order of the Stress Singularity))
	古口　日出男・井上　忠信・矢田　敏夫
	日本機械学会論文集(A編), 59巻 560号, 1993-4, pp.1063-1068.
1-1.	３相異材接合体における接合端部の応力特異性(Stress Singularity at the Apex in Three Phase Bonded Structure)
	古口　日出男・井上　忠信・矢田　敏夫
	日本機械学会論文集(A編), 59巻 557号, 1993-1, pp.163-170.

InoinoWorld

論文

Related Link

Non-Related Link

総論文数: ９０（うち筆頭論文：４６）◆2012/04/16現在◆