2000

Nanocrystalline icosahedral phase formation in binary Zr-Pd and Zr-Pt alloys
B. S. Murty, D. H. Ping, M. Ohnuma, and K. Hono, Acta Mater. submitted.

Influence of heating rate on microstructure and magnetic properties of Fe₃B/Nd₂Fe₁₄B nanocomposite magnets
Y. Q. Wu, D. H. Ping, B. S. Murty, H. Kanekiyo, S. Hirosawa, and K. Hono, Scripta mater. submitted.

Nanoquasicrystallization of Zr-based metallic glasses
B. S. Murty and K. Hono, Mater. Sci. Eng. A, submitted.

Formation of nanocrystalline phases in glassy matrix in melt-spun Mg-Cu-Y alloys
B. S. Murty and K. Hono, Metall. Mater. Trans. JIM,

Nanoquasicrystallization of Zr-based metallic glasses
B. S. Murty, D. H. Ping and K. Hono, Appl. Phys. Lett. 76, 3971 - 3973 (2000).

Icosahedral phase formation by the primary crystallization of a Zr-Cu-Pd metallic glass
B. S. Murty, D. H. Ping, K. Hono and A. Inoue, Scripta mater., 42 (2000), in press.

Influence of oxygen on the crystallization behavior of Zr₆₅Cu_27.5Al_7.5 and Zr_66.7Cu_33.3 metallic glasses,
B. S. Murty, D. H. Ping, K. Hono and A. Inoue, Acta mater., (2000), in press.

Direct evidence for oxygen stabilization of icosahedral phase during crystallization of Zr₆₅Cu_27.5Al_7.5 metallic glass,
B. S. Murty, D. H. Ping, K. Hono and A. Inoue, Appl. Phys. Lett. 76, 55 - 57 (2000).

APFIM and TEM study of the oxygen behavior during cry stallization of Zr₆₅Cu_27.5Al_7.5 metallic glass
B. S. Murty, D. H. Ping, K. Hono and A. Inoue, Mater. Sci. Eng. A. in press.

1998

Novel materials synthesis via mechanical alloying
B.S. Murty and S. Ranganathan, Int. Mater. Rev. (in Press)

Development of fast acting and long lasting grain refiner (Al-5Ti-1B) for aluminium and its alloys
M. Chakraborty, B.S. Murty and K.V.S. Prasad, IIF Trans., 1998, 99-114.

Poisoning phenomenon during the grain refinement of Al-X (X=Cr,Zr,Si) alloys by Al-5Ti-1B master alloy
B.S. Murty, A. Arjuna Rao, S.A. Kori and M. Chakraborty, Proceedings of Int. Conf. on Aluminium (INCAL'98), 299-306, 1998.

Role of manufacturing process parameters on the grain refining characteristics of Al-5Ti-1B master alloys
M. Chakraborty, B.S. Murty and K.V.S. Prasad, Proceedings of Int. Conf. on Aluminium (INCAL'98), 291-298, 1998.

1997

The role of Zr and impurities in the grain refinement of Al with Al-Ti-B
Arjuna Rao, B.S. Murty and M. Chakraborty, Mater. Sci. Tech., 1997, 13, 769-777.

Ordering characteristics of nickel aluminides synthesised by mechanical alloying
B.S. Murty, J. Joardar and S.K. Pabi, Mater. Sci. Eng. A, 1997, Suppliment, 41-44.

On the energy criteria in the production of disordered NiAl by mechanical alloying
J. Joardar, S.K. Pabi and B.S. Murty, in Proc. of Int. Conf. on Recent Advances in Metallurgical Processes, Eds. D.H. Sastry et. al., New Age Int. Publ., 1997, 647-652.

Preparation of metal nanosuspensions by high pressure DC-sputtering on running fluids
M. Wagener, B.S. Murty and B. Guenther, Mater. Res. Symp. Proc. 1997, 457, 149-154.

Nanocrystalline phases in Cu-Ni, Cu-Zn and Ni-Al systems by mechanical alloying
S.K. Pabi, J. Joardar, I. Manna and B.S. Murty, Nano Structured Mater., 1997, 9, 149-152.

Poisoning effect in the grain refinement of Al-Zr alloys
M. Chakraborty, A. Arjuna Rao and B.S. Murty, Scanning, 1997, 19, 195-196

1996

Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying
S.K. Pabi and B.S. Murty, Bull. Mater. Sci., 1996, 19, 939-956.

Influence of chromium and impurities on the grain refining behavior of aluminium
Arjuna Rao, B.S. Murty and M. Chakraborty, Metall. Mater. Trans., 1996, 27A, 791-800.

Synthesis of nanocrystalline NiAl over a wide composition range by mechanical alloying
B.S. Murty, K.H.S. Singh and S.K. Pabi, Bull. Mater. Sci., 1996, 19, 565-571.

Scanning electron microscopy studies on poisoning phenomena in the grain refinement of Al alloys
M. Chakraborty, A. Arjuna Rao and B.S. Murty, Scanning, 1996, 18, 227-228.

Formation of nanocrystalline phases in Cu-Zn system during mechanical alloying
S.K. Pabi, J. Joardar and B.S. Murty, J. Mater. Sci., 1996, 31, 3207-3211.

Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl
B.S. Murty, J. Joardar and S.K. Pabi, Nano Structured Mater., 1996, 7, 691-697.

Mechanism of mechanical alloying in Ni-Al and Cu-Zn systems
S.K. Pabi and B.S. Murty, Mater. Sci. Eng., 1996, A214, 146-152.

Nanostructured Ti-Ni alloys : A comparison of processing routes
S. Ranganathan, B.S. Murty, R. Nagarajan, K. Chattopadhyay, in Processing and Properties of Nanocrystalline Materials, (Eds.) C. Suryanarayana, J. Singh and F.H. Froes, TMS, Warrendale, PA, 1996, pp. 37-48.

Reaction of fluoride salts with aluminium
K.V. Srinivasa Prasad, B.S. Murty, P.G. Mukunda, M. Chakraborty, Mater. Sci. Tech., 1996, 12, 766-770.

Response of an Al-Cr alloy towards grain refinement by Al-5Ti-1B master alloy
Arjuna Rao, B.S. Murty and M. Chakraborty, Int. J. Cast Metals Res., 1996, 9, 125-132.

Effect of non-stoichiometry on the ordering behavior of nanocrystalline NiAl produced by mechanical alloying
B.S. Murty, J. Joardar and S.K. Pabi, J. Mater. Sci. Lett., 1996, 15, 2171-2172.

1995

Milling maps and amorphization during mechanical alloying
B.S. Murty, M. Mohan Rao and S. Ranganathan, Acta Metall. Mater., 1995, 43, 2443-2450.

Differences in the glass forming ability of rapidly solidified and mechanically alloyed Ti-Ni-Cu alloys
B.S. Murty, M. Mohan Rao and S. Ranganathan, Mater. Sci. Eng., 1995, A196, 237-241.

Thermodynamics of glass formation in pure metals
B.S. Murty, M. Mohan Rao and S. Ranganathan, CALPHAD, 1995, 19, 197-304.

1994

Effect of hot rolling on the grain refining efficiency of Al-Ti and Al-Ti-B master alloys
K.V. Sreenivasa Prasad, A. Arjuna Rao, R.S. Dutta, B.S. Murty and M. Chakraborty, IIF Trans., 1994, 62, 321-326.

Metal-mould reactions in casting high Cr-Ni heat resistant stainless steel with CO₂ sands
H. Behera, B.S. Murty and M. Chakraborty, IIF Trans., 1994, 61, 207-216.

An Al-Ti-B master alloy for grain refinement of Al and its alloys
Arjun Rao, K.V. Sreenivasa Prasad, B.S. Murty and M. Chakraborty, Ind. Foundry J., Aug. 1994, 7-15.

Nanocrystals in Ti based systems by mechanical alloying
R. Nagarajan, B.S. Murty and S. Ranganathan, Chinese J. Mater. Res., 1994, 215-220.

X-ray photoelectron spectroscopic studies of thick protective tin overlayer on copper
S.K. Shee, B.S. Murty, M. Chakraborty and T.B. Ghosh, Trans. Metal Finishers Association, 1994, 3, 49-54.

1993

Thermodynamics of solid state amorphization by mechanical alloying
B.S. Murty, S. Ranganathan and M. Mohan Rao, in Metastable microstructures - principles, design and applications, (Eds.) D. Banerjee and L.A. Jacobson, Oxford Publishing Co., New Delhi, 1993, pp. 239-246.

Mechanical alloying - a novel synthesis route for amorphous phases
B.S. Murty, Bull. Mater. Sci., 1993, 16, 1-17.

Nanocrystalline phase formation and extension of solid solubility by mechanical alloying in Ti based systems
B.S. Murty, M. Mohan Rao and S. Ranganathan, Nano tructured Mater., 1993, 3, 459-467.

Crystallization studies on amorphous Al-Y-Ni and Al-Y-Cu alloys
Ankur Goyal, B.S. Murty and S. Ranganathan, J. Mater. Sci., 1993, 28, 6091-6095.

Reactions between high Cr-Ni heat resistant stainless steels and No-bake moulds during casting
H. Behera, B.S. Murty and M. Chakraborty, Proc. of Eastern Regional Conf. on Changing senario - an opportunity for Indian Foundry-men, IIF, 1993, P8/1-8/19.

1992

Solid state amorphization in binary Ti-Ni, Ti-Cu and ternary Ti-Ni-Cu system by mechanical alloying
B.S. Murty, S. Ranganathan and M. Mohan Rao, Mater. Sci. Eng., 1992, A149, 231-240.

Glass forming composition range in Al-Ti system by mechanical alloying
B.S. Murty, M.D. Naik, S. Ranganathan and M. Mohan Rao, Materials Forum, 1992, 16, 19-26.

1990

Synthesis of amorphous phase in Ti-Ni-Cu system by mechanical alloying
B.S. Murty, M. Mohan Rao and S. Ranganathan, Scripta Metall. Mater., 1990, 24, 1819-1824.